Translations:KAVAN FT160AR - Instruction Manual/112/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==== Mixture Control Valve Fine Setting ==== | ==== Mixture Control Valve Fine Setting ==== | ||
Start the engine as described above, slowly close the throttle, and set the idle speed. Hold the model in a horizontal position and slowly lift the nose of the model up. | Start the engine as described above, slowly close the throttle, and set the idle speed. Hold the model in a horizontal position and slowly lift the nose of the model up. | ||
# If the engine revs up, you need to close the mixture control valve and repeat the procedure until the rpm does not change when the model is raised. | |||
# If the engine runs irregularly or stalls, open the mixture control valve slightly. Repeat the procedure again until everything is fine. | |||
Latest revision as of 10:29, 23 October 2025
Mixture Control Valve Fine Setting
Start the engine as described above, slowly close the throttle, and set the idle speed. Hold the model in a horizontal position and slowly lift the nose of the model up.
- If the engine revs up, you need to close the mixture control valve and repeat the procedure until the rpm does not change when the model is raised.
- If the engine runs irregularly or stalls, open the mixture control valve slightly. Repeat the procedure again until everything is fine.