Translations:KAVAN Vibe - Instruction manual/6/en - Revision history

FuzzyBot: Importing a new version from external source

2024-04-22T07:36:01Z

Importing a new version from external source

← Older revision		Revision as of 09:36, 22 April 2024
Line 1:		Line 1:
	=== You will need ===		=== You will need ===
	* At least a four-channel RC kit, a power unit with ~~3-4S~~ LiPo flight pack and servos - refer to "Recommended power systems and servos."		* At least a four-channel RC kit, a power unit with 3–4S LiPo flight pack and servos - refer to "Recommended power systems and servos."
	* '''Regular modeller‘s tools:''' modeller‘s knife, screwdrivers, pliers, electric drill with drill bits, No. 180–360 sandpaper, etc.		* '''Regular modeller‘s tools:''' modeller‘s knife ([https://www.kavanrc.com/item/kavan-knife-with-cutting-mat-156305 KAV66.770]), screwdrivers, pliers, electric drill with drill bits, No. 180–360 sandpaper, etc.
	* '''Glue:''' medium and thin CA glue, accelerator for CA glue, hot melt glue.		* '''Glue:''' medium and thin CA glue ([https://www.kavanrc.com/item/kavan-power-ca-20g-thin-en-152583 KAV56.9951], [https://www.kavanrc.com/item/kavan-power-ca-20g-medium-en-152585 KAV56.9952]), accelerator for CA glue ([https://www.kavanrc.com/item/kavan-ca-activator-spray-150ml-152569 KAV56.9958]/[https://www.kavanrc.com/item/kavan-ca-activator-spray-200ml-152570 KAV56.9959]), hot melt glue.

FuzzyBot: FuzzyBot moved page Translations:Vibe/6/en to Translations:KAVAN Vibe - Instruction manual/6/en without leaving a redirect: Part of translatable page "Vibe"

2024-04-09T13:52:44Z

FuzzyBot moved page Translations:Vibe/6/en to Translations:KAVAN Vibe - Instruction manual/6/en without leaving a redirect: Part of translatable page "Vibe"

← Older revision		Revision as of 15:52, 9 April 2024
(No difference)

FuzzyBot: Importing a new version from external source

2024-04-09T11:33:41Z

Importing a new version from external source

← Older revision		Revision as of 13:33, 9 April 2024
Line 1:		Line 1:
	~~# If you are not an experienced~~ RC ~~pilot~~, ~~plan to have~~ a ~~fully competent pilot check your completed model~~ and ~~help you with your first flights. Even though we have tried~~ to ~~provide you with a thorough instruction manual, RC models are rather complicated,~~ and ~~an experienced modeller can quickly check over your model to ensure your first flights are successful~~.		=== You will need ===
	~~# Please assemble your model according to these instructions. Do not modify or change your model in any way. Doing so may adversely change its flying characteristics.~~		* At least a four-channel RC kit, a power unit with 3-4S LiPo flight pack and servos - refer to "Recommended power systems and servos."
	~~# Before you begin~~, ~~check the entire contents of this kit to make sure no parts are missing or damaged. It will also help you to become familiar~~ with ~~each component of your plane~~. ~~If you find that any of the parts are either missing or damaged~~, ~~contact your dealer immediately for replacement~~.		* '''Regular modeller‘s tools:''' modeller‘s knife, screwdrivers, pliers, electric drill with drill bits, No. 180–360 sandpaper, etc.
	# '''~~Note~~:''' ~~Your dealer cannot accept kits for return if construction has begun.~~		* '''Glue:''' medium and thin CA glue, accelerator for CA glue, hot melt glue.
	~~# Trial fit each part before glueing it in place. Before assembling, make sure you are using the correct part~~ and ~~that it fits well. No amount of~~ glue ~~can make up~~ for ~~a poorly fitting part.~~
	# The manual contains a drawing showing the default Centre of Gravity (CG) position and recommended control surface throws. Please note it is essential to keep the recommended CG position for the first flight, ~~or the model could be unstable, hard to control or even unable to fly. Later, you can fine-tune the CG position to suit your flying style and skills~~.

FuzzyBot: Importing a new version from external source

2024-04-09T11:29:16Z

Importing a new version from external source

New page

# If you are not an experienced RC pilot, plan to have a fully competent pilot check your completed model and help you with your first flights. Even though we have tried to provide you with a thorough instruction manual, RC models are rather complicated, and an experienced modeller can quickly check over your model to ensure your first flights are successful.
# Please assemble your model according to these instructions. Do not modify or change your model in any way. Doing so may adversely change its flying characteristics.
# Before you begin, check the entire contents of this kit to make sure no parts are missing or damaged. It will also help you to become familiar with each component of your plane. If you find that any of the parts are either missing or damaged, contact your dealer immediately for replacement.
# '''Note:''' Your dealer cannot accept kits for return if construction has begun.
# Trial fit each part before glueing it in place. Before assembling, make sure you are using the correct part and that it fits well. No amount of glue can make up for a poorly fitting part.
# The manual contains a drawing showing the default Centre of Gravity (CG) position and recommended control surface throws. Please note it is essential to keep the recommended CG position for the first flight, or the model could be unstable, hard to control or even unable to fly. Later, you can fine-tune the CG position to suit your flying style and skills.