KAVAN R10 - User manual - Revision history

Mr. KAVAN at 08:33, 6 May 2026

2026-05-06T08:33:05Z

← Older revision		Revision as of 10:33, 6 May 2026
Line 76:		Line 76:
	=== Status light ===		=== Status light ===
	{\| class="wikitable" style="text-align: center; width: 100%;"		{\| class="wikitable" style="text-align: center; width: 100%;"
	!~~'''~~Green (LoRa)~~'''~~		!Green (LoRa)
	!~~'''~~Blue (FSK)~~'''~~		!Blue (FSK)
	!~~'''~~Red~~'''~~		!Red
	!~~'''~~Status~~'''~~		!Status
	\|-		\|-
	\|On		\|On
Line 114:		Line 114:
	<!--T:12-->		<!--T:12-->
	{\| class="wikitable" style="text-align: center; width: 100%;"		{\| class="wikitable" style="text-align: center; width: 100%;"
	!~~'''~~Yellow~~'''~~		!Yellow
	!~~'''~~State (Accelerometer calibration)~~'''~~		!State (Accelerometer calibration)
	\|-		\|-
	\|On		\|On
Line 129:		Line 129:
	<!--T:13-->		<!--T:13-->
	{\| class="wikitable" style="text-align: center; width: 100%;"		{\| class="wikitable" style="text-align: center; width: 100%;"
	!~~'''~~Yellow~~'''~~		!Yellow
	!~~'''~~State (Self-check)~~'''~~		!State (Self-check)
	\|-		\|-
	\|On		\|On
	\|~~Center~~ detection in progress		\|Centre detection in progress
	\|-		\|-
	\|Blinking		\|Blinking

Mr. KAVAN at 10:35, 16 February 2026

2026-02-16T10:35:58Z

← Older revision		Revision as of 12:35, 16 February 2026
Line 240:		Line 240:

	<!--T:34-->		<!--T:34-->
	Move to the [~~SRX~~ Cali] tool and calibrate the gyroscope sensor		Move to the [SxR Cali] tool and calibrate the gyroscope sensor
	# The gyroscope of the device (6 surfaces) must be calibrated before mounting into the model. Place the device on a flat surface and follow the instructions below to calibrate the gyroscope.		# The gyroscope of the device (6 surfaces) must be calibrated before mounting into the model. Place the device on a flat surface and follow the instructions below to calibrate the gyroscope.
	# Make sure the stabilisation device is lying on the surface with the logo/label facing upwards. Move to the radio and enter the [~~SRX~~ Cali] tool and select "click to confirm". At this moment, the yellow LED light will flash. After it turns off, follow the prompts to calibrate the sensor.		# Make sure the stabilisation device is lying on the surface with the logo/label facing upwards. Move to the radio and enter the [SxR Cali] tool and select "click to confirm". At this moment, the yellow LED light will flash. After it turns off, follow the prompts to calibrate the sensor.
	# Complete the calibration of all the device surfaces. Ensure the value of each axis (X, Y, Z, Mod) is about 1.000 while placing the device in the corresponding direction. The deviation should be within ±0.1.		# Complete the calibration of all the device surfaces. Ensure the value of each axis (X, Y, Z, Mod) is about 1.000 while placing the device in the corresponding direction. The deviation should be within ±0.1.
	# The calibration is completed if all the steps above are done.		# The calibration is completed if all the steps above are done.
Line 330:		Line 330:

	<!--T:42-->		<!--T:42-->
	'''Move to the [~~SRx stab~~] tool, determine the [Wing Type] & [Mounting Type]'''		'''Move to the [SxR Stab] tool, determine the [Wing Type] & [Mounting Type]'''

	<!--T:43-->		<!--T:43-->
Line 343:		Line 343:

	<!--T:44-->		<!--T:44-->
	Check whether the reaction of the wing servo is in line with the flight attitude caption below in the [Auto-Level] mode. If not, please try to invert the corresponding channel output in the [~~SRX~~ Stab] tool.		Check whether the reaction of the wing servo is in line with the flight attitude caption below in the [Auto-Level] mode. If not, please try to invert the corresponding channel output in the [SxR Stab] tool.

	<!--T:45-->		<!--T:45-->
Line 366:		Line 366:

	<!--T:51-->		<!--T:51-->
	{{Note\|type=info\|'''Note:''' If the compensation direction is incorrect, please reverse the corresponding channel as illustrated above through the [~~SRX~~ Stab] tool.}}		{{Note\|type=info\|'''Note:''' If the compensation direction is incorrect, please reverse the corresponding channel as illustrated above through the [SxR Stab] tool.}}

	<!--T:52-->		<!--T:52-->
Line 374:		Line 374:
	=== Self-check (R10 Stabi) ===		=== Self-check (R10 Stabi) ===
	# Make sure the model is in a horizontal position on the ground, then put the throttle to 0, and keep the other channels in the centre position.		# Make sure the model is in a horizontal position on the ground, then put the throttle to 0, and keep the other channels in the centre position.
	# Move to [System] and enter the [~~SRX~~ Stab] tool, then click [Start] and the blue LED light turns on. Once the blue LED starts flashing, we can calibrate the maximum travel of stick channels (excluding the throttle channel).		# Move to [System] and enter the [SxR Stab] tool, then click [Start] and the blue LED light turns on. Once the blue LED starts flashing, we can calibrate the maximum travel of stick channels (excluding the throttle channel).
	# If the calibration is completed, the LED turns off and the servos react left and right to indicate the calibration process is completed.		# If the calibration is completed, the LED turns off and the servos react left and right to indicate the calibration process is completed.

	<!--T:54-->		<!--T:54-->
	{{Note\|type=info\|'''Note:''' To do the Self-check of the stabilisation device, please ensure the stabilisation function is enabled. Enter the [~~SRX~~ Stab] tool and turn On the [Stabilising], then quit the [~~SRX~~ Stab] tool and back into this tool again, now the [Self-check] can be enabled.}}		{{Note\|type=info\|'''Note:''' To do the Self-check of the stabilisation device, please ensure the stabilisation function is enabled. Enter the [SxR Stab] tool and turn On the [Stabilising], then quit the [SxR Stab] tool and back into this tool again, now the [Self-check] can be enabled.}}

	<!--T:55-->		<!--T:55-->
Line 391:		Line 391:

	<!--T:57-->		<!--T:57-->
	Enable the Quick Mode in the [~~SRX~~ Stab] tool.		Enable the Quick Mode in the [SxR Stab] tool.

	<!--T:58-->		<!--T:58-->
Line 505:		Line 505:
	<!--T:71-->		<!--T:71-->
	=== Roll and Pitch Angle throws configuration in Stab mode (R10 Stabi) ===		=== Roll and Pitch Angle throws configuration in Stab mode (R10 Stabi) ===
	{{Note\|type=error\|'''Warning:''' Make sure the [~~SRX~~ Stab] script tool has been downloaded and placed in the [Scripts] folder of the storage card. The tool can be found under the [System] menu page after rebooting the ETHOS system.}}		{{Note\|type=error\|'''Warning:''' Make sure the [SxR Stab] script tool has been downloaded and placed in the [Scripts] folder of the storage card. The tool can be found under the [System] menu page after rebooting the ETHOS system.}}

	<!--T:72-->		<!--T:72-->

Mr. KAVAN at 06:39, 29 January 2026

2026-01-29T06:39:26Z

← Older revision		Revision as of 08:39, 29 January 2026
Line 617:		Line 617:
	KAVAN Europe s.r.o. hereby declares that the radio equipment type R10 and other equipment supplied with it are in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.		KAVAN Europe s.r.o. hereby declares that the radio equipment type R10 and other equipment supplied with it are in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.
	</translate>		</translate>

			[[Category:Manuals]][[Category:Radio Control]][[Category:Receivers]]

Mrs. Kavan at 07:54, 18 December 2025

2025-12-18T07:54:17Z

← Older revision		Revision as of 09:54, 18 December 2025
Line 4:		Line 4:
	=== Introduction ===		=== Introduction ===
	Congratulations on your purchase of the '''KAVAN R10''' advanced 10-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 10 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.		Congratulations on your purchase of the '''KAVAN R10''' advanced 10-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 10 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.

	~~<!--T:102-->~~
	~~{\| class="wikitable" style="text-align: center; width: 100%; background: none;"~~
	\|+
	~~\|[[File:KAVAN R10.png\|center\|frameless\|250x250px]]~~
	~~\|[[File:KAVAN R10 Stabi.png\|center\|frameless\|250x250px]]~~
	\|-
	~~\|[https://kavanrc.com/item/kavan-r10-receiver-168010 '''KAV18.10010'''] '''KAVAN R10'''~~
	~~\|[https://kavanrc.com/item/kavan-r10-stabi-receiver-168011 '''KAV18.10010S'''] '''KAVAN R10 Stabi'''~~
	\|}

	<!--T:2-->		<!--T:2-->
Line 33:		Line 23:
	If you have any questions about the R10 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8:00–16:00, Monday to Friday).		If you have any questions about the R10 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8:00–16:00, Monday to Friday).

	<!--T:~~101~~-->		<!--T:102-->
	[[File:R10 ~~Overview~~.png\|center\|frameless\|~~960x960px~~]]		{\| class="wikitable" style="text-align: center; width: 100%; background: none;"
			\|+
			\|[[File:KAVAN R10.png\|center\|frameless\|250x250px]]
			\|[[File:KAVAN R10 Stabi.png\|center\|frameless\|250x250px]]
			\|-
			\|[https://kavanrc.com/item/kavan-r10-receiver-168010 '''KAV18.10010'''] '''KAVAN R10'''
			\|[https://kavanrc.com/item/kavan-r10-stabi-receiver-168011 '''KAV18.10010S'''] '''KAVAN R10 Stabi'''
			\|}

	<!--T:8-->		<!--T:8-->
Line 56:		Line 53:
	* '''Max. radiated power:''' < 20 dBm		* '''Max. radiated power:''' < 20 dBm
	* '''Operating frequency:''' 2.400–2.4835 GHz		* '''Operating frequency:''' 2.400–2.4835 GHz

			<!--T:101-->
			[[File:R10 Overview.png\|center\|frameless\|960x960px]]

	<!--T:10-->		<!--T:10-->

Mrs. Kavan: Marked this version for translation

2025-12-16T10:36:09Z

Marked this version for translation

← Older revision		Revision as of 12:36, 16 December 2025
Line 5:		Line 5:
	Congratulations on your purchase of the '''KAVAN R10''' advanced 10-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 10 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.		Congratulations on your purchase of the '''KAVAN R10''' advanced 10-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 10 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.

			<!--T:102-->
	{\| class="wikitable" style="text-align: center; width: 100%; background: none;"		{\| class="wikitable" style="text-align: center; width: 100%; background: none;"
	\|+		\|+

Mrs. Kavan at 10:35, 16 December 2025

2025-12-16T10:35:46Z

← Older revision		Revision as of 12:35, 16 December 2025
Line 4:		Line 4:
	=== Introduction ===		=== Introduction ===
	Congratulations on your purchase of the '''KAVAN R10''' advanced 10-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 10 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.		Congratulations on your purchase of the '''KAVAN R10''' advanced 10-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 10 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.

			{\| class="wikitable" style="text-align: center; width: 100%; background: none;"
			\|+
			\|[[File:KAVAN R10.png\|center\|frameless\|250x250px]]
			\|[[File:KAVAN R10 Stabi.png\|center\|frameless\|250x250px]]
			\|-
			\|[https://kavanrc.com/item/kavan-r10-receiver-168010 '''KAV18.10010'''] '''KAVAN R10'''
			\|[https://kavanrc.com/item/kavan-r10-stabi-receiver-168011 '''KAV18.10010S'''] '''KAVAN R10 Stabi'''
			\|}

	<!--T:2-->		<!--T:2-->

Mr. KAVAN at 07:53, 13 June 2025

2025-06-13T07:53:20Z

← Older revision		Revision as of 09:53, 13 June 2025
Line 52:		Line 52:
	* Simultaneous dual-frequency Twin 2.4GHz transmission system with smart pairing		* Simultaneous dual-frequency Twin 2.4GHz transmission system with smart pairing
	* Built-in advanced stabilisation features (R10 Stabi)		* Built-in advanced stabilisation features (R10 Stabi)
	* Built-in high-precision telemetry sensor (altitude, vertical speed etc.)		* Built-in high-precision telemetry sensor (altitude, vertical speed etc.) (R10 Stabi)
	* Black box feature		* Black box feature
	* High maximum operating range		* High maximum operating range

Mr. KAVAN at 10:09, 12 May 2025

2025-05-12T10:09:27Z

← Older revision		Revision as of 12:09, 12 May 2025
Line 39:		Line 39:
	* '''Operating voltage:''' 3.5–12 V (recommended supply 2S LiXX)		* '''Operating voltage:''' 3.5–12 V (recommended supply 2S LiXX)
	* '''Operating current:''' ≤120 mA at 5 V		* '''Operating current:''' ≤120 mA at 5 V
	* '''Vario - vertical speed measurement range:''' ±10 m/s		* '''Vario - vertical speed measurement range:''' ±10 m/s (R10 Stabi)
	* '''Vario - altimeter range and resolution:''' -700 m to 10.000 m, 0.1 m		* '''Vario - altimeter range and resolution:''' -700 m to 10.000 m, 0.1 m (R10 Stabi)
	* '''External voltage measurement range via AIN2:''' 0–35 V		* '''External voltage measurement range via AIN2:''' 0–35 V
	* '''Antenna connector:''' IPEX4		* '''Antenna connector:''' IPEX4

Mr. KAVAN at 08:40, 9 April 2025

2025-04-09T08:40:05Z

← Older revision		Revision as of 10:40, 9 April 2025
Line 28:		Line 28:
	<!--T:8-->		<!--T:8-->
	===Firmware===		===Firmware===
	Download the ~~latest~~ firmware:		Download the firmware:
	* [https://www.kavanrc.com/files/RxFW/FW-TW-R10-R10_Stabi-3.0.1.zip R10/R10 Stabi version 3.0.1]		* [https://www.kavanrc.com/files/RxFW/FW-TW-R10-R10_Stabi-3.0.1.zip R10/R10 Stabi version 3.0.1]
	* [https://www.kavanrc.com/files/RxFW/FW-TW-R10-R10_Stabi-3.0.0.zip R10/R10 Stabi version 3.0.0]		* [https://www.kavanrc.com/files/RxFW/FW-TW-R10-R10_Stabi-3.0.0.zip R10/R10 Stabi version 3.0.0]

Mr. KAVAN at 08:39, 9 April 2025

2025-04-09T08:39:35Z

← Older revision		Revision as of 10:39, 9 April 2025
Line 29:		Line 29:
	===Firmware===		===Firmware===
	Download the latest firmware:		Download the latest firmware:
	* [~~Currently unavailable~~]		* [https://www.kavanrc.com/files/RxFW/FW-TW-R10-R10_Stabi-3.0.1.zip R10/R10 Stabi version 3.0.1]
			* [https://www.kavanrc.com/files/RxFW/FW-TW-R10-R10_Stabi-3.0.0.zip R10/R10 Stabi version 3.0.0]

	<!--T:9-->		<!--T:9-->