Translations:KAVAN SLING Mini 616mm - Instruction manual/111/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
# Remove the servo arms from the servos and move carefully the elevator and rudder up&down resp. left&right with your hand repeatedly (10–20 times) to soften the hinge. | |||
# If this does not help or does not help enough, you can cut the elevator and rudder with a sharp modeller’s knife completely and hinge them using clear sticky tape. Model hobby shops usually offer special hinge tapes; but the 3M/Scotch® “Crystal” clear sticky tape (width 20 mm) from your local stationery will work well too. | |||
Latest revision as of 09:55, 16 October 2025
- Remove the servo arms from the servos and move carefully the elevator and rudder up&down resp. left&right with your hand repeatedly (10–20 times) to soften the hinge.
- If this does not help or does not help enough, you can cut the elevator and rudder with a sharp modeller’s knife completely and hinge them using clear sticky tape. Model hobby shops usually offer special hinge tapes; but the 3M/Scotch® “Crystal” clear sticky tape (width 20 mm) from your local stationery will work well too.