Translations:KAVAN Alpha 1500mm - Instruction manual/216/en: Difference between revisions

From KAVAN RC Wiki
(Importing a new version from external source)
 
 
(One intermediate revision by the same user not shown)
(No difference)

Latest revision as of 12:58, 15 October 2025

Message definition (KAVAN Alpha 1500mm - Instruction manual)
# Place the transmitter and the receiver close to each other (within one meter). 
# Turn your transmitter ON and then your receiver.
# There is a black binding button on the side of the R8EF receiver; press and hold the receiver binding button for about 2 seconds until the LED starts to blink on the receiver. After about 8 blinks the process is accomplished and the receiver LED will glow red steady.
# Turn the receiver off and then on again. Check the correct operation of all servos.
  1. Place the transmitter and the receiver close to each other (within one meter).
  2. Turn your transmitter ON and then your receiver.
  3. There is a black binding button on the side of the R8EF receiver; press and hold the receiver binding button for about 2 seconds until the LED starts to blink on the receiver. After about 8 blinks the process is accomplished and the receiver LED will glow red steady.
  4. Turn the receiver off and then on again. Check the correct operation of all servos.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Alpha_1500mm_-_Instruction_manual/216/en&oldid=43558"