View source for KAVAN V20 - Changing the mode/fr

<languages/>
=== Introduction ===

Changer le mode de vol est simple et rapide si vous suivez la bonne procédure. Veuillez vous référer aux étapes ci-dessous pour modifier le mode de vol de votre émetteur, ou si vous souhaitez définir le retour des bâtons.

[[File:V20 - Gimbal adjustment.png|frameless|920x920px]]

<div lang="en" dir="ltr" class="mw-content-ltr">
==== Description ====
# Horizontal centring tension spring - right gimbal
# Ratcheting adjustment screw - right gimbal
# Brake/resistance adjustment screw - right gimbal
# Centring spring lock
# Vertical centring tension spring - right gimbal
# Ratcheting adjustment screw - left gimbal
# Brake/resistance adjustment screw - left gimbal
# Vertical centring tension spring - left gimbal
# Hole for the centring spring lock
# Horizontal centring tension spring - left gimbal
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== Steps ====
# Remove the battery compartment cover.
# Unplug and remove the battery from the battery compartment.
# Holding the handle in your hands carefully remove the rear cover. Be careful not to pull the antennas.
# Rotate and flip the rear cover to make some space.
# Unscrew the centring spring lock from the current throttle stick.
# On the current throttle side tighten the vertical tension spring counterclockwise so the stick centres.
# On the opposite side loosen the vertical tension spring clockwise.
# Lift the centring arm a little and insert and screw in the centring spring lock on the new throttle stick side.
# Set the feedback of both gimbals to your preference via the steps below.
# Put the rear cover back in place.
# Screw in the 4 screws on the rear cover.
# Plug in and insert the transmitter battery in the battery tray.
# Put the battery tray cover on.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== Setting the gimbal feedback ====
# Screws on the inner side of the strip (2, 6) set the gimbal tension.
# Screws on the outer side of the strip (3, 7) set the ratcheting.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Video tutorial ===
If you're not feeling confident enough after reading these steps, please follow our video tutorial.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/yZzQqn0d0Tk?si=7VDW9TQWUV5LOCpt" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html>
</div>