FuzzyBot: Importing a new version from external source

2026-08-06T12:39:50Z

Importing a new version from external source

← Older revision		Revision as of 14:39, 6 August 2026
Line 1:		Line 1:
	~~==== ESC wiring diagram ====~~
	{{Note\|type=warn\|text='''Important:''' The default throttle range of this ESC is from 1100μs to 1940μs (Futaba® standard); users need to calibrate the throttle range when they start to use a new KAVAN Plus brushless ESC or another transmitter.}}		{{Note\|type=warn\|text='''Important:''' The default throttle range of this ESC is from 1100μs to 1940μs (Futaba® standard); users need to calibrate the throttle range when they start to use a new KAVAN Plus brushless ESC or another transmitter.}}
	# Throttle signal cable (white/red/black tri-colour cable): Plug it into the throttle channel on the receiver. The white wire is for transmitting throttle signals, the red & black wires are BEC output wires.		# Throttle signal cable (white/red/black tri-colour cable): Plug it into the throttle channel on the receiver. The white wire is for transmitting throttle signals, the red & black wires are BEC output wires.
	# Reverse brake signal wire/Programming cable (yellow wire):<br> • It must be plugged into any vacant channel on the receiver (when using the Reverse brake mode) to control the ON/OFF of the Reverse brake function.<br>• Connect it to the KAVAN PRO LED programming card if you want to program the ESC.		# Reverse brake signal wire/Programming cable (yellow wire):<br> • It must be plugged into any vacant channel on the receiver (when using the Reverse brake mode) to control the ON/OFF of the Reverse brake function.<br>• Connect it to the KAVAN PRO LED programming card if you want to program the ESC.
	{{Note\|type=error\|text='''Caution:''' Please bear in mind improper polarity or short circuit will damage the ESC therefore it is your responsibility to double check all plugs for proper polarity, and proper connection BEFORE connecting the battery pack for the first time.}}		{{Note\|type=error\|text='''Caution:''' Please bear in mind improper polarity or short circuit will damage the ESC therefore it is your responsibility to double check all plugs for proper polarity, and proper connection BEFORE connecting the battery pack for the first time.}}

FuzzyBot: Importing a new version from external source

2024-05-10T09:29:16Z

Importing a new version from external source

New page

==== ESC wiring diagram ====
{{Note|type=warn|text='''Important:''' The default throttle range of this ESC is from 1100μs to 1940μs (Futaba® standard); users need to calibrate the throttle range when they start to use a new KAVAN Plus brushless ESC or another transmitter.}}
# Throttle signal cable (white/red/black tri-colour cable): Plug it into the throttle channel on the receiver. The white wire is for transmitting throttle signals, the red & black wires are BEC output wires.
# Reverse brake signal wire/Programming cable (yellow wire):<br> • It must be plugged into any vacant channel on the receiver (when using the Reverse brake mode) to control the ON/OFF of the Reverse brake function.<br>• Connect it to the KAVAN PRO LED programming card if you want to program the ESC.
{{Note|type=error|text='''Caution:''' Please bear in mind improper polarity or short circuit will damage the ESC therefore it is your responsibility to double check all plugs for proper polarity, and proper connection BEFORE connecting the battery pack for the first time.}}

Translations:KAVAN Plus ESCs - Instruction manual/7/en - Revision history

FuzzyBot: Importing a new version from external source

FuzzyBot: Importing a new version from external source