KAVAN programming card - Instruction manual - Revision history

Mr. KAVAN at 07:39, 29 January 2026

2026-01-29T07:39:35Z

← Older revision		Revision as of 09:39, 29 January 2026
Line 121:		Line 121:
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
	</translate>		</translate>

			[[Category:Manuals]][[Category:ESCs]][[Category:Accessories]]

Martin: Protected "KAVAN programming card - Instruction manual" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) [cascading]

2024-09-09T05:55:10Z

Protected "KAVAN programming card - Instruction manual" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)) [cascading]

← Older revision		Revision as of 07:55, 9 September 2024
(No difference)

Mrs. Kavan: Marked this version for translation

2024-08-21T08:00:53Z

Marked this version for translation

← Older revision		Revision as of 10:00, 21 August 2024
Line 41:		Line 41:
	'''Battery type''': '''LiPo''' or NiCd/NiMh		'''Battery type''': '''LiPo''' or NiCd/NiMh

			<!--T:20-->
	'''Low Voltage Cut-off type''': '''Reduce Power'''/Hard Cut-off		'''Low Voltage Cut-off type''': '''Reduce Power'''/Hard Cut-off
	* '''Reduce Power''': ESC reduces motor power when the preset Low Voltage Protection Threshold value is reached.		* '''Reduce Power''': ESC reduces motor power when the preset Low Voltage Protection Threshold value is reached.
Line 53:		Line 54:
	'''Soft Acceleration Startup''': '''Normal'''/Soft/Very Soft		'''Soft Acceleration Startup''': '''Normal'''/Soft/Very Soft

			<!--T:21-->
	Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.		Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.

Line 66:		Line 68:
	'''Music/LiPo Cells''':		'''Music/LiPo Cells''':

			<!--T:22-->
	Not used.		Not used.

Line 71:		Line 74:
	'''Option''':		'''Option''':

			<!--T:23-->
	Reserve. Not used.		Reserve. Not used.

Mrs. Kavan: /* Programmable functions of the KAVAN ESC */

2024-08-21T08:00:14Z

Programmable functions of the KAVAN ESC

← Older revision		Revision as of 10:00, 21 August 2024
Line 39:		Line 39:

	<!--T:6-->		<!--T:6-->
	'''Battery type''': '''LiPo''' or NiCd/NiMh ~~====~~		'''Battery type''': '''LiPo''' or NiCd/NiMh
	'''Low Voltage Cut-off type''': '''Reduce Power'''/Hard Cut-off ~~====~~
			'''Low Voltage Cut-off type''': '''Reduce Power'''/Hard Cut-off
	* '''Reduce Power''': ESC reduces motor power when the preset Low Voltage Protection Threshold value is reached.		* '''Reduce Power''': ESC reduces motor power when the preset Low Voltage Protection Threshold value is reached.
	* '''Hard Cut-off''': ESC instantly cuts motor power off when the preset Low Voltage Protection Threshold value is reached		* '''Hard Cut-off''': ESC instantly cuts motor power off when the preset Low Voltage Protection Threshold value is reached

	<!--T:7-->		<!--T:7-->
	'''Low Voltage Protection Threshold''': (Low/'''Medium'''/High) ~~====~~		'''Low Voltage Protection Threshold''': (Low/'''Medium'''/High)
	* '''For Li-xx packs''': the battery cell number is calculated automatically. The Low/Middle/High cut-off voltage for each cell is 2.85/3.15/3.3 V. For example: For a 3S Lipo, when the "Middle" cut-off threshold is set, the cut-off voltage will be 3.15×3=9.45 V.		* '''For Li-xx packs''': the battery cell number is calculated automatically. The Low/Middle/High cut-off voltage for each cell is 2.85/3.15/3.3 V. For example: For a 3S Lipo, when the "Middle" cut-off threshold is set, the cut-off voltage will be 3.15×3=9.45 V.
	* '''For Ni-xx packs''': Low/Middle/High cut-off voltages are 0/50/65 % of the startup voltage (i.e. the initial voltage of the battery pack), and 0 % means the low voltage cut-off function is disabled. For example: For a 6-cell NiMH battery, the fully charged voltage is 1.44×6=8.64 V, when the "Middle" cut-off threshold is set, the cut-off voltage will be: 8.64×50%=4.32 V.		* '''For Ni-xx packs''': Low/Middle/High cut-off voltages are 0/50/65 % of the startup voltage (i.e. the initial voltage of the battery pack), and 0 % means the low voltage cut-off function is disabled. For example: For a 6-cell NiMH battery, the fully charged voltage is 1.44×6=8.64 V, when the "Middle" cut-off threshold is set, the cut-off voltage will be: 8.64×50%=4.32 V.

	<!--T:8-->		<!--T:8-->
	'''Soft Acceleration Startup''': '''Normal'''/Soft/Very Soft ~~====~~		'''Soft Acceleration Startup''': '''Normal'''/Soft/Very Soft

	Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.		Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.

	<!--T:9-->		<!--T:9-->
	'''Timing setup''': '''Low''' / Middle / High ~~====~~		'''Timing setup''': '''Low''' / Middle / High
	* Low (3.75°) – Setting for most 2 pole motors.		* Low (3.75°) – Setting for most 2 pole motors.
	* Middle (15°) - setting for motors with 6 or more poles.		* Middle (15°) - setting for motors with 6 or more poles.
Line 63:		Line 65:
	{{Note\|type=info\|text='''Note:''' run your motor on the ground first after making any changes to your motor timing.}}		{{Note\|type=info\|text='''Note:''' run your motor on the ground first after making any changes to your motor timing.}}
	'''Music/LiPo Cells''':		'''Music/LiPo Cells''':

	Not used.		Not used.

	<!--T:11-->		<!--T:11-->
	'''Option''':		'''Option''':

	Reserve. Not used.		Reserve. Not used.

Mrs. Kavan: Marked this version for translation

2024-08-21T05:12:47Z

Marked this version for translation

← Older revision		Revision as of 07:12, 21 August 2024
Line 1:		Line 1:
	<languages/>		<languages/>
	<translate>		<translate>
			<!--T:1-->
	== Introduction ==		== Introduction ==
	'''Programming Card for KAVAN Pro/Plus brushless electronic speed controllers'''		'''Programming Card for KAVAN Pro/Plus brushless electronic speed controllers'''

			<!--T:2-->
	KAVAN Pro ESC programming card is easy to use and convenient to carry. All of the programmable functions are listed on the programming card.		KAVAN Pro ESC programming card is easy to use and convenient to carry. All of the programmable functions are listed on the programming card.

			<!--T:3-->
	=== Specification ===		=== Specification ===
	{\| class="wikitable"		{\| class="wikitable"
Line 21:		Line 24:
	\|}		\|}

			<!--T:4-->
	=== Front panel ===		=== Front panel ===
	Buttons		Buttons
Line 28:		Line 32:
	* '''OK''' button: send the new settings to your ESC.		* '''OK''' button: send the new settings to your ESC.

			<!--T:5-->
	=== Programmable functions of the KAVAN ESC ===		=== Programmable functions of the KAVAN ESC ===
	'''Brake''': ON/'''OFF'''		'''Brake''': ON/'''OFF'''
Line 33:		Line 38:
	* '''OFF''': Sets the propeller to freewheel when the throttle stick is at the minimum position.		* '''OFF''': Sets the propeller to freewheel when the throttle stick is at the minimum position.

			<!--T:6-->
	'''Battery type''': '''LiPo''' or NiCd/NiMh ====		'''Battery type''': '''LiPo''' or NiCd/NiMh ====
	'''Low Voltage Cut-off type''': '''Reduce Power'''/Hard Cut-off ====		'''Low Voltage Cut-off type''': '''Reduce Power'''/Hard Cut-off ====
Line 38:		Line 44:
	* '''Hard Cut-off''': ESC instantly cuts motor power off when the preset Low Voltage Protection Threshold value is reached		* '''Hard Cut-off''': ESC instantly cuts motor power off when the preset Low Voltage Protection Threshold value is reached

			<!--T:7-->
	'''Low Voltage Protection Threshold''': (Low/'''Medium'''/High) ====		'''Low Voltage Protection Threshold''': (Low/'''Medium'''/High) ====
	* '''For Li-xx packs''': the battery cell number is calculated automatically. The Low/Middle/High cut-off voltage for each cell is 2.85/3.15/3.3 V. For example: For a 3S Lipo, when the "Middle" cut-off threshold is set, the cut-off voltage will be 3.15×3=9.45 V.		* '''For Li-xx packs''': the battery cell number is calculated automatically. The Low/Middle/High cut-off voltage for each cell is 2.85/3.15/3.3 V. For example: For a 3S Lipo, when the "Middle" cut-off threshold is set, the cut-off voltage will be 3.15×3=9.45 V.
	* '''For Ni-xx packs''': Low/Middle/High cut-off voltages are 0/50/65 % of the startup voltage (i.e. the initial voltage of the battery pack), and 0 % means the low voltage cut-off function is disabled. For example: For a 6-cell NiMH battery, the fully charged voltage is 1.44×6=8.64 V, when the "Middle" cut-off threshold is set, the cut-off voltage will be: 8.64×50%=4.32 V.		* '''For Ni-xx packs''': Low/Middle/High cut-off voltages are 0/50/65 % of the startup voltage (i.e. the initial voltage of the battery pack), and 0 % means the low voltage cut-off function is disabled. For example: For a 6-cell NiMH battery, the fully charged voltage is 1.44×6=8.64 V, when the "Middle" cut-off threshold is set, the cut-off voltage will be: 8.64×50%=4.32 V.

			<!--T:8-->
	'''Soft Acceleration Startup''': '''Normal'''/Soft/Very Soft ====		'''Soft Acceleration Startup''': '''Normal'''/Soft/Very Soft ====
	Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.		Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.

			<!--T:9-->
	'''Timing setup''': '''Low''' / Middle / High ====		'''Timing setup''': '''Low''' / Middle / High ====
	* Low (3.75°) – Setting for most 2 pole motors.		* Low (3.75°) – Setting for most 2 pole motors.
Line 51:		Line 60:
	In most cases, middle or low timing works well for all types of motors. However, for high efficiency, we recommend the Low timing setting for 2 pole motors (generally, in-runners) and middle timing for 6 poles and above (generally all outrunners). For higher speeds, High timing can be set. Some motors require different timing setups therefore we suggest you follow the manufacturer-recommended setup.		In most cases, middle or low timing works well for all types of motors. However, for high efficiency, we recommend the Low timing setting for 2 pole motors (generally, in-runners) and middle timing for 6 poles and above (generally all outrunners). For higher speeds, High timing can be set. Some motors require different timing setups therefore we suggest you follow the manufacturer-recommended setup.

			<!--T:10-->
	{{Note\|type=info\|text='''Note:''' run your motor on the ground first after making any changes to your motor timing.}}		{{Note\|type=info\|text='''Note:''' run your motor on the ground first after making any changes to your motor timing.}}
	'''Music/LiPo Cells''':		'''Music/LiPo Cells''':
	Not used.		Not used.

			<!--T:11-->
	'''Option''':		'''Option''':
	Reserve. Not used.		Reserve. Not used.

			<!--T:12-->
	=== Wiring sequence ===		=== Wiring sequence ===
	[[File:Programming Card.png\|right\|frameless\|495x495px]]		[[File:Programming Card.png\|right\|frameless\|495x495px]]
Line 65:		Line 77:
	# The LEDs on the program card will light to show the current programmable values of the ESC.		# The LEDs on the program card will light to show the current programmable values of the ESC.

			<!--T:13-->
	{{Note\|type=info\|text='''Note:''' The sequence of Step 2 and Step 3 cannot be reversed! Otherwise, the program card cannot work properly.}}		{{Note\|type=info\|text='''Note:''' The sequence of Step 2 and Step 3 cannot be reversed! Otherwise, the program card cannot work properly.}}

			<!--T:14-->
	{{Note\|type=error\|text='''Caution:''' Don’t use a battery pack with a voltage higher than 6 V to supply the program card!}}		{{Note\|type=error\|text='''Caution:''' Don’t use a battery pack with a voltage higher than 6 V to supply the program card!}}

			<!--T:15-->
	=== Operation ===		=== Operation ===
	Click the '''Up/Down''' ⯅/⯆ button to select the programmable item, the corresponding LED will blink. Then click the '''Left/right''' ⯇/⯈ button to select the options for this item. The flashing LED shows the value you are just selecting. Finally, click the "'''OK'''" button and the blue LED "Connecting" will blink, which means the new settings are being transmitted to the ESC. When the data transmission is finished, the blue LED stops blinking. That means the new settings are accepted and stored in the ESC.		Click the '''Up/Down''' ⯅/⯆ button to select the programmable item, the corresponding LED will blink. Then click the '''Left/right''' ⯇/⯈ button to select the options for this item. The flashing LED shows the value you are just selecting. Finally, click the "'''OK'''" button and the blue LED "Connecting" will blink, which means the new settings are being transmitted to the ESC. When the data transmission is finished, the blue LED stops blinking. That means the new settings are accepted and stored in the ESC.

			<!--T:16-->
	=== Safety precautions ===		=== Safety precautions ===
	* Do not install the propeller (fixed wing) or drive pinion (helicopter) on the motor when you test the ESC and motor for the first time to verify the correct settings on your radio. Only install your propeller (plane) or pinion (heli) after you have confirmed that the settings on your radio are correct.		* Do not install the propeller (fixed wing) or drive pinion (helicopter) on the motor when you test the ESC and motor for the first time to verify the correct settings on your radio. Only install your propeller (plane) or pinion (heli) after you have confirmed that the settings on your radio are correct.
Line 83:		Line 99:
	* Do not immerse the Card under water, do not allow it to get wet while powered up.		* Do not immerse the Card under water, do not allow it to get wet while powered up.

			<!--T:17-->
	=== Recycling and waste disposal note (European Union) ===		=== Recycling and waste disposal note (European Union) ===
	[[File:WEEE.svg\|right\|frameless\|50x50px]]		[[File:WEEE.svg\|right\|frameless\|50x50px]]
	Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.		Electrical equipment marked with the crossed-out waste bin symbol must not be discarded in the domestic waste; it should be disposed of via the appropriate specialised disposal system. In the countries of the EU (European Union) electrical devices must not be discarded via the normal domestic waste system (WEEE - Waste of Electrical and Electronic Equipment, Directive 2012/19/EU). You can take your unwanted equipment to your nearest public collection point or recycling centre, where it will be disposed of in the proper manner at no charge to you. By disposing of your old equipment in a responsible manner you make an important contribution to the safeguarding of the environment.

			<!--T:18-->
	=== EU declaration of conformity (European Union) ===		=== EU declaration of conformity (European Union) ===
	[[File:CE.svg\|right\|frameless\|50x50px]]		[[File:CE.svg\|right\|frameless\|50x50px]]
	Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN Programming Card''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at http://www.kavanrc.com/doc/.		Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN Programming Card''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at http://www.kavanrc.com/doc/.

			<!--T:19-->
	=== Guarantee ===		=== Guarantee ===
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
	</translate>		</translate>

Mrs. Kavan at 05:12, 21 August 2024

2024-08-21T05:12:38Z

← Older revision		Revision as of 07:12, 21 August 2024
Line 1:		Line 1:
			<languages/>
			<translate>
	== Introduction ==		== Introduction ==
	'''Programming Card for KAVAN Pro/Plus brushless electronic speed controllers'''		'''Programming Card for KAVAN Pro/Plus brushless electronic speed controllers'''
Line 91:		Line 93:
	=== Guarantee ===		=== Guarantee ===
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.
			</translate>

Mr. KAVAN at 05:50, 20 August 2024

2024-08-20T05:50:51Z

← Older revision		Revision as of 07:50, 20 August 2024
Line 27:		Line 27:

	=== Programmable functions of the KAVAN ESC ===		=== Programmable functions of the KAVAN ESC ===
	~~====~~ Brake: ON/OFF ~~====~~		'''Brake''': ON/'''OFF'''
	* '''ON''': Sets the propeller to the brake position when the throttle stick is at the minimum position (Recommended for folding props).		* '''ON''': Sets the propeller to the brake position when the throttle stick is at the minimum position (Recommended for folding props).
	* '''OFF''': Sets the propeller to freewheel when the throttle stick is at the minimum position.		* '''OFF''': Sets the propeller to freewheel when the throttle stick is at the minimum position.

	~~====~~ Battery type: LiPo or NiCd/NiMh ====		'''Battery type''': '''LiPo''' or NiCd/NiMh ====
	~~====~~ Low Voltage Cut-off ~~Type~~: Reduce Power/Hard Cut-off ====		'''Low Voltage Cut-off type''': '''Reduce Power'''/Hard Cut-off ====
	* '''Reduce Power''': ESC reduces motor power when the preset Low Voltage Protection Threshold value is reached.		* '''Reduce Power''': ESC reduces motor power when the preset Low Voltage Protection Threshold value is reached.
	* '''Hard Cut-off''': ESC instantly cuts motor power off when the preset Low Voltage Protection Threshold value is reached		* '''Hard Cut-off''': ESC instantly cuts motor power off when the preset Low Voltage Protection Threshold value is reached

	~~====~~ Low Voltage Protection Threshold: (Low/Medium/High) ====		'''Low Voltage Protection Threshold''': (Low/'''Medium'''/High) ====
	* '''For Li-xx packs''': the battery cell number is calculated automatically. The Low/Middle/High cut-off voltage for each cell is 2.85/3.15/3.3 V. For example: For a 3S Lipo, when the "Middle" cut-off threshold is set, the cut-off voltage will be 3.15×3=9.45 V.		* '''For Li-xx packs''': the battery cell number is calculated automatically. The Low/Middle/High cut-off voltage for each cell is 2.85/3.15/3.3 V. For example: For a 3S Lipo, when the "Middle" cut-off threshold is set, the cut-off voltage will be 3.15×3=9.45 V.
	* '''For Ni-xx packs''': Low/Middle/High cut-off voltages are 0/50/65 % of the startup voltage (i.e. the initial voltage of the battery pack), and 0 % means the low voltage cut-off function is disabled. For example: For a 6-cell NiMH battery, the fully charged voltage is 1.44×6=8.64 V, when the "Middle" cut-off threshold is set, the cut-off voltage will be: 8.64×50%=4.32 V.		* '''For Ni-xx packs''': Low/Middle/High cut-off voltages are 0/50/65 % of the startup voltage (i.e. the initial voltage of the battery pack), and 0 % means the low voltage cut-off function is disabled. For example: For a 6-cell NiMH battery, the fully charged voltage is 1.44×6=8.64 V, when the "Middle" cut-off threshold is set, the cut-off voltage will be: 8.64×50%=4.32 V.
	~~====~~ Soft Acceleration Startup: Normal/Soft/Very Soft ====
			'''Soft Acceleration Startup''': '''Normal'''/Soft/Very Soft ====
	Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.		Normal mode is suitable for fixed-wing aircraft. Soft or Very Soft modes are suitable for helicopters. The initial acceleration of the Soft and Very Soft modes is slower, it takes 1.5 seconds for Soft startup or 3 seconds for Very Soft startup from initial throttle advance to full throttle. If the throttle is completely closed (throttle stick moved to bottom position) and opened again (throttle stick moved to top position) within 3 seconds after the first startup, the re-startup will be temporarily changed to normal mode to get rid of the chance of a crash caused by slow throttle response. This special design is suitable for aerobatic flight when quick throttle response is needed.

	~~====~~ Timing setup: Low / Middle / High ====		'''Timing setup''': '''Low''' / Middle / High ====
	* Low (3.75°) – Setting for most 2 pole motors.		* Low (3.75°) – Setting for most 2 pole motors.
	* Middle (15°) - setting for motors with 6 or more poles.		* Middle (15°) - setting for motors with 6 or more poles.
Line 49:		Line 50:

	{{Note\|type=info\|text='''Note:''' run your motor on the ground first after making any changes to your motor timing.}}		{{Note\|type=info\|text='''Note:''' run your motor on the ground first after making any changes to your motor timing.}}
	~~====~~ Music/LiPo Cells ~~====~~		'''Music/LiPo Cells''':
	Not used.		Not used.
	~~====~~ Option ~~====~~
			'''Option''':
	Reserve. Not used.		Reserve. Not used.

Mr. KAVAN at 12:46, 19 August 2024

2024-08-19T12:46:31Z

← Older revision		Revision as of 14:46, 19 August 2024
Line 55:		Line 55:

	=== Wiring sequence ===		=== Wiring sequence ===
			[[File:Programming Card.png\|right\|frameless\|495x495px]]
	# Disconnect the main battery pack from the ESC		# Disconnect the main battery pack from the ESC
	# For the KAVAN ESC (with a built-in BEC), please disconnect the Rx cable (trio wires) of the ESC from your receiver, and then connect it to the program card at the top right corner position marked with “BEC”.		# For the KAVAN ESC (with a built-in BEC), please disconnect the Rx cable (trio wires) of the ESC from your receiver, and then connect it to the program card at the top right corner position marked with “BEC”.

Mr. KAVAN at 12:28, 19 August 2024

2024-08-19T12:28:59Z

← Older revision		Revision as of 14:28, 19 August 2024
Line 84:		Line 84:
	=== EU declaration of conformity (European Union) ===		=== EU declaration of conformity (European Union) ===
	[[File:CE.svg\|right\|frameless\|50x50px]]		[[File:CE.svg\|right\|frameless\|50x50px]]
	Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN Programming Card''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at www.kavanrc.com/doc/.		Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN Programming Card''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at http://www.kavanrc.com/doc/.

	=== Guarantee ===		=== Guarantee ===
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.

Mr. KAVAN at 12:28, 19 August 2024

2024-08-19T12:28:37Z

← Older revision		Revision as of 14:28, 19 August 2024
Line 84:		Line 84:
	=== EU declaration of conformity (European Union) ===		=== EU declaration of conformity (European Union) ===
	[[File:CE.svg\|right\|frameless\|50x50px]]		[[File:CE.svg\|right\|frameless\|50x50px]]
	Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN ~~Pro~~ Programming Card''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at www.kavanrc.com/doc/.		Hereby, '''KAVAN Europe s.r.o.''' declares that the '''KAVAN Programming Card''' is in compliance with the essential requirements as laid down in the EU directive(s) concerning electromagnetic compatibility. The full text of the EU Declaration of Conformity is available at www.kavanrc.com/doc/.

	=== Guarantee ===		=== Guarantee ===
	The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.		The KAVAN Europe s.r.o. products are covered by a guarantee that fulfils the currently valid legal requirements in your country. If you wish to make a claim under guarantee, please contact the retailer from whom you first purchased the equipment. The guarantee does not cover faults which were caused in the following ways: crashes, improper use, incorrect connection, reversed polarity, maintenance work carried out late, incorrectly or not at all, or by unauthorised personnel, use of other than genuine KAVAN Europe s.r.o. accessories, modifications or repairs which were not carried out by KAVAN Europe s.r.o. or an authorised KAVAN Europe s.r.o., accidental or deliberate damage, defects caused by normal wear and tear, operation outside the Specification, or in conjunction with equipment made by other manufacturers. Please be sure to read the appropriate information sheets in the product documentation.