Translations:KAVAN Vibe - Instruction manual/8/en - Revision history

FuzzyBot: Importing a new version from external source

2024-04-22T07:36:01Z

Importing a new version from external source

← Older revision		Revision as of 09:36, 22 April 2024
Line 1:		Line 1:
	=== RC kit installation and pre-flight check ===		=== RC kit installation and pre-flight check ===
	* Refer to the instruction manual of your radio and carefully hook up the on-board electronics. The correct linkage length and control surface neutral position - refer to assembly steps 37, 43 and 45.		* Refer to the instruction manual of your radio and carefully hook up the on-board electronics. The correct linkage length and control surface neutral position - refer to assembly steps '''37''', '''43''' and '''45'''.
	* When everything is correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you need to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm, or move it farther from the control surface on the control horn. And vice versa.		* When everything is correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you need to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm, or move it farther from the control surface on the control horn. And vice versa.

FuzzyBot: FuzzyBot moved page Translations:Vibe/8/en to Translations:KAVAN Vibe - Instruction manual/8/en without leaving a redirect: Part of translatable page "Vibe"

2024-04-09T13:52:45Z

FuzzyBot moved page Translations:Vibe/8/en to Translations:KAVAN Vibe - Instruction manual/8/en without leaving a redirect: Part of translatable page "Vibe"

← Older revision		Revision as of 15:52, 9 April 2024
(No difference)

FuzzyBot: Importing a new version from external source

2024-04-09T11:33:41Z

Importing a new version from external source

← Older revision		Revision as of 13:33, 9 April 2024
Line 1:		Line 1:
	* An RC ~~aeroplane is not a toy! If misused, it can cause serious bodily harm~~ and ~~damage~~ to ~~property. Fly only in a safe place, following all instructions and recommendations in this~~ manual~~. Beware~~ of the ~~propeller! Keep loose items that can get entangled in the propeller away from the spinning propeller, including loose clothing or other objects such as pencils and screwdrivers~~. ~~Ensure that your~~ and ~~other people’s hands~~ and ~~face are kept away from the rotating propeller~~.		=== RC kit installation and pre-flight check ===
	* ~~As the user of this product~~, ~~you are solely responsible for operating it in a manner that does not endanger yourself~~ and ~~others or result~~ in ~~damages to~~ the ~~product or~~ the ~~property~~ of ~~others~~. ~~This model is controlled by a radio signal subject~~ to ~~interference from many sources outside your~~ control~~. This interference can cause momentary loss of~~ the ~~controls, so it is advisable~~ to ~~always keep a safe distance in all directions around your model~~, ~~as this margin will help to avoid collisions~~ or ~~injury.~~		* Refer to the instruction manual of your radio and carefully hook up the on-board electronics. The correct linkage length and control surface neutral position - refer to assembly steps 37, 43 and 45.
	* Never operate your model with low transmitter batteries.		* When everything is correctly connected, turn on your transmitter and plug in the flight pack. Check the neutral positions and throws of all control surfaces. If you need to make the control surface throws smaller, simply move the pushrod closer to the centre on the servo arm, or move it farther from the control surface on the control horn. And vice versa.
	* Always operate your model in an open area away from ~~power lines, cars, traffic, or people. Avoid operating your model in populated areas where injury or damage can occur.~~
	* Carefully follow the ~~directions and warnings for this and any optional support equipment (chargers, rechargeable batteries, etc.) which you use.~~
	* Keep all chemicals, small parts and anything electrical out of the ~~reach of children.~~
	* Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and protected for this purpose.
	* The model is made mainly of plastic - it is not fireproof. ~~It may not be exposed to higher temperatures, otherwise severe distortion of the foam airframe or other damage may occur~~.

FuzzyBot: Importing a new version from external source

2024-04-09T11:29:16Z

Importing a new version from external source

New page

* An RC aeroplane is not a toy! If misused, it can cause serious bodily harm and damage to property. Fly only in a safe place, following all instructions and recommendations in this manual. Beware of the propeller! Keep loose items that can get entangled in the propeller away from the spinning propeller, including loose clothing or other objects such as pencils and screwdrivers. Ensure that your and other people’s hands and face are kept away from the rotating propeller.
* As the user of this product, you are solely responsible for operating it in a manner that does not endanger yourself and others or result in damages to the product or the property of others. This model is controlled by a radio signal subject to interference from many sources outside your control. This interference can cause momentary loss of the controls, so it is advisable to always keep a safe distance in all directions around your model, as this margin will help to avoid collisions or injury.
* Never operate your model with low transmitter batteries.
* Always operate your model in an open area away from power lines, cars, traffic, or people. Avoid operating your model in populated areas where injury or damage can occur.
* Carefully follow the directions and warnings for this and any optional support equipment (chargers, rechargeable batteries, etc.) which you use.
* Keep all chemicals, small parts and anything electrical out of the reach of children.
* Moisture causes damage to electronics. Avoid water exposure to all equipment not specifically designed and protected for this purpose.
* The model is made mainly of plastic - it is not fireproof. It may not be exposed to higher temperatures, otherwise severe distortion of the foam airframe or other damage may occur.