View source for KAVAN V20 - Updating the firmware/fr

<languages/>
=== Introduction ===
Garder le firmware à jour est crucial pour s'assurer que les fonctions fonctionnent correctement.

==== Vous aurez besoin de ====
* Ordinateur
* Logiciel ETHOS Suite (Téléchargement : [https://ethos.frsky-rc.com ethos.frsky-rc.com], ou pour les utilisateurs avancés : [https://github.com/FrSkyRC/ETHOS-Feedback-Community/releases github.com/FrSkyRC])
* Câble USB-C

<div lang="en" dir="ltr" class="mw-content-ltr">
==== Procedure ====
# Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
# Start the ETHOS Suite software.
# Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
# Open the Ethos menu in the left bar.
# Choose the preferred interface and audio languages you want to download.
# Press the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
# Wait for the update to finish.
# After the update finishes, press the "EJECT DRIVES" button.
# Disconnect the V20 from the computer and turn it off.
# Turn it on again and make sure everything works correctly.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Video tutorial ===
If you're not feeling confident enough after reading these steps, please follow our video tutorial.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
<html><iframe width="560" height="315" src="https://www.youtube.com/embed/SSpv3Ce6Dr8?si=-0XdiYj2bgLKNutQ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html>
</div>