Translations:KAVAN R10 - User manual/53/en: Difference between revisions
Importing a new version from external source |
Importing a new version from external source |
||
| Line 1: | Line 1: | ||
=== Self-check (R10 Stabi) === | === Self-check (R10 Stabi) === | ||
# Make sure the model is in a horizontal position on the ground, then put the throttle to 0, and keep the other channels in the centre position. | # Make sure the model is in a horizontal position on the ground, then put the throttle to 0, and keep the other channels in the centre position. | ||
# Move to [System] and enter the [ | # Move to [System] and enter the [SxR Stab] tool, then click [Start] and the blue LED light turns on. Once the blue LED starts flashing, we can calibrate the maximum travel of stick channels (excluding the throttle channel). | ||
# If the calibration is completed, the LED turns off and the servos react left and right to indicate the calibration process is completed. | # If the calibration is completed, the LED turns off and the servos react left and right to indicate the calibration process is completed. | ||
Latest revision as of 12:36, 16 February 2026
Self-check (R10 Stabi)
- Make sure the model is in a horizontal position on the ground, then put the throttle to 0, and keep the other channels in the centre position.
- Move to [System] and enter the [SxR Stab] tool, then click [Start] and the blue LED light turns on. Once the blue LED starts flashing, we can calibrate the maximum travel of stick channels (excluding the throttle channel).
- If the calibration is completed, the LED turns off and the servos react left and right to indicate the calibration process is completed.