Translations:KAVAN R8 - User manual/21/en: Difference between revisions
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
1. Turn off the | # Turn off the power to the receiver. | ||
# RX 1 '''[Pairing]''': Select '''[Pairing]''' to start the pairing process. Every few seconds, a "Pairing" voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message " Waiting for receiver...". | |||
# Switch on the receiver without holding the F/S pairing button. A window will appear with the message "Selecting Device" and the name of the receiver you have just switched on. | |||
# Scroll to the receiver name and select it. A window will appear with a message that the pairing was successful. | |||
# Turn off the transmitter and receiver. | |||
# Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced. | |||
Latest revision as of 12:30, 11 December 2024
- Turn off the power to the receiver.
- RX 1 [Pairing]: Select [Pairing] to start the pairing process. Every few seconds, a "Pairing" voice alert will sound to confirm that you are in pairing mode. A pop-up window will display the message " Waiting for receiver...".
- Switch on the receiver without holding the F/S pairing button. A window will appear with the message "Selecting Device" and the name of the receiver you have just switched on.
- Scroll to the receiver name and select it. A window will appear with a message that the pairing was successful.
- Turn off the transmitter and receiver.
- Switch on the transmitter and then the receiver. If the green LED on the receiver is lit and the red LED is not lit, the receiver is connected to the transmitter. The pairing of the receiver and transmitter will not need to be repeated unless one is replaced.