View source for KAVAN V10 - Operating system ECOS user manual

== Introduction ==
The operating system ECOS is a new streamlined interface for monochrome-display radios. It inherits the logic of the ETHOS operating system, making it simple to learn and fast to operate.

If you have any questions about the V5 transmitter and its operation, please contact the technical and service staff at KAVAN Europe s.r.o. by e-mail ('''info@kavanrc.com''' for general technical information, '''service@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8 am–4 pm CET, Monday to Friday).

== Main View ==
This is the default screen during operation or idling. It displays the model name, trim values, current channel output values and the remaining radio battery charge.

The transmitter V10 uses a set of navigational buttons combined with a Multifunction Knob. Each of the navigational buttons opens a dedicated menu (Channels Monitor, Model Settings, Radio Settings, Telemetry). The ENTER button (centre) lists through the menu pages. Scrolling the Multifunction Knob navigates through the items of the menu, and pressing it opens the item options. V10's user interface is optimised to operate with the Multifunction Knob.

{| class="wikitable" style="text-align: center; width: 100%;"
!Main view
!Button
!Menu
|-
| rowspan="4"|[[File:ECOS - 00 Main View.png|frameless]]
|<code>'''ENTER'''</code>
|[[File:ECOS - 01 Channels Monitor.png|frameless]]
|-
|<code>'''SYSTEM'''</code>
|[[File:ECOS - 02 Model Settings.png|frameless]]
|-
|<code>'''MODEL'''</code>
|[[File:ECOS - 03 Radio Settings.png|frameless]]
|-
|<code>'''DISPLAY'''</code>
|[[File:ECOS - 04 Telemetry Settings.png|frameless]]
|-
|}


=== Channels Monitor ===
[[File:ECOS - 01 Channels Monitor.png|300x300px|right|frameless]]
This menu shows the current output values of each channel, such as the actual aileron deflection or throttle power. Here you may spot the neutral discrepancies before performing [[#Analog calibration|'''Analog calibration''']].

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the channels CH1–CH24.

Press <code>'''BACK'''</code> button to return to the '''MAIN VIEW'''.
<div style="clear:both;"></div>

=== Model Settings ===
[[File:ECOS - 02 Model Settings.png|300x300px|right|frameless]]
This menu contains all settings related to your model.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the options.

Press <code>'''ENTER'''</code> button to expand the selected option.

Press <code>'''BACK'''</code> button to return to the '''MAIN VIEW'''.
<div style="clear:both;"></div>

=== Radio Settings ===
[[File:ECOS - 03 Radio Settings.png|300x300px|right|frameless]]
This menu contains all settings related to the properties of your transmitter.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the options.

Press <code>'''ENTER'''</code> button to expand the selected option.

Press <code>'''BACK'''</code> button to return to the '''MAIN VIEW'''.
<div style="clear:both;"></div>

=== Telemetry Settings ===
[[File:ECOS - 04 Telemetry Settings.png|300x300px|right|frameless]]
This menu contains all settings related to the telemetry sensors. Without any telemetry devices connected, it displays the received signal strength and the receiver battery voltage.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the options.

Press <code>'''ENTER'''</code> button to expand the selected option.

Press <code>'''BACK'''</code> button to return to the '''MAIN VIEW'''.
<div style="clear:both;"></div>

== Model settings ==
===Model Select===
[[File:ECOS - Model Select.png|300x300px|right|frameless]]
This menu contains 32 slots for storing your models. Each model has a unique ID (01–32) and a custom name. The active model is marked by a star symbol.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the model slots.

Press <code>'''ENTER'''</code> button to open the slot's options.

Press <code>'''BACK'''</code> button to return to the first model, and press it a second time to return to '''MODEL SETTINGS'''.

<div style="clear:both;"></div> 
----

[[File:ECOS - Model Select - New.png|300x300px|right|frameless]]
====Selecting a free slot:====
* [[#Create model|'''Create model''']]. When creating a new model, you have '''AirSoccer''', '''Airplane''', '''Glider''', '''Heli''', '''Multi''' and '''Other''' presets to choose from, each containing a general channel layout. '''Glider''' further contains '''Normal''' and '''V-tail''' configurations. '''Airplane''' presets are '''Normal''', '''Delta''' and '''V-tail'''.
<div style="clear:both;"></div>
----

[[File:ECOS - Model Select - Existing.png|300x300px|right|frameless]]
====Selecting a non-active model slot:====
* '''Select model''' to make it active.
* '''Clone''' this model. It creates a new model in the next free slot with the same settings.
* '''Move up''' or '''Move down''' the model in the list (swapping the IDs with the above or below model).
* '''Delete''' your model.
<div style="clear:both;"></div>
---- 

[[File:ECOS - ModelSelect Active.png|300x300px|right|frameless]]
====Selecting the active model:====
* '''Clone''' this model. It creates a new model in the next free slot with the same settings.
* '''Move up''' or '''Move down''' the model in the list (swapping the IDs with the above or below model).
<div style="clear:both;"></div> 
----

[[File:ECOS - Create Model.png|300x300px|right|frameless]]
[[File:ECOS - Create Model - Airplane.png|300x300px|right|frameless]]
[[File:ECOS - Airplane Menu.png|300x300px|right|frameless]]
==== Create model ====
When creating a new model, use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through name option and pre-assigned channels.

When choosing a new name, use <code>'''ENTER'''</code> button to list through the character slots.

Select a new character by listing through the available set with <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons. You can select the uppercase (A–Z) and lowercase (a–z) alphabet, numbers 0–9 and special characters space and hyphen.

After the name is put in, press the <code>'''BACK'''</code> button to return to the list.

Each pre-set channel can be later re-assigned to another control function in the [[#Edit Model|'''Edit model''']] option.

Select '''Create model''' on the bottom of the screen by pressing <code>'''ENTER'''</code> to confirm the model creation.
<div style="clear:both;"></div>

=== Edit Model ===
[[File:ECOS - Edit Model.png|300x300px|right|frameless]]
This menu is used to edit the chosen model name and timers, register and bind up to 3 receivers for [[#Redundancy|'''Redundancy''']] connection.
<div style="clear:both;"></div>

==== Model name ====
[[File:ECOS - EditModel Name.png|300x300px|right|frameless]]
You can rename the selected model.

When choosing a new name, use <code>'''ENTER'''</code> button to list through the character slots.

Select a new character by listing through the available set with <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons. You can select the uppercase (A–Z) and lowercase (a–z) alphabet, numbers 0–9 and special characters space and hyphen.

After the name is put in, press the <code>'''BACK'''</code> button to return to the list.
<div style="clear:both;"></div>
----

==== Timer 1, 2 ====
[[File:ECOS - EditModel Timer.png|300x300px|right|frameless]]
[[File:ECOS - EditModel TimerCond.png|300x300px|right|frameless]]
Timer options are collapsed by default (symbol ">" at the end of the line).

Expand the timer settings by pressing the <code>'''ENTER'''</code> button.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to list through the values of each parameter, and press <code>'''ENTER'''</code> button to list through the character slots in the timer string setting.


* '''Timer''' can be turned '''ON''' or '''OFF'''
* '''Mode''' can work in a stopwatch ('''UP''') or countdown ('''DOWN''') mode.
* '''Alarm''' sets the time period after which you are notified by a beep alert.
* '''Start condition''' sets the switch position that starts the timer.
** '''Always on''' - the timer is running continuously.
** '''SA Up''' - the timer runs when the '''SA''' is in the '''Up''' position.
** '''! SA Up''' - the timer runs when the '''SA''' is '''not''' in the '''Up''' position.
** '''SA – ''' - the timer runs when the the '''SA''' is in the '''Centre''' position.
** '''! SA –''' - the timer runs when the the '''SA''' is '''not''' in the '''Centre''' position.
** '''SA Dn'''- the timer runs when the '''SA''' is in the '''Down''' position.
** '''! SA Dn''' - the timer runs when the '''SA''' is '''not''' in the '''Down''' position.
** '''SB Up''' - the timer runs when the '''SB''' is in the '''Up''' position.
** '''! SB Up''' - the timer runs when the '''SB''' is '''not''' in the '''Up''' position.
** '''SB Dn'''- the timer runs when the '''SB''' is in the '''Down''' position.
** '''! SB Dn''' - the timer runs when the '''SB''' is '''not''' in the '''Down''' position.
** '''SC Up''' - the timer runs when the '''SC''' is in the '''Up''' position.
** '''! SC Up''' - the timer runs when the '''SC''' is '''not''' in the '''Up''' position.
** '''SC Dn'''- the timer runs when the '''SC''' is in the '''Down''' position.
** '''! SC Dn''' - the timer runs when the '''SC''' is '''not''' in the '''Down''' position.
* '''Reset''' - resets the timer to the set value (if in '''Down''' mode) or to zero (if in '''Up''' mode). It uses the same logic of assigning switches as an active condition.
<div style="clear:both;"></div>
----

==== Internal RF ====
[[File:ECOS - EditModel IntRF.png|300x300px|right|frameless]]
[[File:ECOS - EditModel RX bind.png|300x300px|right|frameless]]
* '''Mode''' selects the radio mode according to the protocol of your receiver
** '''OFF''' - the radio transmission is turned off.
** '''ACCESS''' - the radio is in the ACCESS transmission protocol mode
** '''ACCST D16''' - the radio is in the ACCST D16 transmission protocol mode
* '''Ch. Range''' sets the maximum channel range
** '''CH1–8''' - Available in all modes. Allows you to activate the '''Racing mode'''.
*** '''Racing mode''' offers superior latency (~ 4 ms), but works only with digital servos and with a maximum of 8 channels.
** '''CH1–16''' - Available in all modes.
** '''CH1–24''' - Available in '''ACCESS''' mode only.
* '''RxNum''' allows you to define a custom receiver ID (00–63). The naming of the receiver is done automatically when the receiver is paired for the first time. This name can be changed at any time.
* '''Failsafe''' emergency rates are available in 5 modes:
** '''None set''' - the Failsafe emergency mode is turned off.
** '''Hold''' - the receiver maintains the rates as they were before the signal was lost.
** '''Custom''' - the receiver keeps the rate value on all channels as you preselect it. You can choose a mode on each channel separately.
** '''No pulses''' - when the signal is lost, the receiver does not send a control signal to the rates on any channel. To use this type, select it from the menu and wait 9 seconds for the Fail-safe setting change to take effect.
** '''Receiver''' - inherits the Fail-safe settings of your receiver.
* '''Module''' - allows you to register ('''[Reg]''') a new receiver and to check its operational range ('''[Rng]''')
* '''Options''' - ''TBD''
<div style="clear:both;"></div>
----

==== Receiver 1, 2, 3 ====
[[File:ECOS - EditModel RXbound.png|300x300px|right|frameless]]
[[File:ECOS - EditModel RXmenu.png|300x300px|right|frameless]]
[[File:ECOS - EditModel RXconfig.png|300x300px|right|frameless]]
Allows you to bind ('''[Bnd]''') the registered receiver. For the redundancy connection, you can bind up to 3 receivers at the same time.

When the receiver is bound, use the <code>'''ENTER'''</code> button to open the receiver options.


* '''Bind''' will call out the binding process for a re-binding.
* '''Options''' include the general settings for your receiver.
** '''7ms PWM'''
** '''Telem. disabled''' disables the telemetry transmission.
** '''25mW Tele''' limits the radiated power of the telemetry transmission to 25 mW for use in regulated regions.
** '''SBUS24''' switches between SBUS16 (default) and SBUS24 channel modes.
** '''Bus Invert''' inverts/swaps the SBUS orientation
** '''Telemetry port''' switches between '''S.Port''', '''F.Port''' and '''F.Bus''' interfaces for transmitting the telemetry.
* '''Share''' - ''TBD''
* '''Delete''' removes the bounded receiver, including the registration.
* '''Reset''' removes the bounded receiver.
<div style="clear:both;"></div>

=== Flight Modes ===
[[File:ECOS - Model Settings Flight Modes.png|300x300px|right|frameless]]
[[File:ECOS - Flight Modes.png|300x300px|right|frameless]]
[[File:ECOS - Flight Modes - Fade In.png|300x300px|right|frameless]]
[[File:ECOS - Flight Modes Check FM0 Trims.png|300x300px|right|frameless]]
Flight modes allow you to pre-set trim values for up to 9 setups, with FM0 being the regular flight mode that can't be enabled or disabled by a switch.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through flight modes.

Press the <code>'''ENTER'''</code> button to open the flight mode options.


* '''Mode name''' allows you to set a 3-character custom name for the flight mode.
* '''Trims''' set the trim value to apply in the selected flight mode.
* '''Fade in''' sets the ease-in/delay of the control servo movement from the current position to the target position.
* '''Fade out''' sets the ease-out/delay of the control servo movement from the target position to the current position.
* '''Global variables''' let you to use up to 9 [[#Global variables|'''Global variables''']] (G1–G9) for each of the flight modes.

'''Check FM Trims''' - ''TBD'' (temporarily disables the trim settings of the active Flight mode and uses the default regular flight mode trim settings.)

<div style="clear:both;"></div>

=== Mixes ===
[[File:ECOS - Mixes_List.png|300x300px|right|frameless]]
[[File:ECOS - Mixes_Settings.png|300x300px|right|frameless]]
[[File:ECOS - Mixes_Name.png|300x300px|right|frameless]]
[[File:ECOS - Mixes_CH.png|300x300px|right|frameless]]
This menu contains 32 possible channel mixes. First slots are automatically filled in during the model creation. They act as a solo or multi-channel modifier controlled by a switch or channel value with various settings available.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the Mix slots.

Press <code>'''ENTER'''</code> button to open the mix slot options.

Press <code>'''BACK'''</code> button to return to the first Mix, and press it a second time to return to '''MODEL SETTINGS'''.


* '''Edit'''
** '''Name''' allows you to set a custom 3-character name for each Mix.
** '''Input''' chooses the switch or function to enable the Mix.
** '''Operation''' sets how different inputs multiplex with the control channel.
*** '''Add''' - the Mix value and the channel value are summed/added up.
*** '''Multiply''' - the Mix value and the channel value are multiplied.
*** '''Replace''' - the Mix value completely overrides the channel value.
** '''Curve''' allows you to choose a preset curve (CV1–CV32) for controlling the Mix.
** '''Weight/rate''' is used to blend the control movements for an optimal control feel and authority.
** '''Mode''' sets, in which of the 9 flight modes is the Mix active.
** '''Switch''' selects which switch position activates the Mix, or whether it is always on.
** '''Trim''' selects the physical trim to use for trimming the Mix.
** '''CH Count''' sets the number of channels the selected Mix uses.
** '''Output 1–24''' sets the channel, which is controlled by the Mix.
* '''Move Up''' or '''Move Dn''' the mix in the list (swapping positions with the above or below Mix).
* '''Delete''' the Mix.
* '''Clone''' this Mix. It creates a new Mix in the next free slot with the same settings.

<div style="clear:both;"></div>

=== Outputs ===
[[File:ECOS - Outputs.png|300x300px|right|frameless]]
[[File:ECOS - Outputs_CH1.png|300x300px|right|frameless]]
[[File:ECOS - Outputs_Subtrim.png|300x300px|right|frameless]]
The outputs menu contains the options to adjust each output channel's values.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the channels CH1–CH24.

Press <code>'''ENTER'''</code> button to open the slot's options.

Press <code>'''BACK'''</code> button to return to the first Mix, and press it a second time to return to '''MODEL SETTINGS'''.


* '''Name''' sets a custom 3-character name of the channel.
* '''Direction''' inverts the operation direction of the channel.
* '''Min''' sets the channel's lower value limit.
* '''Max''' sets the channel's upper value limit.
* '''Subtrim''' applies a subtrim to the output channel.
* '''PWM Center''' sets the channel's PWM signal neutral value.

<div style="clear:both;"></div>

=== Curves ===
[[File:ECOS - Curves.png|300x300px|right|frameless]]
[[File:ECOS - Curves_Settings.png|300x300px|right|frameless]]
[[File:ECOS - Curves_Custom.png|300x300px|right|frameless]]
[[File:ECOS - Curves_Edit.png|300x300px|right|frameless]]
The curves menu allows you to set up to 32 custom channel output curves.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the curve slots CV1–CV32.

Press <code>'''ENTER'''</code> button to open the curve's options.

Press <code>'''BACK'''</code> button to return to the curves list, and press it a second time to return to '''MODEL SETTINGS'''.


* '''Name''' sets a custom 6-character name of the curve.
* '''Type''' sets the type of the curve:
** '''Standard''' allows adjusting the curve in up to 17 points. Each point can be shifted on the vertical (y) axis only.
** '''Custom''' allows adjusting the curve in up to 17 points. Each point can be shifted on the vertical (y) and horizontal (x) axes.
*** '''Count''' sets the number of adjustable points on the curve.
*** '''Smooth''' makes the curve rounded at the tangents of the points, removing the sharp angles.
** '''Expo''' sets the exponential curve without points.
*** '''Height''' sets the limits on the vertical axis, decreasing the maximum throw.
*** '''Offset''' shifts the curve along the vertical axis.
*** '''Expo''' changes the slope of the curve.

<div style="clear:both;"></div>

=== Logic switches ===
[[File:ECOS - LogicSwitches.png|300x300px|right|frameless]]
[[File:ECOS - LogicSwitches_Edit.png|300x300px|right|frameless]]
[[File:ECOS - LogicSwitches_V2.png|300x300px|right|frameless]]
[[File:ECOS - LogicSwitches_Duration.png|300x300px|right|frameless]]
This menu allows setting up 32 logic switches. They are defined by a logical expression and can be assigned as a regular switch.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the logical switch slots LS1–LS32.

Press <code>'''ENTER'''</code> button to open the switch options.

Press <code>'''BACK'''</code> button to return to the logic switches list, and press it a second time to return to '''MODEL SETTINGS'''.


*'''Function''' selects the logical expression that defines ON/OFF condition.
*'''V1''' defines the first variable in the logical expression.
*'''V2''' defines the second variable in the logical expression.
*'''AND Switch''' selects the physical switch that turns the logic switch ON/OFF.
*'''Delay''' sets the delay before the logic switch switches ON after matching the condition.
*'''Duration''' sets the time logic switch stays ON after matching the condition.


{| class="wikitable" style="text-align: center;"
|-
|'''a=x'''
|ON when the source V1 exactly matches the set constant V2.
|-
|'''a"x'''
|ON when the source V1 approximately matches the set constant V2.
|-
|'''a>x'''
|ON when the source V1 is greater than the set constant V2.
|-
|'''a<x'''
|ON when the source V1 is smaller than the set constant V2.
|-
|''' ❘a❘>x '''
|ON when the source V1's absolute value is greater than the set constant V2.
|-
|''' ❘a❘<x'''
|ON when the source V1's absolute value is smaller than the set constant V2.
|-
|'''AND'''
|ON when both sources V1 and V2 are true. 
|-
|'''OR'''
|ON when either of sources V1 and V2 is true. 
|-
|'''XOR'''
|ON when sources V1 and V2 do not match.
|-
|'''Edge'''
|TBD
|-
|'''a=b'''
|ON when the source V1 exactly matches the source V2.
|-
|'''a>b'''
|ON when the source V1 is greater than the source V2.
|-
|'''a<b'''
|ON when the source V1 is smaller than the source V2.
|-
|'''d>x'''
|ON when the difference of changed values of the source V1 is greater than the constant V2.
|-
|'''❘d❘>x'''
|ON when the absolute difference of changed values of the source V1 is greater than the constant V2.
|-
|'''Timer'''
|ON and OFF in a cycle with a duration of constant V1 and a delay of constant V2.
|-
|'''Sticky'''
|TBD
|-
|}

<div style="clear:both;"></div>

=== Special functions ===
[[File:ECOS - SpecialFunction.png|300x300px|right|frameless]]
[[File:ECOS - SpecialFunction_FS.png|300x300px|right|frameless]]
[[File:ECOS - SpecialFunction_Vario.png|300x300px|right|frameless]]
This menu allows assigning up to 7 special functions.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to navigate through the special functions slots SF1–SF7.

Press <code>'''ENTER'''</code> button to open the special function options.

Press <code>'''BACK'''</code> button to return to the special functions list, and press it a second time to return to '''MODEL SETTINGS'''.

*'''Action''' chooses the function.
**'''Reset''' resets the timers.
***'''Reset''' defines which timers to reset.
**'''Set failsafe''' sets the Fail-safe emergency rates.
***'''Module''' defines which module's Fail-safe settings to use.
**'''Play vario''' enables the vario telemetry beeps.
***'''Source''' chooses the vario channel.
*'''State''' enables the special function.
*'''Active condition''' sets the conditions for activating the special function.

<div style="clear:both;"></div>

=== Trainer ===
[[File:ECOS - Trainer_Master.png|300x300px|right|frameless]]
[[File:ECOS - Trainer_Slave.png|300x300px|right|frameless]]
This menu contains trainer mode settings. Trainer mode is supported via a cable with 3.5mm Stereo connectors.

Press <code>'''ENTER'''</code> button to open the Trainer options.

Press <code>'''BACK'''</code> button to return to '''MODEL SETTINGS'''.

*'''Trainer mode'''
**'''Master'''
***'''Active condition''' sets the conditions (switch) to take over the controls of the "Slave" radio.
**'''Slave'''

<div style="clear:both;"></div>

=== Telemetry ===
[[File:ECOS - Telemetry_1.png|300x300px|right|frameless]]
[[File:ECOS - Telemetry_2.png|300x300px|right|frameless]]
This menu displays the overview of the telemetry data received.

<div style="clear:both;"></div>

== Radio settings ==
=== Radio setup ===
[[File:ECOS - RadioSetup_Date.png|300x300px|right|frameless]]
[[File:ECOS - RadioSetup_Display.png|300x300px|right|frameless]]
[[File:ECOS - RadioSetup_Beep.png|300x300px|right|frameless]]
[[File:ECOS - RadioSetup_Mode.png|300x300px|right|frameless]]

====Date====
Sets the date in the radio.

List through the years, months and days slots using the <code>'''ENTER'''</code> button.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to list through the values of each slot.

Press <code>'''BACK'''</code> button to return to '''RADIO SETUP'''.

====Time====
Sets the time in the radio.

List through the hours, minutes and seconds slots using the <code>'''ENTER'''</code> button.

Use <code>'''UP'''</code> and <code>'''DOWN'''</code> buttons to list through the values of each slot.

Press <code>'''BACK'''</code> button to return to '''RADIO SETUP'''.

==== Display ====

*'''Brightness''' sets the intensity of the display's backlight.
*'''Wake up''' sets the condition for turning the backlight on.
**'''ON''' - the backlight is always ON.
**'''Keys''' - TBD
**'''Ctrl''' - the backlight is turned on by moving the controllers.
**'''Both''' - TBD
**'''OFF''' - the backlight is always OFF.
*'''Duration''' sets the time for how long the backlight stays ON.
*'''Contrast''' sets the background and character colour intensity difference.

==== Buzzer ====
*'''Power on beep''' enables the beep alert when the radio turns ON.
*'''Op prompt''' enables the beep when a key is pressed.
*'''Volt-Threshold''' sets the battery voltage value that triggers the alarm.
*'''Volt-Alarm''' enables the battery voltage alarm.
*'''RSSI-Threshold''' sets the reception signal strength value that triggers the alarm.
*'''RSSI-Alarm''' enables the reception signal strength alarm.

==== Motor ====
*'''Mode''' sets when the haptic feedback is triggered.
**'''Silent''' - vibrations are OFF.
**'''Alarms only''' - vibrates only when alarm is triggered.
**'''Always''' - vibrates with each beep.

====Mode====
Sets the mode of your radio in software. Mechanical adjustments to the gimbals have to be made as required. 

<div style="clear:both;"></div>

=== Hardware ===
[[File:ECOS - Hardware_Check.png|300x300px|right|frameless]]
[[File:ECOS - Hardware_Cali.png|300x300px|right|frameless]]
[[File:ECOS - Hardware_Filter.png|300x300px|right|frameless]]
*'''Hardware Check''' is a user interface indicating the controls of each analogue controller.
*'''Analogs Calibration''' is used to calibrate the neutral and end positions of each analogue controller
*'''Analogs filter''' enables the filter of micromovements of each analogue controller.

<div style="clear:both;"></div>

=== Info ===
[[File:ECOS - Info.png|300x300px|right|frameless]]
User interface displaying the firmware and hardware versions and advanced info.

<div style="clear:both;"></div>

=== Device config ===
[[File:ECOS - DeviceConfig_Sens.png|300x300px|right|frameless]]
[[File:ECOS - DeviceConfig_RX.png|300x300px|right|frameless]]
[[File:ECOS - DeviceConfig_Stabi.png|300x300px|right|frameless]]
This menu contains the options for setting up the telemetry sensors and receivers.

==== Sensors ====
This menu contains the options for setting up the telemetry sensors and their properties, if supported.

==== Receivers ====
This menu contains the options for setting up the receivers and their properties, if supported.

<div style="clear:both;"></div>

== Telemetry ==
[[File:ECOS - Telemetry.png|300x300px|right|frameless]]
A user interface displaying the real-time telemetry data received.

<div style="clear:both;"></div>