View source for KAVAN V20 - Updating the firmware

<languages/>
<translate>
<!--T:1-->
=== Introduction ===
Keeping the firmware up to date is crucial to ensure the functions are working correctly.

<!--T:2-->
==== You will need ====
* Computer
* ETHOS Suite software (Download: [https://ethos.frsky-rc.com ethos.frsky-rc.com], or for advanced users: [https://github.com/FrSkyRC/ETHOS-Feedback-Community/releases github.com/FrSkyRC])
* USB-C cable

<!--T:3-->
==== Procedure ====
# Turn on the V20 in the bootloader mode by pressing and holding the multifunction knob and pressing the power button.
# Start the ETHOS Suite software.
# Connect the V20 to the computer via USB-C. Your V20 will get automatically detected and loaded in the ETHOS Suite.
# Open the Ethos menu in the left bar.
# Choose the preferred interface and audio languages you want to download.
# Press the download button next to the "WRITE OUTDATED COMPONENTS" drop-down menu.
# Wait for the update to finish.
# After the update finishes, press the "EJECT DRIVES" button.
# Disconnect the V20 from the computer and turn it off.
# Turn it on again and make sure everything works correctly.

<!--T:4-->
=== Video tutorial ===
If you're not feeling confident enough after reading these steps, please follow our video tutorial.

<!--T:5-->
<div class="videoWrapper"><html><iframe class="video" src="https://www.youtube.com/embed/SSpv3Ce6Dr8?si=-0XdiYj2bgLKNutQ" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html></div>
</translate>