KAVAN MicroVario - Instruction manual - Revision history

Mrs. Kavan at 09:00, 20 August 2025

2025-08-20T09:00:17Z

← Older revision		Revision as of 11:00, 20 August 2025
Line 26:		Line 26:
	* '''Operating temperature:''' (-)20–85°C		* '''Operating temperature:''' (-)20–85°C
	* '''Supply voltage:''' 3.5–12 V		* '''Supply voltage:''' 3.5–12 V
	* '''Telemetry:''' (-20)–85 °C
	* '''Supply Voltage:''' 3.5–8.4 V
	* '''Telemetry:''' Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2		* '''Telemetry:''' Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2
	* '''Status LED:''' Yes		* '''Status LED:''' Yes

Mrs. Kavan: Marked this version for translation

2025-08-20T07:04:20Z

Marked this version for translation

← Older revision		Revision as of 09:04, 20 August 2025
Line 1:		Line 1:
	<languages/>		<languages/>
	<translate>		<translate>
			<!--T:1-->
	=== Introduction ===		=== Introduction ===
	MicroVario is a sensitive altimeter/variometer which uses the latest MEMS technology to achieve a high level of accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric pressure to indicate the climb/sink rate.		MicroVario is a sensitive altimeter/variometer which uses the latest MEMS technology to achieve a high level of accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric pressure to indicate the climb/sink rate.

	=== Features ===		=== Features === <!--T:2-->

			<!--T:3-->
	* Tiny dimensions. The sensor is connected directly to the receiver telemetry port.		* Tiny dimensions. The sensor is connected directly to the receiver telemetry port.
	* Accurate measurement of absolute/relative altitude and climb/sink rate.		* Accurate measurement of absolute/relative altitude and climb/sink rate.
Line 13:		Line 15:
	* Firmware updates.		* Firmware updates.

	=== specifications ===		=== specifications === <!--T:4-->

			<!--T:5-->
	* '''Dimensions:''' 15×9×4 mm		* '''Dimensions:''' 15×9×4 mm
	* '''Weight:''' 2 g		* '''Weight:''' 2 g
Line 28:		Line 31:
	* '''Status LED:''' Yes		* '''Status LED:''' Yes

			<!--T:6-->
	=== Installation ===		=== Installation ===
	Connect the MicroVario directly to the receiver telemetry port. Please note that the sensor is very sensitive to changes in atmospheric pressure and also to mechanical stress. To reach the most accurate altitude measurements please pay attention to the receiver placement. Try to avoid any mechanical stress on the sensor. The MicroVario should not be directly exposed to the airflow and any close contact with components producing heat (such as engines or speed controllers) should be avoided.		Connect the MicroVario directly to the receiver telemetry port. Please note that the sensor is very sensitive to changes in atmospheric pressure and also to mechanical stress. To reach the most accurate altitude measurements please pay attention to the receiver placement. Try to avoid any mechanical stress on the sensor. The MicroVario should not be directly exposed to the airflow and any close contact with components producing heat (such as engines or speed controllers) should be avoided.

			<!--T:7-->
	=== Telemetry and settings ===		=== Telemetry and settings ===
	The device is compatible with JETIBOX and you can use it for programming. (Older versions of the JETIBOX manufactured before 2015 might be unable to communicate with the Micro Vario; once connected, the “Communication error” message appears.)		The device is compatible with JETIBOX and you can use it for programming. (Older versions of the JETIBOX manufactured before 2015 might be unable to communicate with the Micro Vario; once connected, the “Communication error” message appears.)

			<!--T:8-->
	The JETIBOX menu is divided into three sections:		The JETIBOX menu is divided into three sections:

			<!--T:9-->
	* '''Actual values''' - Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.		* '''Actual values''' - Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.
	** '''Reset Min/Max''' - Press left+right buttons together to reset all minimums and maximums.		** '''Reset Min/Max''' - Press left+right buttons together to reset all minimums and maximums.
Line 49:		Line 56:
	* '''Service''' - In this menu you can view the device version and reset it to the default factory configuration.		* '''Service''' - In this menu you can view the device version and reset it to the default factory configuration.

			<!--T:10-->
	'''*)''' The alarm setting is compatible with Duplex and Hott systems.		'''*)''' The alarm setting is compatible with Duplex and Hott systems.

			<!--T:11-->
	=== JETIBOX Connection ===		=== JETIBOX Connection ===
	Plug the MicroVario into the sensor slot of the JETIBOX. Power it up with a battery with appropriate voltage (4.5–8.4V). Now you can configure the sensor using the arrows on the JETIBOX.		Plug the MicroVario into the sensor slot of the JETIBOX. Power it up with a battery with appropriate voltage (4.5–8.4V). Now you can configure the sensor using the arrows on the JETIBOX.

	==== Complete menu structure ====		==== Complete menu structure ==== <!--T:12-->

			<!--T:13-->
	==== Graupner hott menu structure ====		==== Graupner hott menu structure ====
	MicroVario offers telemetry as a standard VARIO telemetry module.		MicroVario offers telemetry as a standard VARIO telemetry module.

			<!--T:14-->
	==== Futaba and Multiplex connection ====		==== Futaba and Multiplex connection ====
	Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is possible with the following fixed sensor slots:		Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is possible with the following fixed sensor slots:
Line 80:		Line 91:
	\|}		\|}

	=== Safety information ===		=== Safety information === <!--T:15-->

			<!--T:16-->
	* Operate the MicroVario always in dry environment and within the device limits stated in this guide. Never expose the device to excessive heat or cold.		* Operate the MicroVario always in dry environment and within the device limits stated in this guide. Never expose the device to excessive heat or cold.
	* Never apply mechanical stress or excessive force to the MicroVario. The sensing element can be damaged or measure imprecisely if the force is applied.		* Never apply mechanical stress or excessive force to the MicroVario. The sensing element can be damaged or measure imprecisely if the force is applied.
Line 87:		Line 99:
	* Always check the polarity of the connection. Never inverse the polarity – this could lead to total destruction.		* Always check the polarity of the connection. Never inverse the polarity – this could lead to total destruction.

			<!--T:17-->
	==== Manufacturer ====		==== Manufacturer ====
	KAVAN MicroVario is made in Czechia by '''MAV Sense s.r.o.''' E-mail: info@mavsense.com \| Web: [https://www.mavsense.com/ www.mavsense.com]		KAVAN MicroVario is made in Czechia by '''MAV Sense s.r.o.''' E-mail: info@mavsense.com \| Web: [https://www.mavsense.com/ www.mavsense.com]

			<!--T:18-->
	=== Recycling and waste disposal note (European Union) ===		=== Recycling and waste disposal note (European Union) ===
	[[File:WEEE.svg\|right\|frameless\|50x50px]]		[[File:WEEE.svg\|right\|frameless\|50x50px]]
	Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.		Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.

			<!--T:19-->
	=== EU declaration of conformity (European Union) ===		=== EU declaration of conformity (European Union) ===
	[[File:CE.svg\|right\|frameless\|50x50px]]		[[File:CE.svg\|right\|frameless\|50x50px]]
	Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN MicroVario''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at [http://www.kavanrc.com/doc www.kavanrc.com/doc].		Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN MicroVario''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at [http://www.kavanrc.com/doc www.kavanrc.com/doc].

			<!--T:20-->
	=== Guarantee ===		=== Guarantee ===
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
	</translate>		</translate>

Mrs. Kavan at 07:04, 20 August 2025

2025-08-20T07:04:04Z

← Older revision		Revision as of 09:04, 20 August 2025
Line 1:		Line 1:
			<languages/>
			<translate>
	=== Introduction ===		=== Introduction ===
	MicroVario is a sensitive altimeter/variometer which uses the latest MEMS technology to achieve a high level of accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric pressure to indicate the climb/sink rate.		MicroVario is a sensitive altimeter/variometer which uses the latest MEMS technology to achieve a high level of accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric pressure to indicate the climb/sink rate.
Line 4:		Line 6:
	=== Features ===		=== Features ===

	* ~~Small~~ dimensions. The sensor is connected directly to the receiver telemetry port.		* Tiny dimensions. The sensor is connected directly to the receiver telemetry port.
	* Accurate measurement of absolute/relative altitude and climb/sink rate.		* Accurate measurement of absolute/relative altitude and climb/sink rate.
	* Automatic telemetry detection: Duplex EX, Hott, MSB, S.~~Bus2~~.		* Automatic telemetry detection: Duplex EX, Hott, MSB, S.BUS2.
	* Configurable alarms on altitude and climb rate.		* Configurable alarms on altitude and climb rate.
	* Configuration through the transmitter.		* Configuration through the transmitter.
	* Firmware updates.		* Firmware updates.

	=== ~~Technical~~ specifications ===		=== specifications ===

	* '''Dimensions:''' ~~21,5×10×4~~ mm		* '''Dimensions:''' 15×9×4 mm
	* '''Weight:''' 1 g		* '''Weight:''' 2 g
	* '''Pressure range:''' 300÷1200hPa		* '''Pressure range:''' 300÷1200hPa
	* '''Altitude resolution:''' 0.1 m		* '''Altitude resolution:''' 0.1 m
Line 30:		Line 32:

	=== Telemetry and settings ===		=== Telemetry and settings ===
	The device is compatible with JETIBOX for programming. The JETIBOX menu is divided into three sections:		The device is compatible with JETIBOX and you can use it for programming. (Older versions of the JETIBOX manufactured before 2015 might be unable to communicate with the Micro Vario; once connected, the “Communication error” message appears.)

			The JETIBOX menu is divided into three sections:

	* '''Actual values''' - Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.		* '''Actual values''' - Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.
	** '''Reset Min/Max''' - Press left+right buttons together to reset all minimums and maximums.		** '''Reset Min/Max''' - Press left+right buttons together to reset all minimums and maximums.
	* '''Settings''' - Basic settings of the sensor.		* '''Settings''' - Basic settings of the sensor
	** '''Language''' - You can choose the language of the JETIBOX screen.		** '''Language''' - You can choose the language of the JETIBOX screen.
	** '''Vario sensitivity''' - Sets the amount of filtering for the pressure sensor data. By increasing the sensitivity you will get faster response to altitude changes. Please note that the indicated noise may be increased as well. (Default value: Medium)		** '''Vario sensitivity''' - Sets the amount of filtering for the pressure sensor data. By increasing the sensitivity you will get faster response to altitude changes. Please note that the indicated noise may be increased as well. (Default value: Medium)
Line 47:		Line 51:
	'''*)''' The alarm setting is compatible with Duplex and Hott systems.		'''*)''' The alarm setting is compatible with Duplex and Hott systems.

	==== JETIBOX Connection ====		=== JETIBOX Connection ===
	Plug the MicroVario into the sensor slot of the JETIBOX. Power it up with a battery with appropriate voltage (4.5–8.4V). Now you can configure the sensor using the arrows on the JETIBOX.		Plug the MicroVario into the sensor slot of the JETIBOX. Power it up with a battery with appropriate voltage (4.5–8.4V). Now you can configure the sensor using the arrows on the JETIBOX.

Line 84:		Line 88:

	==== Manufacturer ====		==== Manufacturer ====
	KAVAN MicroVario is made in Czechia by '''MAV Sense s.r.o.'''~~<!--T:38-->~~E-mail: info@mavsense.com \| Web: [https://www.mavsense.com/ www.mavsense.com]		KAVAN MicroVario is made in Czechia by '''MAV Sense s.r.o.''' E-mail: info@mavsense.com \| Web: [https://www.mavsense.com/ www.mavsense.com]

	=== Recycling and waste disposal note (European Union) ===		=== Recycling and waste disposal note (European Union) ===
Line 96:		Line 100:
	=== Guarantee ===		=== Guarantee ===
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
			</translate>

Mr. KAVAN: /* Futaba and Multiplex connection */

2025-08-20T06:42:44Z

Futaba and Multiplex connection

← Older revision		Revision as of 08:42, 20 August 2025
Line 57:		Line 57:
	==== Futaba and Multiplex connection ====		==== Futaba and Multiplex connection ====
	Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is possible with the following fixed sensor slots:		Futaba and Multiplex systems do not offer wireless device configuration. The telemetry transmission is possible with the following fixed sensor slots:
	{\| class="wikitable"		{\| class="wikitable" style="text-align: center; width: 100%;"
	\|+		\|+
	!		!

Mrs. Kavan: /* Complete menu structure: */

2024-10-17T06:43:29Z

Complete menu structure:

← Older revision		Revision as of 08:43, 17 October 2024
Line 50:		Line 50:
	Plug the MicroVario into the sensor slot of the JETIBOX. Power it up with a battery with appropriate voltage (4.5–8.4V). Now you can configure the sensor using the arrows on the JETIBOX.		Plug the MicroVario into the sensor slot of the JETIBOX. Power it up with a battery with appropriate voltage (4.5–8.4V). Now you can configure the sensor using the arrows on the JETIBOX.

	==== Complete menu structure: ====		==== Complete menu structure ====

	==== Graupner hott menu structure: ====		==== Graupner hott menu structure ====
	MicroVario offers telemetry as a standard VARIO telemetry module.		MicroVario offers telemetry as a standard VARIO telemetry module.

Line 82:		Line 82:
	* Do not remove the heat shrink tube from the device and do not try to implement any changes or modifications. This can lead to a total destruction and to the denial of any warranty claims.		* Do not remove the heat shrink tube from the device and do not try to implement any changes or modifications. This can lead to a total destruction and to the denial of any warranty claims.
	* Always check the polarity of the connection. Never inverse the polarity – this could lead to total destruction.		* Always check the polarity of the connection. Never inverse the polarity – this could lead to total destruction.

			==== Manufacturer ====
			KAVAN MicroVario is made in Czechia by '''MAV Sense s.r.o.'''<!--T:38-->E-mail: info@mavsense.com \| Web: [https://www.mavsense.com/ www.mavsense.com]

	=== Recycling and waste disposal note (European Union) ===		=== Recycling and waste disposal note (European Union) ===

Mrs. Kavan at 06:42, 17 October 2024

2024-10-17T06:42:26Z

← Older revision		Revision as of 08:42, 17 October 2024
Line 82:		Line 82:
	* Do not remove the heat shrink tube from the device and do not try to implement any changes or modifications. This can lead to a total destruction and to the denial of any warranty claims.		* Do not remove the heat shrink tube from the device and do not try to implement any changes or modifications. This can lead to a total destruction and to the denial of any warranty claims.
	* Always check the polarity of the connection. Never inverse the polarity – this could lead to total destruction.		* Always check the polarity of the connection. Never inverse the polarity – this could lead to total destruction.

			=== Recycling and waste disposal note (European Union) ===
			[[File:WEEE.svg\|right\|frameless\|50x50px]]
			Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.

			=== EU declaration of conformity (European Union) ===
			[[File:CE.svg\|right\|frameless\|50x50px]]
			Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN MicroVario''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at [http://www.kavanrc.com/doc www.kavanrc.com/doc].

			=== Guarantee ===
			The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.

Mrs. Kavan: /* Futaba and Multiplex connection */

2024-10-17T06:41:22Z

Futaba and Multiplex connection

← Older revision		Revision as of 08:41, 17 October 2024
Line 72:		Line 72:
	\|-		\|-
	\|'''Note'''		\|'''Note'''
	\|Manual detection in the menu Linkage – Sensor. Choose F1672 vario on slot 18.		\|Manual detection in the menu Linkage – Sensor. Choose F1672 vario on slot '''18'''.
	\|Automatically detected by the transmitter.		\|Automatically detected by the transmitter.
	\|}		\|}

			=== Safety information ===

			* Operate the MicroVario always in dry environment and within the device limits stated in this guide. Never expose the device to excessive heat or cold.
			* Never apply mechanical stress or excessive force to the MicroVario. The sensing element can be damaged or measure imprecisely if the force is applied.
			* Do not remove the heat shrink tube from the device and do not try to implement any changes or modifications. This can lead to a total destruction and to the denial of any warranty claims.
			* Always check the polarity of the connection. Never inverse the polarity – this could lead to total destruction.

Mrs. Kavan: /* Telemetry and settings */

2024-10-17T06:36:48Z

Telemetry and settings

← Older revision		Revision as of 08:36, 17 October 2024
Line 34:		Line 34:
	* '''Actual values''' - Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.		* '''Actual values''' - Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.
	** '''Reset Min/Max''' - Press left+right buttons together to reset all minimums and maximums.		** '''Reset Min/Max''' - Press left+right buttons together to reset all minimums and maximums.
			* '''Settings''' - Basic settings of the sensor.
	~~====~~ Settings ~~====~~		** '''Language''' - You can choose the language of the JETIBOX screen.
	Basic settings of the sensor.		** '''Vario sensitivity''' - Sets the amount of filtering for the pressure sensor data. By increasing the sensitivity you will get faster response to altitude changes. Please note that the indicated noise may be increased as well. (Default value: Medium)
			** '''Sink rate''' - Rate of airplane descent when there are no thermal effects. The value of sink rate is added to the climb rate. This will result in locating thermal streams more precisely.<br>Example: When the model flies at its nominal sink rate 0.5m/s, the vario is silent. As soon as the model enters any thermal upstream, the vario wil start beeping (although the airplane may still be descending).
	~~=====~~ Language ~~=====~~		** '''Sealevel pressure''' - The sea level pressure is taken as a reference to calculate the absolute altitude. To get the most accurate calculation of the altitude, set the pressure at your location adjusted to the sea level. The International Standard Atmosphere Model defines the sea level pressure to be 1013hPa.
	You can choose the language of the JETIBOX screen.		** '''Round altitude''' - Permits or denies rounding the altitude values displayed on the transmitter. Relative and absolute altitude round to full meters, decimal part is omitted.
			** '''Altitude alarm''' - You can set a high altitude alarm. '''*)'''
	~~=====~~ Vario sensitivity ~~=====~~		** '''Vario alarm''' - You can set an alarm for excessive climb or sink rate.'''*)'''
	Sets the amount of filtering for the pressure sensor data. By increasing the sensitivity you will get faster response to altitude changes. Please note that the indicated noise may be increased as well. (Default value: Medium)		** '''Alarm interval''' - Sets the time period between alarm announcement.
			* '''Service''' - In this menu you can view the device version and reset it to the default factory configuration.
	~~======~~ Sink rate ~~======~~
	Rate of airplane descent when there are no thermal effects. The value of sink rate is added to the climb rate. This will result in locating thermal streams more precisely. Example: When the model flies at its nominal sink rate 0.5m/s, the vario is silent. As soon as the model enters any thermal upstream, the vario wil start beeping (although the airplane may still be descending).

	~~=====~~ Sealevel pressure ~~=====~~
	The sea level pressure is taken as a reference to calculate the absolute altitude. To get the most accurate calculation of the altitude, set the pressure at your location adjusted to the sea level. The International Standard Atmosphere Model defines the sea level pressure to be 1013hPa.

	~~=====~~ Round altitude ~~=====~~
	Permits or denies rounding the altitude values displayed on the transmitter. Relative and absolute altitude round to full meters, decimal part is omitted.

	~~=====~~ Altitude alarm ~~=====~~
	You can set a high altitude alarm. '''*)'''

	~~=====~~ Vario alarm ~~=====~~
	You can set an alarm for excessive climb or sink rate.'''*)'''

	~~=====~~ Alarm interval ~~=====~~
	Sets the time period between alarm announcement.

	~~====~~ Service ~~====~~
	In this menu you can view the device version and reset it to the default factory configuration.

	'''*)''' The alarm setting is compatible with Duplex and Hott systems.		'''*)''' The alarm setting is compatible with Duplex and Hott systems.

Mrs. Kavan: /* Actual values */

2024-10-17T06:33:26Z

Actual values

← Older revision		Revision as of 08:33, 17 October 2024
Line 32:		Line 32:
	The device is compatible with JETIBOX for programming. The JETIBOX menu is divided into three sections:		The device is compatible with JETIBOX for programming. The JETIBOX menu is divided into three sections:

	~~====~~ Actual values ~~====~~		* '''Actual values''' - Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.
	Displays the latest telemetry values (altitude, vario, pressure, temperature) together with minimums and maximums.		** '''Reset Min/Max''' - Press left+right buttons together to reset all minimums and maximums.

	Reset Min/Max - ~~press~~ left+right buttons together to reset all minimums and maximums.

	==== Settings ====		==== Settings ====

Mrs. Kavan: /* Introduction */

2024-10-17T06:32:23Z

Introduction

@@ Line 1: / Line 1: @@
-== Introduction ==
+=== Introduction ===
 MicroVario is a sensitive altimeter/variometer which uses the latest MEMS technology to achieve a high level of accuracy, while preserving miniature dimensions. The sensor is able to detect tiny changes in atmospheric pressure to indicate the climb/sink rate.
@@ Line 10: / Line 10: @@
 * Configuration through the transmitter.
 * Firmware updates.
 === Installation ===