Translations:KAVAN FunStik 1280mm kit - Instruction manual/73/en: Difference between revisions

Latest revision as of 09:25, 8 January 2025

Message definition (KAVAN FunStik 1280mm kit - Instruction manual)

'''Glow engine:''' If you install a brand new engine, you will have to run-in the engine following its instruction manual first. Before take off check the throttle servo function; double-check the idle and full throttle positions are correct. Be sure you can stop the engine by pulling the throttle stick and throttle trim all the way down or using the Throttle Cut function on your radio. Check the correct position of the centre of gravity (CG) – '''marked "'''[[File:CG.svg|frameless|17x17px]]'''"''' on the building plan. Adjust the CG position by moving the flight pack or receiver - if you cannot reach the recommended position, do not hesitate to add an appropriate amount of lead to the nose or tail. An extra couple of grams won't spoil the flying characteristics - but the incorrect CG position is a killer. Fully charge your flight pack and transmitter batteries, check the proper function of your radio and perform the range check of your radio according to its instruction manual. The range has to be almost the same with the motor off and at full throttle (no more than a 10 % decrease is acceptable). DO NOT try to fly unless the range check is 100 % successful.

Glow engine: If you install a brand new engine, you will have to run-in the engine following its instruction manual first. Before take off check the throttle servo function; double-check the idle and full throttle positions are correct. Be sure you can stop the engine by pulling the throttle stick and throttle trim all the way down or using the Throttle Cut function on your radio. Check the correct position of the centre of gravity (CG) – marked "" on the building plan. Adjust the CG position by moving the flight pack or receiver - if you cannot reach the recommended position, do not hesitate to add an appropriate amount of lead to the nose or tail. An extra couple of grams won't spoil the flying characteristics - but the incorrect CG position is a killer. Fully charge your flight pack and transmitter batteries, check the proper function of your radio and perform the range check of your radio according to its instruction manual. The range has to be almost the same with the motor off and at full throttle (no more than a 10 % decrease is acceptable). DO NOT try to fly unless the range check is 100 % successful.

Revision as of 09:24, 30 May 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Latest revision as of 09:25, 8 January 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)
Line 1:		Line 1:
	'''Glow engine:''' If you install a brand new engine, you will have to run-in the engine following its instruction manual first. Before take off check the throttle servo function; double-check the idle and full throttle positions are correct. Be sure you can stop the engine by pulling the throttle stick and throttle trim all the way down or using the Throttle Cut function on your radio. Check the correct position of the centre of gravity (CG) – '''marked "'''[[File:CG.svg\|frameless\|17x17px]]'''"''' on the building plan. Adjust the CG position by moving the flight ~~resp.~~ receiver ~~pack~~ - if you cannot reach the recommended position, do not hesitate to add an appropriate amount of lead to the nose or tail. An extra couple of grams won't spoil the flying characteristics - but the incorrect CG position is a killer. Fully charge your flight pack and transmitter batteries, check the proper function of your radio and perform the range check of your radio according to its instruction manual. The range has to be almost the same with the motor off and at full throttle (no more than 10 % decrease is acceptable). DO NOT try to fly unless the range check is 100 % successful.		'''Glow engine:''' If you install a brand new engine, you will have to run-in the engine following its instruction manual first. Before take off check the throttle servo function; double-check the idle and full throttle positions are correct. Be sure you can stop the engine by pulling the throttle stick and throttle trim all the way down or using the Throttle Cut function on your radio. Check the correct position of the centre of gravity (CG) – '''marked "'''[[File:CG.svg\|frameless\|17x17px]]'''"''' on the building plan. Adjust the CG position by moving the flight pack or receiver - if you cannot reach the recommended position, do not hesitate to add an appropriate amount of lead to the nose or tail. An extra couple of grams won't spoil the flying characteristics - but the incorrect CG position is a killer. Fully charge your flight pack and transmitter batteries, check the proper function of your radio and perform the range check of your radio according to its instruction manual. The range has to be almost the same with the motor off and at full throttle (no more than a 10 % decrease is acceptable). DO NOT try to fly unless the range check is 100 % successful.