KAVAN C100 Duo - Instruction manual - Revision history

Mr. KAVAN at 07:41, 29 January 2026

2026-01-29T07:41:43Z

← Older revision		Revision as of 09:41, 29 January 2026
Line 275:		Line 275:
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of anything other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of anything other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
	</translate>		</translate>

			[[Category:Manuals]][[Category:Chargers]]

Mrs. Kavan at 13:34, 7 November 2025

2025-11-07T13:34:58Z

← Older revision		Revision as of 15:34, 7 November 2025
Line 209:		Line 209:
	two channel batteries with the same parameters at the same time.		two channel batteries with the same parameters at the same time.
	Connect the charger with the power supply and power on; select		Connect the charger with the power supply and power on; select
	this setting on the advanced setting menu to set the task parameters. (Note: Both batteries have to be connected to the CH1 and CH2		this setting on the advanced setting menu to set the task parameters. {{Note\|type=info\|'''Note:''' Both batteries have to be connected to the CH1 and CH2 outputs before you try to launch the DualTask mode.}}
	outputs before you try to launch the DualTask mode.)
	==== Parallel task ====		==== Parallel task ====
	[[File:C100_-_Parallel.png\|right\|frameless\|500x500px]]		[[File:C100_-_Parallel.png\|right\|frameless\|500x500px]]

Mrs. Kavan: Marked this version for translation

2025-11-07T12:27:59Z

Marked this version for translation

← Older revision		Revision as of 14:27, 7 November 2025
Line 1:		Line 1:
	<languages/>		<languages/>
	<translate>		<translate>
			<!--T:1-->
	===Introduction===		===Introduction===
	Congratulations on purchasing the '''KAVAN C100 Duo''' dual-channel AC/DC balance charger/discharger. This unit is simple to use; however, the proper operation of this charger, as well as the correct usage of your batteries, requires some knowledge on the part of the user. Therefore, it is important to read right through the '''Operating instructions''' and '''Warning and safety notes''' before you attempt to use your new charger for the first time. We hope you have many years of pleasure and success with your new battery charger.		Congratulations on purchasing the '''KAVAN C100 Duo''' dual-channel AC/DC balance charger/discharger. This unit is simple to use; however, the proper operation of this charger, as well as the correct usage of your batteries, requires some knowledge on the part of the user. Therefore, it is important to read right through the '''Operating instructions''' and '''Warning and safety notes''' before you attempt to use your new charger for the first time. We hope you have many years of pleasure and success with your new battery charger.

			<!--T:2-->
	=== Charger set contents ===		=== Charger set contents ===
	# KAVAN C100 Duo charger		# KAVAN C100 Duo charger
	# Instruction manual		# Instruction manual

	=== Warnings and safety notes ===		=== Warnings and safety notes === <!--T:3-->

			<!--T:4-->
	* For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.		* For your safety and a better user experience, please read this manual and follow the instruction before using the new charger.
	* This is not a toy. This appliance is not intended for use by young children under 14 years of age or uninformed persons unless they were adequately supervised by a responsible adult person to en sure that they can use the appliance safely.		* This is not a toy. This appliance is not intended for use by young children under 14 years of age or uninformed persons unless they were adequately supervised by a responsible adult person to en sure that they can use the appliance safely.
Line 21:		Line 24:
	* This unit may emit heat during use.		* This unit may emit heat during use.

			<!--T:5-->
	=== Specification ===		=== Specification ===
	{\| class="wikitable" style="text-align: center; width: 100%;"		{\| class="wikitable" style="text-align: center; width: 100%;"
Line 65:		Line 69:
	\|}		\|}

			<!--T:6-->
	=== Charger layout ===		=== Charger layout ===
	[[File:C100_-_Overview.png\|right\|frameless\|1000x750px]]		[[File:C100_-_Overview.png\|right\|frameless\|1000x750px]]
Line 70:		Line 75:
	'''CH1 Menu button:''' Short press to enter the CH1 detailed parameter interface, long press to enter the CH1 task setting menu.		'''CH1 Menu button:''' Short press to enter the CH1 detailed parameter interface, long press to enter the CH1 task setting menu.

			<!--T:7-->
	'''CH2 Menu button:''' Short press to enter the CH2 detailed parameter interface, long press to enter the CH2 task setting menu.		'''CH2 Menu button:''' Short press to enter the CH2 detailed parameter interface, long press to enter the CH2 task setting menu.

			<!--T:8-->
	'''Long press the CH1 and CH2 Menu buttons at the same time:''' Enter the advanced settings menu.		'''Long press the CH1 and CH2 Menu buttons at the same time:''' Enter the advanced settings menu.

			<!--T:9-->
	==== Preset battery type of charger and task parameters ====		==== Preset battery type of charger and task parameters ====
	{\| class="wikitable" style="width: 100%; text-align: center;"		{\| class="wikitable" style="width: 100%; text-align: center;"
Line 147:		Line 155:
	\|}		\|}

			<!--T:10-->
	==== How to confirm charging current ====		==== How to confirm charging current ====
	Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage your battery, which will result in overheat even explosion during the charging process. The charging and discharging rate of battery is usually marked with C value. Multiplying the charging C value and battery capacity equals to the maximum charging current supported by the battery. For example, for a 1000mAh battery with a charging rate of 5C, the maximum charging current would be 1000×5=5000 mA; therefore, the maximum charging current is 5 A. For a lithium battery, if it is impossible to confirm the supported charging C value, please set the charging current below 1C, for the sake of its (lithium battery) safety. The reference relation between C value and charging time: charging time ≥60 minutes/ charging C value (e.g. it needs around 60–70 minutes to complete charging with 1C). Due to differences in battery conversion efficiency, the time to complete the charging might be extended.		Make sure to know the maximum charging current of the battery before charging, never use excessive current to charge to damage your battery, which will result in overheat even explosion during the charging process. The charging and discharging rate of battery is usually marked with C value. Multiplying the charging C value and battery capacity equals to the maximum charging current supported by the battery. For example, for a 1000mAh battery with a charging rate of 5C, the maximum charging current would be 1000×5=5000 mA; therefore, the maximum charging current is 5 A. For a lithium battery, if it is impossible to confirm the supported charging C value, please set the charging current below 1C, for the sake of its (lithium battery) safety. The reference relation between C value and charging time: charging time ≥60 minutes/ charging C value (e.g. it needs around 60–70 minutes to complete charging with 1C). Due to differences in battery conversion efficiency, the time to complete the charging might be extended.

			<!--T:11-->
	=== Operating the charger ===		=== Operating the charger ===
	Power on your C100 Duo charger connecting to the AC mains socket or car battery/stabilized power supply, connect the battery, and long press the menu button of the desired channel to enter the task setting menu as follows:		Power on your C100 Duo charger connecting to the AC mains socket or car battery/stabilized power supply, connect the battery, and long press the menu button of the desired channel to enter the task setting menu as follows:
Line 169:		Line 179:
	\|}		\|}

			<!--T:12-->
	==== Charge ====		==== Charge ====
	Balancing port is strongly recommended when charging LiPo battery, which can make sure to monitor voltage on each cell battery and balance it when charging. Warning beeper will yell before start charging LiPo if in non-balance mode (no connecting with balance port).		Balancing port is strongly recommended when charging LiPo battery, which can make sure to monitor voltage on each cell battery and balance it when charging. Warning beeper will yell before start charging LiPo if in non-balance mode (no connecting with balance port).

			<!--T:13-->
	Current setting range: 0.2–20.0 A		Current setting range: 0.2–20.0 A
	[[File:C100_-_Dual.png\|right\|frameless\|500x500px]]		[[File:C100_-_Dual.png\|right\|frameless\|500x500px]]
Line 177:		Line 189:
	Current setting range: 0.2–1.5 A		Current setting range: 0.2–1.5 A

			<!--T:14-->
	==== Destroy ====		==== Destroy ====
	Connect the battery to be scrapped, and select the scrap function in task options, which capable to discharge the battery to 0V.		Connect the battery to be scrapped, and select the scrap function in task options, which capable to discharge the battery to 0V.

			<!--T:15-->
	==== Storage ====		==== Storage ====
	Current setting range: 0.2–20.0 A		Current setting range: 0.2–20.0 A

			<!--T:16-->
	==== Starting/stopping the task ====		==== Starting/stopping the task ====
	Once satisfied with your settings select “Start” and press the Menu button of the respective channel to start the task.		Once satisfied with your settings select “Start” and press the Menu button of the respective channel to start the task.
	You can stop the task in progress anytime; long press the Menu button of the respective channel and then select “Stop” and press the Menu button.		You can stop the task in progress anytime; long press the Menu button of the respective channel and then select “Stop” and press the Menu button.

			<!--T:17-->
	=== Advanced settings ===		=== Advanced settings ===
	Under the standby interface, long press the CH1 and CH2 button at the same time to enter the advanced setting menu.		Under the standby interface, long press the CH1 and CH2 button at the same time to enter the advanced setting menu.
Line 242:		Line 258:
	Hardware/firmware version information.		Hardware/firmware version information.

			<!--T:18-->
	=== BattAir ===		=== BattAir ===
	{{Note\|type=reminder\|'''Note:''' Only for '''C100 Duo Air''' }}		{{Note\|type=reminder\|'''Note:''' Only for '''C100 Duo Air''' }}

Mrs. Kavan at 12:17, 7 November 2025

2025-11-07T12:17:46Z

← Older revision		Revision as of 14:17, 7 November 2025
Line 1:		Line 1:
			<languages/>
			<translate>
	===Introduction===		===Introduction===
	Congratulations on purchasing the '''KAVAN C100 Duo''' dual-channel AC/DC balance charger/discharger. This unit is simple to use; however, the proper operation of this charger, as well as the correct usage of your batteries, requires some knowledge on the part of the user. Therefore, it is important to read right through the '''Operating instructions''' and '''Warning and safety notes''' before you attempt to use your new charger for the first time. We hope you have many years of pleasure and success with your new battery charger.		Congratulations on purchasing the '''KAVAN C100 Duo''' dual-channel AC/DC balance charger/discharger. This unit is simple to use; however, the proper operation of this charger, as well as the correct usage of your batteries, requires some knowledge on the part of the user. Therefore, it is important to read right through the '''Operating instructions''' and '''Warning and safety notes''' before you attempt to use your new charger for the first time. We hope you have many years of pleasure and success with your new battery charger.
Line 256:		Line 258:
	=== Guarantee ===		=== Guarantee ===
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of anything other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of anything other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
			</translate>

Mrs. Kavan at 10:58, 7 November 2025

2025-11-07T10:58:23Z

← Older revision		Revision as of 12:58, 7 November 2025
Line 171:		Line 171:

	Current setting range: 0.2–20.0 A		Current setting range: 0.2–20.0 A
	[[File:C100_-_Dual.png\|right\|frameless\|~~600x600px~~]]		[[File:C100_-_Dual.png\|right\|frameless\|500x500px]]
	==== Discharge ====		==== Discharge ====
	Current setting range: 0.2–1.5 A		Current setting range: 0.2–1.5 A
Line 194:		Line 194:
	outputs before you try to launch the DualTask mode.)		outputs before you try to launch the DualTask mode.)
	==== Parallel task ====		==== Parallel task ====
	[[File:C100_-_Parallel.png\|right\|frameless\|~~600x600px~~]]		[[File:C100_-_Parallel.png\|right\|frameless\|500x500px]]
	Select this setting; it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger‘s balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.		Select this setting; it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger‘s balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.
	==== DC power CH1 ====		==== DC power CH1 ====

Mrs. Kavan: /* Advanced settings */

2025-11-07T10:55:49Z

Advanced settings

← Older revision		Revision as of 12:55, 7 November 2025
Line 194:		Line 194:
	outputs before you try to launch the DualTask mode.)		outputs before you try to launch the DualTask mode.)
	==== Parallel task ====		==== Parallel task ====
			[[File:C100_-_Parallel.png\|right\|frameless\|600x600px]]
	Select this setting; it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger‘s balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.		Select this setting; it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger‘s balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.
	~~[[File:C100_-_Parallel.png\|right\|frameless\|600x600px]]~~
	==== DC power CH1 ====		==== DC power CH1 ====
	The charger CH1 is equivalent to a DC power supply when selecting this function, with output voltage adjustable from 2 to 30V, and current adjustable from 1.0 to 5.0A.		The charger CH1 is equivalent to a DC power supply when selecting this function, with output voltage adjustable from 2 to 30V, and current adjustable from 1.0 to 5.0A.
Line 239:		Line 239:
	===== System info =====		===== System info =====
	Hardware/firmware version information.		Hardware/firmware version information.

	=== BattAir ===		=== BattAir ===
	{{Note\|type=reminder\|'''Note:''' Only for '''C100 Duo Air''' }}		{{Note\|type=reminder\|'''Note:''' Only for '''C100 Duo Air''' }}

Mrs. Kavan at 10:54, 7 November 2025

2025-11-07T10:54:48Z

← Older revision		Revision as of 12:54, 7 November 2025
Line 171:		Line 171:

	Current setting range: 0.2–20.0 A		Current setting range: 0.2–20.0 A
			[[File:C100_-_Dual.png\|right\|frameless\|600x600px]]
	==== Discharge ====		==== Discharge ====
	Current setting range: 0.2–1.5 A		Current setting range: 0.2–1.5 A

	Destroy ~~connect~~ the battery to be scrapped, and select the scrap function in task options, which capable to discharge the battery to 0V.		==== Destroy ====
			Connect the battery to be scrapped, and select the scrap function in task options, which capable to discharge the battery to 0V.

	==== Storage ====		==== Storage ====
Line 194:		Line 195:
	==== Parallel task ====		==== Parallel task ====
	Select this setting; it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger‘s balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.		Select this setting; it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger‘s balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.
			[[File:C100_-_Parallel.png\|right\|frameless\|600x600px]]
	==== DC power CH1 ====		==== DC power CH1 ====
	The charger CH1 is equivalent to a DC power supply when selecting this function, with output voltage adjustable from 2 to 30V, and current adjustable from 1.0 to 5.0A.		The charger CH1 is equivalent to a DC power supply when selecting this function, with output voltage adjustable from 2 to 30V, and current adjustable from 1.0 to 5.0A.

Mrs. Kavan at 10:47, 7 November 2025

2025-11-07T10:47:49Z

← Older revision		Revision as of 12:47, 7 November 2025
Line 64:		Line 64:

	=== Charger layout ===		=== Charger layout ===
	[[File:C100_-_Overview.png\|right\|frameless\|~~600x600px~~]]		[[File:C100_-_Overview.png\|right\|frameless\|1000x750px]]
	=== Key operation instructions (under standby interface after powering on) ===		=== Key operation instructions (under standby interface after powering on) ===
	'''CH1 Menu button:''' Short press to enter the CH1 detailed parameter interface, long press to enter the CH1 task setting menu.		'''CH1 Menu button:''' Short press to enter the CH1 detailed parameter interface, long press to enter the CH1 task setting menu.

Mrs. Kavan at 10:46, 7 November 2025

2025-11-07T10:46:43Z

← Older revision		Revision as of 12:46, 7 November 2025
Line 64:		Line 64:

	=== Charger layout ===		=== Charger layout ===
			[[File:C100_-_Overview.png\|right\|frameless\|600x600px]]
	=== Key operation instructions (under standby interface after powering on) ===		=== Key operation instructions (under standby interface after powering on) ===
	'''CH1 Menu button:''' Short press to enter the CH1 detailed parameter interface, long press to enter the CH1 task setting menu.		'''CH1 Menu button:''' Short press to enter the CH1 detailed parameter interface, long press to enter the CH1 task setting menu.

Mrs. Kavan at 10:30, 7 November 2025

2025-11-07T10:30:14Z

@@ Line 3: / Line 3: @@
 === Charger set contents ===
-KAVAN C100 Duo charger, instruction manual
+# KAVAN C100 Duo charger
 === Warnings and safety notes ===
@@ Line 20: / Line 21: @@
 === Specification ===
 {| class="wikitable" style="text-align: center; width: 100%;"
 |'''AC input voltage'''
 |100–240 V/50–60 Hz
 |-
 | rowspan="3" |'''Battery types/cells'''
@@ Line 39: / Line 40: @@
 |2× 0.2–20 A max. 500 W (normal mode)
 |-
-|1× 0.1–35A max. 800 W (parallel mode)
+|1× 0.1–30 A max. 750 W (parallel mode)
 |-
 | rowspan="2" |'''Discharging power'''
-|2× 0.2–1.5A max. 15 W (normal mode)
+|2× 0.2–1.5 A max. 15 W (normal mode)
 |-
-|1× 0.2–3.5 max. 30 W (parallel mode)
+|1× 0.2–3.0 A max. 30 W (parallel mode)
 |-
 |'''Balance current'''
@@ Line 53: / Line 54: @@
 |-
 |'''USB-C'''
-|Upgrade USB3.0/Charge USB-C 5.0 V/2.0 A
+|Upgrade USB2.0/USBC PD 30W
 |-
 |'''Dimension'''
-|142×135×64 mm
+|135x135x64 mm
 |-
 |'''Weight'''
@@ Line 64: / Line 65: @@
 === Charger layout ===
-=== Button operation instructions (under standby interface after powering on) ===
+=== Key operation instructions (under standby interface after powering on) ===
 '''CH1 Menu button:''' Short press to enter the CH1 detailed parameter interface, long press to enter the CH1 task setting menu.
@@ Line 182: / Line 183: @@
 Once satisfied with your settings select “Start” and press the Menu button of the respective channel to start the task.
 You can stop the task in progress anytime; long press the Menu button of the respective channel and then select “Stop” and press the Menu button.