Translations:KAVAN Smart PRO Opto ESCs - Instruction manual/192/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| Line 5: | Line 5: | ||
[[File:Smart PRO ESC - FW update.png|center|frameless|960x960px]] | [[File:Smart PRO ESC - FW update.png|center|frameless|960x960px]] | ||
{{Note|type=info|text='''Note:''' | {{Note|type=info|text='''Note:''' | ||
* The | * The Smart PRO-80 and Smart PRO-120/130 do not require connecting the flight pack prior to updating. These controllers are powered directly from the USB interface. | ||
Latest revision as of 10:13, 28 August 2024
- Make sure the flight battery is disconnected and the KAVAN Smart PRO controller is unpowered.
- Connect the USB interface to your computer, start the MAV Manager - Updater and select the correct COM port.
- Connect the controller as shown below - use the red (telemetry) port. The controller will be automatically detected.
- Select the correct *.bin file and press the Update button.
{{Note|type=info|text=Note:
- The Smart PRO-80 and Smart PRO-120/130 do not require connecting the flight pack prior to updating. These controllers are powered directly from the USB interface.