FuzzyBot: Importing a new version from external source

2025-11-07T13:35:11Z

Importing a new version from external source

← Older revision		Revision as of 15:35, 7 November 2025
Line 5:		Line 5:
	two channel batteries with the same parameters at the same time.		two channel batteries with the same parameters at the same time.
	Connect the charger with the power supply and power on; select		Connect the charger with the power supply and power on; select
	this setting on the advanced setting menu to set the task parameters. (Note: Both batteries have to be connected to the CH1 and CH2		this setting on the advanced setting menu to set the task parameters. {{Note\|type=info\|'''Note:''' Both batteries have to be connected to the CH1 and CH2 outputs before you try to launch the DualTask mode.}}
	outputs before you try to launch the DualTask mode.)
	==== Parallel task ====		==== Parallel task ====
	[[File:C100_-_Parallel.png\|right\|frameless\|500x500px]]		[[File:C100_-_Parallel.png\|right\|frameless\|500x500px]]

FuzzyBot: Importing a new version from external source

2025-11-07T12:28:00Z

Importing a new version from external source

New page

=== Advanced settings ===
Under the standby interface, long press the CH1 and CH2 button at the same time to enter the advanced setting menu.
==== Dual task ====
Select this setting, the charger will charge/discharge/store to the
two channel batteries with the same parameters at the same time.
Connect the charger with the power supply and power on; select
this setting on the advanced setting menu to set the task parameters. (Note: Both batteries have to be connected to the CH1 and CH2
outputs before you try to launch the DualTask mode.)
==== Parallel task ====
[[File:C100_-_Parallel.png|right|frameless|500x500px]]
Select this setting; it could output Max Power to one battery. Find a power splitter or 1/2 power cord, one end connect with the battery, and the other two ends connect with the battery output port. The battery balance port could connect with any of the charger‘s balance port. Connect the charger with the power supply and power on, and connect your battery as required, select this setting on the advanced setting menu to set the task parameters.
==== DC power CH1 ====
The charger CH1 is equivalent to a DC power supply when selecting this function, with output voltage adjustable from 2 to 30V, and current adjustable from 1.0 to 5.0A.
==== System setting menu ====
Under the advanced setting menu, select the system setting into the system setting menu as follows:
===== Lowest input voltage: 10~31V =====
All tasks in operation will be stopped at once and hint warning of low voltage, when the input voltage is lower than the input voltage as set up. It will protect the battery from being discharged when using battery pack as power supply.
===== Max. input power: 100~1100W =====
If the input power is smaller than the max. working power (1000W),
please set up the parameter as the actual output power as max
input, to protect the input power and enable the charger to work
stable.
===== Backlight =====
Adjust the backlight intensity
===== Volume =====
Adjust the sound signal volume
===== Completion tone =====
Select the completion tone.
===== USB charge =====
When this item is set to „Off“, and TYPE-C is the upgrade port.
When this item is set to „On“, TYPE-C acts as a USB charging port and
outputs 5V/2A power.
===== Split screen =====
There are 3 options of 60 seconds, 30 seconds and OFF for automatic split screen setting. You can choose to switch the display of the
main interface from the single-channel parameter interface to Dual
channel (split screen) parameter interface.
You can also select „Off“ to turn off the automatic split screen function.
===== Language =====
Select the desired language of the menu.
===== Theme =====
Select the display style.
===== Keep trickle =====
After charging is complete, choose whether to continue trickle
charging.<br>
The trickle charge function is enabled to maintain the lithium
battery voltage in a fully charged state; this function is enabled by
default.
===== Self-test =====
Perform self-test of the charger.
===== Calibration =====
The input voltage, output voltage and balance voltage of the charger
can be calibrated with this task.
===== System info =====
Hardware/firmware version information.

Translations:KAVAN C100 Duo - Instruction manual/17/en - Revision history

FuzzyBot: Importing a new version from external source

FuzzyBot: Importing a new version from external source