Translations:KAVAN Alpha 1500mm - Instruction manual/117/en: Difference between revisions
Importing a new version from external source |
m FuzzyBot moved page Translations:AVAN Alpha 1500mm - Instruction manual/117/en to Translations:KAVAN Alpha 1500mm - Instruction manual/117/en without leaving a redirect: Part of translatable page "AVAN Alpha 1500mm - Instruction manual" |
| (One intermediate revision by the same user not shown) | |
(No difference)
| |
Latest revision as of 13:58, 15 October 2025
- Place the transmitter and the receiver close to each other (within one meter).
- Turn your transmitter ON and then your receiver.
- There is a black binding button on the side of the R8EF receiver; press and hold the receiver binding button for about 2 seconds until the LED starts to blink on the receiver. After about 8 blinks the process is accomplished and the receiver LED will glow red steady.
- Turn the receiver off and then on again. Check the correct operation of all servos.