KAVAN R8 - User manual/en - Revision history

FuzzyBot: Updating to match new version of source page

2025-12-18T07:52:46Z

Updating to match new version of source page

← Older revision		Revision as of 09:52, 18 December 2025
Line 2:		Line 2:
	=== Introduction ===		=== Introduction ===
	Congratulations on your purchase of the '''KAVAN R8''' advanced 8-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 8 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.		Congratulations on your purchase of the '''KAVAN R8''' advanced 8-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 8 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.

			It features advanced interference suppression for reliable, stable signal transmission across the entire range. Smart transmission system matching speeds up pairing. The black box function stores essential flight data. Receiver operating statuses are indicated by an LED indicator. Smart pairing allows firmware updates wirelessly.

			It is also available in a variometer-equipped version, which provides more accurate and faster measurement and transmission of altitude and vertical speed data. It also allows instant audio feedback from the variometer for Twin 2.4GHz transmitters.

			If you have any questions about the R8 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8am–16pm, Monday to Friday).

	{\| class="wikitable" style="text-align: center; width: 100%; background: none;"		{\| class="wikitable" style="text-align: center; width: 100%; background: none;"
Line 11:		Line 17:
	\|[https://kavanrc.com/item/kavan-r8-vario-receiver-162642 '''KAV18.10008V'''] '''KAVAN R8 Vario'''		\|[https://kavanrc.com/item/kavan-r8-vario-receiver-162642 '''KAV18.10008V'''] '''KAVAN R8 Vario'''
	\|}		\|}

	It features advanced interference suppression for reliable, stable signal transmission across the entire range. Smart transmission system matching speeds up pairing. The black box function stores essential flight data. Receiver operating statuses are indicated by an LED indicator. Smart pairing allows firmware updates wirelessly.

	It is also available in a variometer-equipped version, which provides more accurate and faster measurement and transmission of altitude and vertical speed data. It also allows instant audio feedback from the variometer for Twin 2.4GHz transmitters.

	If you have any questions about the R8 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8am–16pm, Monday to Friday).

	~~[[File:R8 Overview.png\|center\|frameless\|960x960px]]~~

	===Firmware===		===Firmware===
Line 42:		Line 40:
	* '''Max. radiated power:''' < 20 dBm		* '''Max. radiated power:''' < 20 dBm
	* '''Operating frequency:''' 2.400–2.4835 GHz		* '''Operating frequency:''' 2.400–2.4835 GHz

			[[File:R8 Overview.png\|center\|frameless\|960x960px]]

	=== Functions ===		=== Functions ===

FuzzyBot: Updating to match new version of source page

2025-12-16T10:32:20Z

Updating to match new version of source page

← Older revision		Revision as of 12:32, 16 December 2025
Line 2:		Line 2:
	=== Introduction ===		=== Introduction ===
	Congratulations on your purchase of the '''KAVAN R8''' advanced 8-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 8 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.		Congratulations on your purchase of the '''KAVAN R8''' advanced 8-channel telemetry receiver. It operates on a 2.4GHz simultaneous dual-frequency transmission system '''Twin 2.4GHz'''. It has 8 high-precision PWM channels and 16 or 24-channel modes using S.BUS. Two detachable antennas with IPEX4 connectors provide full signal strength over a range of up to tens of kilometres. It is especially ideal for gliders, but you can also use it for other various models. With redundancy support, it can be connected as a primary receiver via S.BUS. With the '''Twin 2.4GHz''' protocol, both receivers work fully simultaneously in this connection. Thanks to the F.BUS connection option, you can also pair it quickly and easily to several different telemetry devices, providing bidirectional data transmission via a single cable.

			{\| class="wikitable" style="text-align: center; width: 100%; background: none;"
			\|+
			\|[[File:KAVAN R8.png\|center\|frameless\|250x250px]]
			\|[[File:KAVAN R8 Vario.png\|center\|frameless\|250x250px]]
			\|-
			\|[https://kavanrc.com/item/kavan-r8-receiver-162641 '''KAV18.10008'''] '''KAVAN R8'''
			\|[https://kavanrc.com/item/kavan-r8-vario-receiver-162642 '''KAV18.10008V'''] '''KAVAN R8 Vario'''
			\|}

	It features advanced interference suppression for reliable, stable signal transmission across the entire range. Smart transmission system matching speeds up pairing. The black box function stores essential flight data. Receiver operating statuses are indicated by an LED indicator. Smart pairing allows firmware updates wirelessly.		It features advanced interference suppression for reliable, stable signal transmission across the entire range. Smart transmission system matching speeds up pairing. The black box function stores essential flight data. Receiver operating statuses are indicated by an LED indicator. Smart pairing allows firmware updates wirelessly.

FuzzyBot: Updating to match new version of source page

2025-04-15T06:16:57Z

Updating to match new version of source page

← Older revision		Revision as of 08:16, 15 April 2025
Line 12:		Line 12:

	===Firmware===		===Firmware===
	Download the ~~latest~~ firmware:		Download the firmware:
			* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-3.0.2.zip R8/GR8 version 3.0.2]
			* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-3.0.1.zip R8/GR8 version 3.0.1]
			* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-3.0.0.zip R8/GR8 version 3.0.0]
	* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.9.zip R8/GR8 version 1.0.9]		* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.9.zip R8/GR8 version 1.0.9]
			* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.8.zip R8/GR8 version 1.0.8]

	=== Technical specifications ===		=== Technical specifications ===
Line 108:		Line 112:
	If you're still having problems with registration and pairing, please follow our video tutorial showing an alternative more straightforward method.		If you're still having problems with registration and pairing, please follow our video tutorial showing an alternative more straightforward method.

	<html><iframe width="960" height="540" src="https://www.youtube.com/embed/7UiFpxSuor8?si=h4ykDvnJDx9g6Z5o" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html>		<div class="videoWrapper"><html><iframe width="960" height="540" src="https://www.youtube.com/embed/7UiFpxSuor8?si=h4ykDvnJDx9g6Z5o" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html></div>

	=== How to set up telemetry altitude data ===		=== How to set up telemetry altitude data ===

FuzzyBot: Updating to match new version of source page

2024-12-17T10:09:06Z

Updating to match new version of source page

← Older revision		Revision as of 12:09, 17 December 2024
Line 8:		Line 8:

	If you have any questions about the R8 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8am–16pm, Monday to Friday).		If you have any questions about the R8 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8am–16pm, Monday to Friday).

			[[File:R8 Overview.png\|center\|frameless\|960x960px]]

	===Firmware===		===Firmware===
Line 41:		Line 43:

	=== Status light ===		=== Status light ===
	{\| class="wikitable"		{\| class="wikitable" style="width: 100%; text-align: center;"
	!'''Green'''		!'''Green'''
	!'''Red'''		!'''Red'''

FuzzyBot: Updating to match new version of source page

2024-12-11T10:30:14Z

Updating to match new version of source page

← Older revision		Revision as of 12:30, 11 December 2024
Line 32:		Line 32:
	* Increased protection against RF interference and more stable RF transmission		* Increased protection against RF interference and more stable RF transmission
	* Simultaneous dual-frequency Twin 2.4GHz transmission system with smart pairing		* Simultaneous dual-frequency Twin 2.4GHz transmission system with smart pairing
	* ~~Features of the black cabinet~~		* Black box feature
	* High maximum operating range		* High maximum operating range
	* Wireless firmware updates (OTA)		* Wireless firmware updates (OTA)
Line 77:		Line 77:
	Procedure:		Procedure:

	1. Start the registration process by selecting '''[Register]'''.		# Start the registration process by selecting '''[Register]'''.
			# A window will appear with the message "Waiting...." with a repeating voice message "Register".
			# Hold down the pairing button on the receiver and switch it on. Wait for the red and green LEDs to light up. The RID and UID can be set at this stage:
			#* '''RID:''' This is the unique identifier of the transmitter. It can be changed to the same/own code to use the Smart share feature for model sharing (if you want to share models and own multiple transmitters, or if you share models with other modellers, you must have the same RID set on those transmitters). The RID is the transmitter data (Owner Registration ID) written into the receiver's memory. If two transmitters have the same RID, you can easily share models including receivers between them using the Smart share function.
			#* '''RX name:''' the naming of the receiver is done automatically when the receiver is paired for the first time. This name can be changed at any time. This is useful when using more than one receiver, e.g. to remember the settings of the receivers, e.g. '''RX4R1''' is for CH1-8 or '''RX4R2''' is for CH9-16 or '''RX4R3''' is for CH17-24.
			#* '''UID:''' is used to distinguish multiple receivers used simultaneously in one model. A default value of 0 can be left for a single receiver. If more than one receiver is to be used in one model, the UID must be changed, usually '''0''' for CH1-8, '''1''' for CH9-16 and '''2''' for CH17-24. Note that this UID cannot be read back from the receiver, so it is a good idea to tag the receiver.
			# Press the '''[Register]''' button to complete the settings. The "Registration OK" dialog box will appear. Press the '''[OK]''' button to continue.
			# Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.

	~~2. A window will appear with the message "Waiting...." with a repeating voice message "Register".~~

	~~3. Hold down the pairing button on the receiver and switch it on. Wait for the red and green LEDs to light up. The RID and UID can be set at this stage:~~

	'''RID:''' This is the unique identifier of the transmitter. It can be changed to the same/own code to use the Smart share feature for model sharing (if you want to share models and own multiple transmitters, or if you share models with other modellers, you must have the same RID set on those transmitters). The RID is the transmitter data (Owner Registration ID) written into the receiver's memory. If two transmitters have the same RID, you can easily share models including receivers between them using the Smart share function.

	'''RX name:''' the naming of the receiver is done automatically when the receiver is paired for the first time. This name can be changed at any time. This is useful when using more than one receiver, e.g. to remember the settings of the receivers, e.g. '''RX4R1''' is for CH1-8 or '''RX4R2''' is for CH9-16 or '''RX4R3''' is for CH17-24.

	'''UID:''' is used to distinguish multiple receivers used simultaneously in one model. A default value of 0 can be left for a single receiver. If more than one receiver is to be used in one model, the UID must be changed, usually '''0''' for CH1-8, '''1''' for CH9-16 and '''2''' for CH17-24. Note that this UID cannot be read back from the receiver, so it is a good idea to tag the receiver.

	~~4. Press the '''[Register]''' button to complete the settings. The "Registration OK" dialog box will appear. Press the '''[OK]''' button to continue.~~

	~~5. Turn off the receiver. This registers the receiver. However, you still need to pair it with the transmitter to use it.~~
	{{Note\|type=error\|'''Caution:''' Do not pair with an electric motor connected or with an internal combustion engine running.}}		{{Note\|type=error\|'''Caution:''' Do not pair with an electric motor connected or with an internal combustion engine running.}}

Line 97:		Line 91:
	Receiver pairing allows a receiver registered in phase 1 to be paired with one of the transmitters. After that, the receiver will only communicate with that transmitter unless you pair it with another transmitter. Before using the transmitter for the first time, you must check the range of the transmitter!		Receiver pairing allows a receiver registered in phase 1 to be paired with one of the transmitters. After that, the receiver will only communicate with that transmitter unless you pair it with another transmitter. Before using the transmitter for the first time, you must check the range of the transmitter!

	1. Turn off the power to the receiver.		# Turn off the power to the receiver.
			# RX 1 '''[Pairing]''': Select '''[Pairing]''' to start the pairing process. Every few seconds, a "Pairing" voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message " Waiting for receiver...".
	2. RX 1 '''[Pairing]''': Select '''[Pairing]''' to start the pairing process. Every few seconds, a "Pairing" voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message " Waiting for receiver...".		# Switch on the receiver without holding the F/S pairing button. A window will appear with the message "Selecting Device" and the name of the receiver you have just switched on.
			# Scroll to the receiver name and select it. A window will appear with a message that the pairing was successful.
	3. Switch on the receiver without holding the F/S pairing button. A window will appear with the message "Selecting Device" and the name of the receiver you have just switched on.		# Turn off the transmitter and receiver.
			# Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.
	4. Scroll to the receiver name and select it. A window will appear with a message that the pairing was successful.

	5. Turn off the transmitter and receiver.

	6. Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.

	• The receiver will only be controlled by the transmitter it is paired to. Other transmitters in its vicinity do not affect its function.		* The receiver will only be controlled by the transmitter it is paired to. Other transmitters in its vicinity do not affect its function.
			* The name of the selected RX1 receiver will now be displayed next to it.
	• The name of the selected RX1 receiver will now be displayed next to it.		* The receiver is now ready for use.
			* If redundant wiring is required, repeat for receivers 2 and 3.
	• The receiver is now ready for use.

	• If redundant wiring is required, repeat for receivers 2 and 3.

	==== Video tutorial ====		==== Video tutorial ====
Line 166:		Line 152:

	'''KAVAN Europe s.r.o. \| Doubravice 110, 533 Pardubice \| Czech Republic \| +420 466 260 133 \| info@kavanrc.com'''		'''KAVAN Europe s.r.o. \| Doubravice 110, 533 Pardubice \| Czech Republic \| +420 466 260 133 \| info@kavanrc.com'''

			=== Warranty and limitation of liability ===
			As the manufacturer of this product, we have no control over your compliance with these instructions when wiring and installing the RC set into your model. Likewise, we have no control over the way you build, operate and maintain the RC set parts. For this reason, KAVAN must disclaim all liability for any loss, damage or financial cost that is caused by the improper use or operation of products imported by us, or that is in any way connected with such activity.

			Except as otherwise provided by law, KAVAN‘s obligation to pay compensation shall (regardless of the legal arguments asserted) be limited to the purchase price for those KAVAN products that were directly involved in the event that caused the damage. This does not apply if the manufacturer has been judicially obliged to make unlimited compensation on the basis of proven wilful or gross negligence. We warrant that our products are in compliance with current legal provisions. The warranty does not cover failures and defects caused by:
			* Misuse or improper use.
			* Delayed, improper or no maintenance, or maintenance performed by unauthorized service.
			* Incorrect wiring.
			* Use of accessories not approved or recommended by KAVAN Europe s.r.o.
			* Modifications or repairs not carried out by an authorised KAVAN Europe s.r.o.
			* Inadvertent or deliberate damage.
			* Normal wear and tear.
			* Operation of the equipment outside the operating limits specified in the specification

			KAVAN Europe s.r.o. warrants that this product is free from defects in both material and workmanship at the time of sale. KAVAN Europe s.r.o. also reserves the right to change or modify this warranty without notice. The equipment is subject to continuous improvement and refinement - the manufacturer reserves the right to change the design without notice.

			This warranty certificate entitles you to a free warranty repair of the product supplied by KAVAN Europe s.r.o. within a period of 24 months. The warranty does not cover natural wear and tear due to normal use, as this is a product for modelling use, where the individual parts operate under much higher loads than normal toys are subjected to.

			The warranty also does not cover any part of the equipment that has been improperly installed, roughly or improperly handled, or damaged in an accident, or any part of the equipment that has been repaired or altered by an unauthorized person (this includes the application of any waterproof sprays/coatings by the user). Like other fine electronics products, do not expose this equipment to high temperatures, low temperatures, moisture, dusty environments, violent mechanical shocks and impacts. Do not leave it in direct sunlight for extended periods of time.

			Please claim warranty repairs from the shop where you purchased the set.

	=== Recycling (European Union) ===		=== Recycling (European Union) ===
			[[File:WEEE.svg\|right\|frameless\|50x50px]]
	Electrical equipment bearing the crossed-out bin symbol must not be disposed of in normal household waste but must instead be taken to a specialised collection and recycling facility. In EU (European Union) countries, electrical equipment must not be disposed of in normal household waste (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take unwanted equipment to your nearest collection or recycling centre. The equipment will then be disposed of or recycled safely free of charge. By handing in your unwanted equipment, you can make an important contribution to protecting the environment.		Electrical equipment bearing the crossed-out bin symbol must not be disposed of in normal household waste but must instead be taken to a specialised collection and recycling facility. In EU (European Union) countries, electrical equipment must not be disposed of in normal household waste (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take unwanted equipment to your nearest collection or recycling centre. The equipment will then be disposed of or recycled safely free of charge. By handing in your unwanted equipment, you can make an important contribution to protecting the environment.

	=== EU declaration of conformity ===		=== EU declaration of conformity ===
			[[File:CE.svg\|right\|frameless\|50x50px]]
	KAVAN Europe s.r.o. hereby declares that the radio equipment type R8 and other equipment supplied with it are in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.		KAVAN Europe s.r.o. hereby declares that the radio equipment type R8 and other equipment supplied with it are in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.

FuzzyBot: Updating to match new version of source page

2024-11-08T08:00:32Z

Updating to match new version of source page

← Older revision		Revision as of 10:00, 8 November 2024
Line 40:		Line 40:
	* F.BUS / S.Port		* F.BUS / S.Port

	=== Status light ~~(ACCESS)~~ ===		=== Status light ===
	{\| class="wikitable"		{\| class="wikitable"
	!'''Green'''		!'''Green'''

FuzzyBot: Updating to match new version of source page

2024-10-17T12:26:57Z

Updating to match new version of source page

← Older revision		Revision as of 14:26, 17 October 2024
Line 116:		Line 116:

	• If redundant wiring is required, repeat for receivers 2 and 3.		• If redundant wiring is required, repeat for receivers 2 and 3.

			==== Video tutorial ====
			If you're still having problems with registration and pairing, please follow our video tutorial showing an alternative more straightforward method.

			<html><iframe width="960" height="540" src="https://www.youtube.com/embed/7UiFpxSuor8?si=h4ykDvnJDx9g6Z5o" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></html>

	=== How to set up telemetry altitude data ===		=== How to set up telemetry altitude data ===

FuzzyBot: Updating to match new version of source page

2024-07-23T09:46:33Z

Updating to match new version of source page

← Older revision		Revision as of 11:46, 23 July 2024
Line 166:		Line 166:

	=== EU declaration of conformity ===		=== EU declaration of conformity ===
	KAVAN Europe s.r.o. hereby declares that the radio equipment type R8 and other equipment supplied with it are in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.		KAVAN Europe s.r.o. hereby declares that the radio equipment type R8 and other equipment supplied with it are in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following website: http://www.kavanrc.com/doc. This 2.4GHz radio equipment can be used without prior registration or individual approval in all countries of the European Union.

FuzzyBot: Updating to match new version of source page

2024-07-23T09:43:36Z

Updating to match new version of source page

← Older revision		Revision as of 11:43, 23 July 2024
Line 12:		Line 12:
	Download the latest firmware:		Download the latest firmware:
	* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.9.zip R8/GR8 version 1.0.9]		* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.9.zip R8/GR8 version 1.0.9]
	* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.8.zip R8/GR8 version 1.0.8]

	=== Technical specifications ===		=== Technical specifications ===

FuzzyBot: Updating to match new version of source page

2024-07-23T09:42:25Z

Updating to match new version of source page

← Older revision		Revision as of 11:42, 23 July 2024
Line 8:		Line 8:

	If you have any questions about the R8 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8am–16pm, Monday to Friday).		If you have any questions about the R8 receiver and its operation, please contact the technical and service staff of '''KAVAN Europe s.r.o.''' by e-mail ('''info@kavanrc.com''' for general technical information, '''servis@kavanrc.com''' for service) or by phone ('''+420 466 260 133''' for general technical information, '''+420 463 358 700''' for service), during working hours 8am–16pm, Monday to Friday).

			===Firmware===
			Download the latest firmware:
			* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.9.zip R8/GR8 version 1.0.9]
			* [https://www.kavanrc.com/files/RxFW/FW-TW-R8-GR8-1.0.8.zip R8/GR8 version 1.0.8]

	=== Technical specifications ===		=== Technical specifications ===