Translations:KAVAN Dingo A3 glider kit 796mm - Instruction manual/13/en: Difference between revisions

From KAVAN RC Wiki
(Importing a new version from external source)
 
 
(One intermediate revision by the same user not shown)
(No difference)

Latest revision as of 13:27, 11 December 2024

Message definition (KAVAN Dingo A3 glider kit 796mm - Instruction manual)
Glue the wing main spar '''5''' (3–8 mm spruce stick) into the notches in the upper side of ribs '''1'''. Do not glue it to the root rib '''4''' yet. Glue the gussets 6 in place. Apply some additional glue to all joints if necessary and let cure. Now you can assemble the other half of the wing in the same way. Just remember you are building left and right halves, not two lefts or rights.

Glue the wing main spar 5 (3–8 mm spruce stick) into the notches in the upper side of ribs 1. Do not glue it to the root rib 4 yet. Glue the gussets 6 in place. Apply some additional glue to all joints if necessary and let cure. Now you can assemble the other half of the wing in the same way. Just remember you are building left and right halves, not two lefts or rights.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Dingo_A3_glider_kit_796mm_-_Instruction_manual/13/en&oldid=28049"