KAVAN R6 - User manual/it - Revision history

FuzzyBot: Updating to match new version of source page

2025-12-18T07:48:43Z

Updating to match new version of source page

@@ Line 5: / Line 5: @@
 </div>
 <div lang="en" dir="ltr" class="mw-content-ltr">
@@ Line 29: / Line 19: @@
 <div lang="en" dir="ltr" class="mw-content-ltr">
-[[File:R6 Overview.png|center|frameless|960x960px]]
+{| class="wikitable" style="text-align: center; width: 100%; background: none;"
 </div>
@@ Line 56: / Line 53: @@
 * '''Operating frequency:''' 2.400–2.4835 GHz
 * '''Compatibility:''' 2.4GHz ACCESS transmitters
 </div>

FuzzyBot: Updating to match new version of source page

2025-12-16T10:22:04Z

Updating to match new version of source page

← Older revision		Revision as of 12:22, 16 December 2025
Line 2:		Line 2:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== Introduction ===		=== Introduction ===
	Congratulations on your purchase of the '''KAVAN R6''', a 6-channel telemetry receiver. It operates on ACCESS transmission system and has 6 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength throughout the range. It's especially perfect for gliders, but you can use it for a variety of other models as well. Thanks to its small size and ~~lightweight~~, it is also suitable for small models. With redundancy support, it can be connected as a primary receiver via S.BUS. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices.		Congratulations on your purchase of the '''KAVAN R6''', a 6-channel telemetry receiver. It operates on ACCESS transmission system and has 6 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength throughout the range. It's especially perfect for gliders, but you can use it for a variety of other models as well. Thanks to its small size and light weight, it is also suitable for small models. With redundancy support, it can be connected as a primary receiver via S.BUS. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices.
			</div>

			<div lang="en" dir="ltr" class="mw-content-ltr">
			{\| class="wikitable" style="text-align: center; width: 100%; background: none;"
			\|+
			\|[[File:KAVAN R6.png\|center\|frameless\|250x250px]]
			\|[[File:KAVAN R6 Vario.png\|center\|frameless\|250x250px]]
			\|-
			\|[https://kavanrc.com/item/kavan-r6-receiver-162639 '''KAV18.10006'''] '''KAVAN R6'''
			\|[https://kavanrc.com/item/kavan-r6-vario-receiver-162640 '''KAV18.10006V'''] '''KAVAN R6 Vario'''
			\|}
	</div>		</div>

Line 23:		Line 34:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	===Firmware===		===Firmware===
	Download the latest firmware:		Download the latest firmware '''Archer Plus R6 / GR6 (vario)''' in the ETHOS Suite or directly:
	* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6-3.0.1.zip R6/GR6 version 3.0.1]		* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6-3.0.1.zip R6/GR6 version 3.0.1]
	* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6-3.0.0.zip R6/GR6 version 3.0.0]		* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6-3.0.0.zip R6/GR6 version 3.0.0]
Line 242:		Line 253:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== Range check ===		=== Range check ===
	A range check should be performed before each flight in case loss of signal is caused by reflection from metal or concrete structures and blocking of the signal by buildings or trees during flight.		A range check should be performed before each flight in case a loss of signal is caused by reflection from metal or concrete structures, and the blocking of the signal by buildings or trees during flight.
	</div>		</div>

Line 264:		Line 275:

	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	'''Custom:''' The receiver keeps the rate values on all channels as you preselect it. Select the Fail-safe setting menu. Switch from Disconnect/Hold/Not Set to "Custom". Select the channel for which you want to set fail-safe rates and confirm the selection. Then set the rates on each desired channel and confirm the selection. Wait 9 seconds for the Fail-safe setting change to take effect.		'''Custom:''' The receiver keeps the rate values on all channels as you preselect them. Select the Fail-safe setting menu. Switch from Disconnect/Hold/Not Set to "Custom". Select the channel for which you want to set fail-safe rates and confirm the selection. Then set the rates on each desired channel and confirm the selection. Wait 9 seconds for the Fail-safe setting change to take effect.
	{{Note\|type=info\|'''Note:''' If fail-safe is not set, the model will always operate with the last functional state of the channels before the signal loss. This could cause ~~potential~~ damage. If fail-safe is disabled on the RF module side, the receiver will go to the default Hold mode. Do not set the Fail-safe mode for the ~~SBUS~~ port to No Signal mode as the signal would be continuously transmitted~~, set~~ the ~~SBUS~~ port to Hold or Custom mode.}}		{{Note\|type=info\|'''Note:''' If the fail-safe is not set, the model will always operate with the last functional state of the channels before the signal loss. This could potentially cause damage. If the fail-safe is disabled on the RF module side, the receiver will go to the default Hold mode. Do not set the Fail-safe mode for the S.BUS port to No Signal mode, as the signal would be continuously transmitted. Set the S.BUS port to Hold or Custom mode instead.}}
	</div>		</div>

Line 279:		Line 290:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== Recycling (European Union) ===		=== Recycling (European Union) ===
			[[File:WEEE.svg\|right\|frameless\|50x50px]]
	Electrical equipment bearing the crossed-out bin symbol must not be disposed of in normal household waste but must instead be taken to a specialised collection and recycling facility. In EU (European Union) countries, electrical equipment must not be disposed of in normal household waste (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take unwanted equipment to your nearest collection or recycling centre. The equipment will then be disposed of or recycled safely free of charge. By handing in your unwanted equipment, you can make an important contribution to protecting the environment.		Electrical equipment bearing the crossed-out bin symbol must not be disposed of in normal household waste but must instead be taken to a specialised collection and recycling facility. In EU (European Union) countries, electrical equipment must not be disposed of in normal household waste (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take unwanted equipment to your nearest collection or recycling centre. The equipment will then be disposed of or recycled safely free of charge. By handing in your unwanted equipment, you can make an important contribution to protecting the environment.
	</div>		</div>
Line 284:		Line 296:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== EU declaration of conformity ===		=== EU declaration of conformity ===
			[[File:CE.svg\|right\|frameless\|50x50px]]
	KAVAN Europe s.r.o. hereby declares that the radio equipment type: R6 and other equipment supplied with it comply with Directive 2014/53/EU. The full form of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.		KAVAN Europe s.r.o. hereby declares that the radio equipment type: R6 and other equipment supplied with it comply with Directive 2014/53/EU. The full form of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.
	</div>		</div>

FuzzyBot: Updating to match new version of source page

2025-04-15T05:34:30Z

Updating to match new version of source page

← Older revision		Revision as of 07:34, 15 April 2025
Line 24:		Line 24:
	===Firmware===		===Firmware===
	Download the latest firmware:		Download the latest firmware:
	* [https://www.kavanrc.com/files/RxFW/FW-~~R6_GR6_R6FB_GR6FB_1~~.0.10.zip R6/GR6/~~R6FB~~/~~GR6FB~~ version 1.0.10]		* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6-3.0.1.zip R6/GR6 version 3.0.1]
			* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6-3.0.0.zip R6/GR6 version 3.0.0]
			* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6-1.0.10.zip R6/GR6 version 1.0.10]
	</div>		</div>

FuzzyBot: Updating to match new version of source page

2025-03-26T10:24:51Z

Updating to match new version of source page

← Older revision		Revision as of 12:24, 26 March 2025
Line 190:		Line 190:

	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	<html><iframe width="960" height="540" src="https://www.youtube.com/embed/uj7aG6ilVyQ?si=BfftEixPye3fRU4q" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html>		<div class="videoWrapper"><html><iframe width="960" height="540" src="https://www.youtube.com/embed/uj7aG6ilVyQ?si=BfftEixPye3fRU4q" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html></div>
	</div>		</div>

FuzzyBot: Updating to match new version of source page

2024-12-17T10:07:26Z

Updating to match new version of source page

← Older revision		Revision as of 12:07, 17 December 2024
Line 15:		Line 15:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	If you have any questions about the R6 receiver and its operation, please contact the technical support and service staff at '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during business hours 8 am–4 pm, Monday–Friday).		If you have any questions about the R6 receiver and its operation, please contact the technical support and service staff at '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during business hours 8 am–4 pm, Monday–Friday).
			</div>

			<div lang="en" dir="ltr" class="mw-content-ltr">
			[[File:R6 Overview.png\|center\|frameless\|960x960px]]
	</div>		</div>

Line 56:		Line 60:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== LED indicator ===		=== LED indicator ===
	{\| class="wikitable"		{\| class="wikitable" style="width: 100%; text-align: center;"
	\|+		\|+
	!'''Green'''		!'''Green'''

FuzzyBot: Updating to match new version of source page

2024-10-17T12:23:04Z

Updating to match new version of source page

← Older revision		Revision as of 14:23, 17 October 2024
Line 182:		Line 182:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	==== Video tutorial ====		==== Video tutorial ====
	If you're ~~not feeling confident enough after reading these steps~~, please follow our video tutorial showing an alternative more straightforward method.		If you're still having problems with registration and pairing, please follow our video tutorial showing an alternative more straightforward method.
	</div>		</div>

FuzzyBot: Updating to match new version of source page

2024-10-17T12:19:15Z

Updating to match new version of source page

← Older revision		Revision as of 14:19, 17 October 2024
Line 2:		Line 2:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== Introduction ===		=== Introduction ===
	Congratulations on your purchase of the '''KAVAN R6''', a 6-channel telemetry receiver. It operates on ACCESS ~~and ACCST D16~~ transmission ~~systems~~ and has 6 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength throughout the range. It's especially perfect for gliders, but you can use it for a variety of other models as well. Thanks to its small size and lightweight, it is also suitable for small models. With redundancy support, it can be connected as a primary receiver via S.BUS. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices.		Congratulations on your purchase of the '''KAVAN R6''', a 6-channel telemetry receiver. It operates on ACCESS transmission system and has 6 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength throughout the range. It's especially perfect for gliders, but you can use it for a variety of other models as well. Thanks to its small size and lightweight, it is also suitable for small models. With redundancy support, it can be connected as a primary receiver via S.BUS. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices.
	</div>		</div>

Line 38:		Line 38:
	* '''Max. radiated power:''' < 20 dBm		* '''Max. radiated power:''' < 20 dBm
	* '''Operating frequency:''' 2.400–2.4835 GHz		* '''Operating frequency:''' 2.400–2.4835 GHz
	* '''Compatibility:''' 2.4GHz ACCESS ~~/ ACCST D16 V2~~ transmitters		* '''Compatibility:''' 2.4GHz ACCESS transmitters
	</div>		</div>

Line 44:		Line 44:
	=== Features ===		=== Features ===
	* Increased RF interference protection and more stable RF transmission		* Increased RF interference protection and more stable RF transmission
	* ACCESS ~~and ACCST D16~~ transmission ~~modes~~ with smart pairing		* ACCESS transmission mode with smart pairing
	* Basic black box function support		* Basic black box function support
	* 6 high-precision PWM channels		* 6 high-precision PWM channels
Line 181:		Line 181:

	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	==== ~~ACCST protocol D16~~ ====		==== Video tutorial ====
	~~The ACCST D16 protocol does~~ not ~~use a registration system~~, ~~but only a pairing system.~~		If you're not feeling confident enough after reading these steps, please follow our video tutorial showing an alternative more straightforward method.
	~~</div>~~


	~~<div lang="en" dir="ltr" class="mw-content-ltr">~~
	~~Procedure:~~
	~~</div>~~

	~~<div lang="en" dir="ltr" class="mw-content-ltr">~~
	~~1. Turn off the power to the receiver~~.
	</div>		</div>

	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	2. Select '''[Pairing]''', a pop-up window will appear with a selection of channels, once selected, start the pairing process. Every few seconds, a "Pairing" voice alert will sound to confirm that you are in pairing mode. The pop-up window will display the message "Pairing ...".		<html><iframe width="960" height="540" src="https://www.youtube.com/embed/uj7aG6ilVyQ?si=BfftEixPye3fRU4q" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html>
	<~~/div~~>

	<~~div lang~~="en" ~~dir~~="~~ltr~~" ~~class~~="~~mw-content-ltr">~~
	~~3. Turn on the receiver, while holding the pairing button F~~/S. ~~A window will appear with the message "Select Device" and the name of the receiver you just turned on~~.
	</~~div>~~

	~~<div lang~~="~~en" dir~~="~~ltr~~" ~~class~~="~~mw-content-ltr~~">
	~~4. Scroll to the receiver name and select it. A window will appear with a message that the pairing was successful.~~
	~~</div>~~

	~~<div lang~~="~~en" dir="ltr" class="mw~~-~~content~~-~~ltr">~~
	~~5. Switch off the transmitter and receiver.~~
	~~</div>~~

	~~<div lang="en" dir="ltr" class="mw~~-~~content~~-~~ltr~~">
	6. Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.
	~~</div>~~

	~~<div lang~~="~~en" dir="ltr" class="mw~~-~~content~~-~~ltr">~~
	~~• The receiver will only be controlled by the transmitter it is paired to. Other transmitters in its vicinity will not affect its operation.~~
	~~</div>~~

	~~<div lang="en" dir="ltr" class="mw~~-~~content~~-~~ltr~~">
	~~• The name of the RX1 receiver will now be displayed next to the selected receiver.~~
	</~~div~~>

	<~~div lang="en" dir="ltr" class="mw-content-ltr"~~>
	~~• The receiver is now ready for use.~~
	</div>		</div>

Line 332:		Line 295:
	* Incorrect wiring.		* Incorrect wiring.
	* Use of accessories not approved or recommended by KAVAN Europe s.r.o.		* Use of accessories not approved or recommended by KAVAN Europe s.r.o.
	* Modifications or repairs not carried out by an authorised KAVAN Europe ~~Ltd~~.		* Modifications or repairs not carried out by an authorised KAVAN Europe s.r.o.
	* Inadvertent or deliberate damage.		* Inadvertent or deliberate damage.
	* Normal wear and tear.		* Normal wear and tear.

FuzzyBot: Updating to match new version of source page

2024-08-12T06:58:21Z

Updating to match new version of source page

← Older revision		Revision as of 08:58, 12 August 2024
Line 38:		Line 38:
	* '''Max. radiated power:''' < 20 dBm		* '''Max. radiated power:''' < 20 dBm
	* '''Operating frequency:''' 2.400–2.4835 GHz		* '''Operating frequency:''' 2.400–2.4835 GHz
	* '''Compatibility:''' 2.4GHz ACCESS / ACCST D16 transmitters		* '''Compatibility:''' 2.4GHz ACCESS / ACCST D16 V2 transmitters
	</div>		</div>

FuzzyBot: Updating to match new version of source page

2024-07-23T09:45:00Z

Updating to match new version of source page

← Older revision		Revision as of 11:45, 23 July 2024
Line 15:		Line 15:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	If you have any questions about the R6 receiver and its operation, please contact the technical support and service staff at '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during business hours 8 am–4 pm, Monday–Friday).		If you have any questions about the R6 receiver and its operation, please contact the technical support and service staff at '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during business hours 8 am–4 pm, Monday–Friday).
			</div>

			<div lang="en" dir="ltr" class="mw-content-ltr">
			===Firmware===
			Download the latest firmware:
			* [https://www.kavanrc.com/files/RxFW/FW-R6_GR6_R6FB_GR6FB_1.0.10.zip R6/GR6/R6FB/GR6FB version 1.0.10]
	</div>		</div>

Line 309:		Line 315:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== EU declaration of conformity ===		=== EU declaration of conformity ===
	KAVAN Europe s.r.o. hereby declares that the radio equipment type: R6 and other equipment supplied with it comply with Directive 2014/53/EU. The full form of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.		KAVAN Europe s.r.o. hereby declares that the radio equipment type: R6 and other equipment supplied with it comply with Directive 2014/53/EU. The full form of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.
	</div>		</div>

FuzzyBot: Updating to match new version of source page

2024-05-07T09:59:40Z

Updating to match new version of source page

← Older revision		Revision as of 11:59, 7 May 2024
Line 2:		Line 2:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	=== Introduction ===		=== Introduction ===
	~~The 6-channel telemetry receiver~~ '''KAVAN R6''' operates on ACCESS and ACCST D16 transmission systems and has 6 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength throughout the range. It's especially perfect for gliders, but you can use it for a variety of other models as well. Thanks to its small size and ~~light weight~~, it is also suitable for small models. With redundancy support, it can be connected as a primary receiver via S.BUS. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices.		Congratulations on your purchase of the '''KAVAN R6''', a 6-channel telemetry receiver. It operates on ACCESS and ACCST D16 transmission systems and has 6 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength throughout the range. It's especially perfect for gliders, but you can use it for a variety of other models as well. Thanks to its small size and lightweight, it is also suitable for small models. With redundancy support, it can be connected as a primary receiver via S.BUS. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices.
	</div>		</div>

Line 56:		Line 56:
	!'''Status'''		!'''Status'''
	\|-		\|-
	!On		\|On
	!On		\|On
	!Registration		\|Registration
	\|-		\|-
	!Blinking		\|Blinking
	!Blinking		\|Blinking
	!Registration complete		\|Registration complete
	\|-		\|-
	!On		\|On
	!On		\|On
	!Pairing		\|Pairing
	\|-		\|-
	\|On		\|On
Line 109:		Line 109:

	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	'''RID:''' This is the unique identifier of the transmitter. It can be changed to the same/own code to use the Smart share feature for sharing models (if you want to share models and own multiple transmitters, or if you share models with other ~~modelers~~, you must have the same RID set on those transmitters). The RID is the transmitter data (Owner Registration ID) written into the receiver's memory. If two transmitters have the same RID, you can easily share models including receivers between them using the Smart share function.		'''RID:''' This is the unique identifier of the transmitter. It can be changed to the same/own code to use the Smart share feature for sharing models (if you want to share models and own multiple transmitters, or if you share models with other modellers, you must have the same RID set on those transmitters). The RID is the transmitter data (Owner Registration ID) written into the receiver's memory. If two transmitters have the same RID, you can easily share models including receivers between them using the Smart share function.
	</div>		</div>

Line 126:		Line 126:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	5. Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.		5. Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.
	'''Caution:''' Do not perform pairing with an electric motor connected or an internal combustion engine started.		{{Note\|type=error\|'''Caution:''' Do not perform pairing with an electric motor connected or an internal combustion engine started.}}
	</div>		</div>

Line 185:		Line 185:

	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	1. Turn off power to the receiver.		1. Turn off the power to the receiver.
	</div>		</div>

Line 224:		Line 224:
	# .In the factory settings, this function is disabled (OFF).		# .In the factory settings, this function is disabled (OFF).
	# To open the receiver's setup menu, select '''[Setup]''' in the RF system menu for the receiver.		# To open the receiver's setup menu, select '''[Setup]''' in the RF system menu for the receiver.
	# Select '''[ON]''' in the high-speed PWM setting		# Select '''[ON]''' in the high-speed PWM setting.
	'''Caution:''' The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.		{{Note\|type=error\|'''Caution:''' The high-speed PWM mode is used only for digital servos. Turn off the high-speed PWM mode when using analogue servos, as the servos will become hot and may burn.}}
	</div>		</div>

Line 262:		Line 262:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	Wait 3 seconds, the receiver is working properly at this time.		Wait 3 seconds, the receiver is working properly at this time.
	'''Note:''' Do not perform the Pairing/Registration close by during the firmware update.		{{Note\|type=info\|'''Note:''' Do not perform the Pairing/Registration close by during the firmware update.<br>Do not update the firmware until after the receiver is registered (OTA).}}
	~~</div>~~

	<~~div lang="en" dir="ltr" class="mw-content-ltr"~~>
	~~'''Note:'''~~ Do not update the firmware until after the receiver is registered (OTA).
	</div>		</div>

Line 294:		Line 290:
	<div lang="en" dir="ltr" class="mw-content-ltr">		<div lang="en" dir="ltr" class="mw-content-ltr">
	'''Custom:''' The receiver keeps the rate values on all channels as you preselect it. Select the Fail-safe setting menu. Switch from Disconnect/Hold/Not Set to "Custom". Select the channel for which you want to set fail-safe rates and confirm the selection. Then set the rates on each desired channel and confirm the selection. Wait 9 seconds for the Fail-safe setting change to take effect.		'''Custom:''' The receiver keeps the rate values on all channels as you preselect it. Select the Fail-safe setting menu. Switch from Disconnect/Hold/Not Set to "Custom". Select the channel for which you want to set fail-safe rates and confirm the selection. Then set the rates on each desired channel and confirm the selection. Wait 9 seconds for the Fail-safe setting change to take effect.
	'''Note:''' If fail-safe is not set, the model will always operate with the last functional state of the channels before signal loss. This could cause potential damage. If fail-safe is disabled on the RF module side, the receiver will go to the default Hold mode. Do not set the Fail-safe mode for the SBUS port to No Signal mode as the signal would be continuously transmitted, set the SBUS port to Hold or Custom mode.		{{Note\|type=info\|'''Note:''' If fail-safe is not set, the model will always operate with the last functional state of the channels before the signal loss. This could cause potential damage. If fail-safe is disabled on the RF module side, the receiver will go to the default Hold mode. Do not set the Fail-safe mode for the SBUS port to No Signal mode as the signal would be continuously transmitted, set the SBUS port to Hold or Custom mode.}}
	</div>		</div>