FuzzyBot: Importing a new version from external source

2024-08-26T06:36:23Z

Importing a new version from external source

New page

=== Programming the KAVAN Pro ESC with a transmitter ===
[[File:KAVAN Pro - Programming Tx.png|frameless|960x960px]]
==== Entering the programming mode ====
{{Note|type=info|text='''Note:''' Please make sure the throttle channel EPA is set to -100 % when the throttle stick is at the bottom position and +100 % for the top position (or the throttle curve 0–100 %).}}
==== Enter program mode ====
Turn on the transmitter, move the throttle stick to the top position, and connect a battery to the ESC, 2 seconds later, the motor will beep ”B-B-” first, then emit "♪ 56712" 5 seconds later to indicate that you are in the ESC programming mode.
==== Select programmable items ====
After entering the programming, you’ll hear the following 12 kinds of beeps circularly. Move the throttle stick to the bottom position within 3 seconds after you hear some kind of beeps, you’ll enter the corresponding parameter item.
# "B-" Brake Type (1 short beep)
# "B- B-" Brake Force (2 short beeps)
# "B- B- B-" Voltage Cutoff Type (3 short beeps)
# "B- B- B- B-" LiPo Cells (4 short beeps)
# "B——" Cutoff Voltage (1 long beep)
# "B—— B-" BEC Voltage (1 long beep and 1 short beep)
# "B—— B- B-" Start-up Mode (1 long beep and 2 short beeps)
# "B—— B- B- B-" Timing (1 long beep and 3 short beeps)
# "B—— B- B- B- B-" Motor Direction (1 long beep and 4 short beeps)
# "B—— B——" Freewheeling (2 long beeps)
# "B—— B—— B-" Factory Reset (2 long beeps and 1 short beep)
# "B—— B—— B- B-" Exit (2 long beeps & 2 short beeps)

Translations:KAVAN Pro ESCs - Instruction manual/29/en - Revision history

FuzzyBot: Importing a new version from external source