KAVAN AP09A - Instruction Manual - Revision history

Mr. KAVAN at 08:10, 29 January 2026

2026-01-29T08:10:34Z

← Older revision		Revision as of 10:10, 29 January 2026
Line 507:		Line 507:
	</translate>		</translate>

	[[Category:Manuals]][[Category:Engines]]		[[Category:Manuals]][[Category:Engines]][[Category:Unfinished]]

Mr. KAVAN at 07:42, 29 January 2026

2026-01-29T07:42:19Z

← Older revision		Revision as of 09:42, 29 January 2026
Line 506:		Line 506:
	* Include a note with your address. It is surprising how often this is forgotten.		* Include a note with your address. It is surprising how often this is forgotten.
	</translate>		</translate>

			[[Category:Manuals]][[Category:Engines]]

Mr. KAVAN at 14:48, 28 January 2026

2026-01-28T14:48:07Z

Show changes

Mr. KAVAN: Mr. KAVAN moved page KAVAN AP09 - Instruction Manual to KAVAN AP09A - Instruction Manual without leaving a redirect

2026-01-28T12:44:28Z

Mr. KAVAN moved page KAVAN AP09 - Instruction Manual to KAVAN AP09A - Instruction Manual without leaving a redirect

← Older revision		Revision as of 14:44, 28 January 2026
(No difference)

Mrs. Kavan: Marked this version for translation

2025-10-24T07:07:00Z

Marked this version for translation

← Older revision		Revision as of 09:07, 24 October 2025
Line 46:		Line 46:
	\|}		\|}

			<!--T:21-->
	==== Dimensions (mm) ====		==== Dimensions (mm) ====
	{\| class="wikitable" style="width: 100%; text-align: center;"		{\| class="wikitable" style="width: 100%; text-align: center;"
Line 269:		Line 270:
	\|-		\|-
	\|}		\|}
	~~<!--T:21-->~~
	=== Safety Notes ===		=== Safety Notes ===
	{{Note\|type=warn\|text='''Important:''' Before attempting to operate your engine, please read through these instructions to familiarize yourself with the operations and features of this technical, fully operational two-stroke engine. The AP09 engine is designed for new and experienced modellers alike. Please read through the entire manual before operating this engine. Pay particular attention to the Safety Instructions and Warnings section of the manual.}}		{{Note\|type=warn\|text='''Important:''' Before attempting to operate your engine, please read through these instructions to familiarize yourself with the operations and features of this technical, fully operational two-stroke engine. The AP09 engine is designed for new and experienced modellers alike. Please read through the entire manual before operating this engine. Pay particular attention to the Safety Instructions and Warnings section of the manual.}}

Mrs. Kavan at 07:06, 24 October 2025

2025-10-24T07:06:52Z

← Older revision		Revision as of 09:06, 24 October 2025
Line 433:		Line 433:
	\|-		\|-
	\|09238(09218+09219)+09108		\|09238(09218+09219)+09108
	\|Prop Drive, 2x Washer, Nut		\|Prop Drive, 2× Washer, Nut
	\|-		\|-
	\|09601(09604+09606+12114)		\|09601(09604+09606+12114)
Line 445:		Line 445:
	\|-		\|-
	\|12110+12109		\|12110+12109
	\|Bearing set (front / rear)		\|Bearing set (front/rear)
	\|-		\|-
	\|09203		\|09203
Line 463:		Line 463:
	\|-		\|-
	\|09123B(4)		\|09123B(4)
	\|Engine Bolt set(4pcs)		\|Engine Bolt set (4pcs)
	\|}		\|}

Mrs. Kavan at 06:53, 24 October 2025

2025-10-24T06:53:01Z

← Older revision		Revision as of 08:53, 24 October 2025
Line 399:		Line 399:
	<!--T:84-->		<!--T:84-->
	{{Note\|type=info\|text='''Note:''' The engine speed will increase by about 10–30% during flight. This is because the engine is moving and more air is being sucked into the carburettor at a higher pressure, which enriches the mixture. In addition, as the fuel level in the tank drops, it becomes more difficult for the engine to draw fuel, especially during aerobatics, which further enriches the mixture. It is therefore necessary to set the mixture slightly richer on the ground to compensate for this leaning of the mixture in flight. Always monitor the exhaust gases during flight. The engine must always leave a visible trail of white smoke. If you do not see smoke, the mixture is too lean. You should land immediately and set a richer mixture.)}}		{{Note\|type=info\|text='''Note:''' The engine speed will increase by about 10–30% during flight. This is because the engine is moving and more air is being sucked into the carburettor at a higher pressure, which enriches the mixture. In addition, as the fuel level in the tank drops, it becomes more difficult for the engine to draw fuel, especially during aerobatics, which further enriches the mixture. It is therefore necessary to set the mixture slightly richer on the ground to compensate for this leaning of the mixture in flight. Always monitor the exhaust gases during flight. The engine must always leave a visible trail of white smoke. If you do not see smoke, the mixture is too lean. You should land immediately and set a richer mixture.)}}
	=== ~~LUBRICATION~~ ===		=== Lubrication ===
	When the engine is properly set, the fuel provides plenty of lubrication while the engine is running. After the last run of the day, the engine should be run dry of fuel and an after run engine oil should be applied to the engine‘s internal parts through the carburettor and glow plug openings. This will protect the engine‘s moving parts from rust and other deterioration.		When the engine is properly set, the fuel provides plenty of lubrication while the engine is running. After the last run of the day, the engine should be run dry of fuel and an after run engine oil should be applied to the engine‘s internal parts through the carburettor and glow plug openings. This will protect the engine‘s moving parts from rust and other deterioration.

Mrs. Kavan at 06:50, 24 October 2025

2025-10-24T06:50:05Z

← Older revision		Revision as of 08:50, 24 October 2025
Line 379:		Line 379:

	<!--T:76-->		<!--T:76-->
	{{Note\|type=warn\|text='''~~WARNING~~:''' Do not run the engine with a mixture that is too lean, and always allow it to cool down after flight. This will prevent premature wear or damage to the piston and sleeve.}}		{{Note\|type=warn\|text='''Warning:''' Do not run the engine with a mixture that is too lean, and always allow it to cool down after flight. This will prevent premature wear or damage to the piston and sleeve.}}

	<!--T:77-->		<!--T:77-->
	=== ~~SETTING THE FUEL MIXTURE RATIO~~ ===		=== Setting the Fuel Mixture Ratio ===
	Now that the engine is fully broken in, you can adjust the needle valve to achieve optimum performance.		Now that the engine is fully broken in, you can adjust the needle valve to achieve optimum performance.

Line 403:		Line 403:

	<!--T:85-->		<!--T:85-->
	=== ~~CARE AND MAINTENANCE~~ ===		=== Care and Maintenance ===
	To ensure that you obtain long life and peak performance from your engine, observe the following:		To ensure that you obtain long life and peak performance from your engine, observe the following:
	# Avoid running the engine under dusty conditions.		# Avoid running the engine under dusty conditions.
Line 414:		Line 414:

	<!--T:93-->		<!--T:93-->
	=== ~~SPARE PARTS LIST~~ ===		=== Spare Parts List ===
	To order replacement parts, visit your nearest KAVAN Europe s.r.o. dealer.		To order replacement parts, visit your nearest KAVAN Europe s.r.o. dealer.

Line 420:		Line 420:
	Spare parts are supplied in the sets listed below.		Spare parts are supplied in the sets listed below.
	{\| class="wikitable" style="width: 100%; text-align: left;"		{\| class="wikitable" style="width: 100%; text-align: left;"
	\|'''~~PART~~ #'''		\|'''Part #'''
	\|'''~~DESCRIPTION~~'''		\|'''Description'''
	\|-		\|-
	\|09102+09101		\|09102+09101

Mrs. Kavan at 06:44, 24 October 2025

2025-10-24T06:44:40Z

Show changes

Mrs. Kavan at 09:40, 20 October 2025

2025-10-20T09:40:11Z

Show changes