Translations:KAVAN V20 + ETHOS™ - User manual/559/en: Difference between revisions

Latest revision as of 10:30, 19 March 2024

Message definition (KAVAN V20 + ETHOS™ - User manual)

The receiver can be moved back to radio A by rebinding it to radio A.
'''Note:''' You do not need to use 'Share' if all your radios are using the same Owner ID / registration number. You can simply put the radio you want to use in bind mode, turn on the receiver, select the receiver in the radio and it will bind with that radio. You can switch to another radio the same way. It is best to keep the model receiver numbers the same when copying the models.

The receiver can be moved back to radio A by rebinding it to radio A.

Note: You do not need to use 'Share' if all your radios are using the same Owner ID / registration number. You can simply put the radio you want to use in bind mode, turn on the receiver, select the receiver in the radio and it will bind with that radio. You can switch to another radio the same way. It is best to keep the model receiver numbers the same when copying the models.

@@ Line 1: / Line 1: @@
-Přijímač lze přesunout zpět na rádio A jeho opětovným párováním na rádio A.
+The receiver can be moved back to radio A by rebinding it to radio A.
-  '''Poznámka:''' Pokud všechna rádia používají stejné ID vlastníka / registrační číslo, nemusíte používat funkci "Sdílet".
+  '''Note:''' You do not need to use 'Share' if all your radios are using the same Owner ID / registration number. You can simply put the radio you want to use in bind mode, turn on the receiver, select the receiver in the radio and it will bind with that radio. You can switch to another radio the same way. It is best to keep the model receiver numbers the same when copying the models.
- Jednoduše můžete rádio, které chcete používat, přepnout do režimu párování, zapnout přijímač, vybrat přijímač v rádiu a ten se s tímto rádiem spojí. Stejným způsobem můžete přepnout na jiné rádio. Při kopírování modelů je nejlepší zachovat stejná čísla přijímačů.
-'''Reset párování'''