https://wiki.kavanrc.com/index.php?action=history&feed=atom&title=Translations%3AKAVAN_GRT-10_Brushed_-_Instruction_manual%2F21%2Fen 2026-05-22T14:20:53Z Revision history for this page on the wiki MediaWiki 1.43.6 https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_GRT-10_Brushed_-_Instruction_manual/21/en&diff=45821&oldid=prev 2025-11-14T12:30:10Z

<p>Importing a new version from external source</p> <p><b>New page</b></p><div>==== Fail-safe ====<br /> This function dictates what the receiver will do in the event that it loses<br /> signal from the transmitter (the receiver LED starts blinking); it presets the<br /> emergency servo/ESC position. For electric cars we strongly recommend setting the fail-safe for both steering and throttle to neutral (you car will stop<br /> once the signal is lost). For nitro cars the throttle fail-safe should make the<br /> brake engage.<br /> Function Setting:<br /> # Turn on the transmitter and make sure it is connected to the receiver.<br /> # Hold the steering wheel and throttle trigger at the desired fail-safe position.<br /> # Press and hold the BIND button for 3 seconds; the G.LED starts to flash for 2 seconds, indicating that the settings are successful.<br /> {{Note|type=info|&#039;&#039;&#039;Note:&#039;&#039;&#039; The fail-safe function has not been set at the factory by default – you should set it accordingly during the initial set-up of your model. If no failsafe setting has been set, then the receiver will maintain the output of the last signal when the signal is lost.}}<br /> {{Note|type=info|&#039;&#039;&#039;Note:&#039;&#039;&#039; Binding erases the previously set fail-safe stored in the receiver - you have to set the fail-safe again.}}<br /> ==== Beginner mode ====<br /> Beginner mode is designed for the people who are new to the hobby. In this<br /> mode the throttle has been limited to 50 percent.</div>

FuzzyBot