Translations:KAVAN AP09A - Instruction Manual/43/en: Difference between revisions
m FuzzyBot moved page Translations:Kavan AP09 - Instruction Manual/43/en to Translations:KAVAN AP09 - Instruction Manual/43/en without leaving a redirect: Part of translatable page "Kavan AP09 - Instruction Manual" |
m FuzzyBot moved page Translations:KAVAN AP09 - Instruction Manual/43/en to Translations:KAVAN AP09A - Instruction Manual/43/en without leaving a redirect: Part of translatable page "KAVAN AP09 - Instruction Manual" |
||
(No difference)
| |||
Latest revision as of 14:44, 28 January 2026
7. Carburettor Installation
The carburettor is held in position by a cinch bolt and nut. Slide the carburettor into the engine case. Lightly press against the carburettor to slightly compress the O-ring around the base of the carburettor. Tighten the nut on the cinch bolt to hold the carburettor in place. Do NOT over tighten the nut, as this will crush the carburettor base.