View source for FrSky MC30R Gimbals - Setup guide/cs

<languages/>
<div lang="en" dir="ltr" class="mw-content-ltr">
=== Introduction ===
To find your best RC transmitter setup is now even easier and faster. KAVAN V20 Pro is made by FrSky and boasts the new revolutionary gimbals MC30R, fully adjustable from the front. They are designed for RC planes, perfect for helicopters and compatible with various radio-controlled models, such as drones, cars, or boats. Combined with the ETHOS operating system for remote control and many compatible receivers at your disposal, you will achieve the top settings for your radio control in no time.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Gimbal description ===
[[File:MC30R_-_Description.png|right|frameless|500x500px]]
# Vertical axis
# Horizontal axis
# Horizontal axis resistance
# Horizontal axis travel limiter
# Non-centring vertical axis stiffness
# Self-centring
# Centring vertical axis resistance
# Ratcheting
# Vertical axis travel limiter
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 1. Vertical axis ====
Controls the pitch axis (elevator) or speed (throttle).
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 2. Horizontal axis ====
Controls the roll axis (ailerons) or yaw axis (rudder).
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 3. Horizontal axis RESISTANCE ====
Adjusts the tension of the horizontal axis self-centring spring. Loosening the screw reduces the centring spring force, therefore slowing down the horizontal axis's return to the neutral position.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 4. Horizontal axis travel limiter ====
Adjusts the mechanical travel range limiter of the gimbal's whole horizontal axis.  By tightening the screw, the maximum deflection from the centre position can be set between 22.5° and 30°.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 5. Non-centring vertical axis stiffness ====
Adjusts the overall stiffness of the vertical axis movement of the gimbal.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 6. Self-centring ====
Adjusts the self-centring mode of the gimbal. Tightening the screw disables self-centring (the „throttle stick“ does not return to the neutral position). Loosening the screw enables self-centring.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 7. Centring vertical axis resistance ====
Adjusts the self-centring spring tension of the vertical axis when self-centring is enabled. Loosening the screw reduces the centring spring force and therefore slows down the vertical axis's return to the neutral position.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 8. Ratcheting ====
Adjusts the ratcheting effect of the gimbal's vertical axis. When fully tightened, the ratcheting effect is at its maximum. When fully loosened, the vertical axis movement is smooth.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
==== 9. Vertical axis travel limiter ====
Adjusts the mechanical travel range limiter of the gimbal's whole vertical axis. By tightening the screw, the maximum deflection from the centre position can be set between 22.5° and 30°.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
=== Tutorial ===
How to change the mode on the KAVAN V20 Pro RC transmitter? It's a matter of just a few seconds. A couple of screwdriver turns, an even quicker setup directly in the transmitter, and that's it. Watch the video tutorial to see how to do it.
</div>

<div lang="en" dir="ltr" class="mw-content-ltr">
<div class="videoWrapper"><html><iframe width="560" height="315" src="https://www.youtube.com/embed/YIRjLA-7kQg?si=ri1vG2HdbcJLN6_j" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html></div>
</div>

[[Category:Unfinished]][[Category:Unpublished]]