https://wiki.kavanrc.com/index.php?action=history&feed=atom&title=Translations%3AKAVAN_V5_-_Quickstart_guide%2F30%2Fen 2026-04-17T16:52:52Z Revision history for this page on the wiki MediaWiki 1.43.6 https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_V5_-_Quickstart_guide/30/en&diff=47381&oldid=prev 2026-01-23T09:40:44Z

<p>Importing a new version from external source</p> <p><b>New page</b></p><div>* &#039;&#039;&#039;Hold&#039;&#039;&#039;: the receiver maintains the rates as they were before the signal was lost. To use this type, select it from the menu and wait 9 seconds for the Fail-safe setting change to take effect.<br /> * &#039;&#039;&#039;Custom&#039;&#039;&#039;: the receiver keeps the rate value on all channels as you preselect it. Select the Fail-safe setting menu. Switch from Disconnect/Hold/Not Set to „Custom“. Select the channel for which you want to set fail-safe rates and confirm the selection. Then set the rates on each desired channel and confirm the selection. Wait 9 seconds for the Fail-safe setting change to take effect.<br /> * &#039;&#039;&#039;No pulses&#039;&#039;&#039;: when the signal is lost, the receiver does not send a control signal to the rates on any channel. To use this type, select it from the menu and wait 9 seconds for the Fail-safe setting change to take effect.<br /> * &#039;&#039;&#039;Receiver&#039;&#039;&#039;: when the signal is lost, the fail-safe mode set in your receiver is applied.</div>

FuzzyBot