Translations:KAVAN FunStik 1280mm kit - Instruction manual/68/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
49. Install your receiver, servos and receiver resp. flight battery. Turn your radio on and set neutral positions of servos. Insert the Z-bend on one end of the rudder, elevator and throttle push rod into the corresponding servo arms, thread the push rods into the respective outer tubes, attach the arms to the servos and secure them with screws. Slide and cyano plastic tubings on the aileron push rods as a means of stiffening. Insert the Z-bends into aileron servo arms.
49. Install your receiver, servos and flight battery. Turn your radio on and set the neutral positions of the servos. Insert the Z-bend on one end of the rudder, elevator and throttle push rod into the corresponding servo arms, thread the push rods into the respective outer tubes, attach the arms to the servos and secure them with screws. Slide and cyano plastic tubings on the aileron push rods as a means of stiffening. Insert the Z-bends into aileron servo arms.

Latest revision as of 09:25, 8 January 2025

Message definition (KAVAN FunStik 1280mm kit - Instruction manual)
49. Install your receiver, servos and flight battery. Turn your radio on and set the neutral positions of the servos. Insert the Z-bend on one end of the rudder, elevator and throttle push rod into the corresponding servo arms, thread the push rods into the respective outer tubes, attach the arms to the servos and secure them with screws. Slide and cyano plastic tubings on the aileron push rods as a means of stiffening. Insert the Z-bends into aileron servo arms.

49. Install your receiver, servos and flight battery. Turn your radio on and set the neutral positions of the servos. Insert the Z-bend on one end of the rudder, elevator and throttle push rod into the corresponding servo arms, thread the push rods into the respective outer tubes, attach the arms to the servos and secure them with screws. Slide and cyano plastic tubings on the aileron push rods as a means of stiffening. Insert the Z-bends into aileron servo arms.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_FunStik_1280mm_kit_-_Instruction_manual/68/en&oldid=29623"