Translations:KAVAN Dingo A3 glider kit 796mm - Instruction manual/12/en: Difference between revisions
m (FuzzyBot moved page Translations:DINGO A3 Glider Kit 796mm - Instruction manual/12/en to Translations:KAVAN DINGO A3 Glider Kit 796mm - Instruction manual/12/en without leaving a redirect: Part of translatable page "DINGO A3 Glider Kit 796mm - Instruction manual") |
m (FuzzyBot moved page Translations:KAVAN DINGO A3 Glider Kit 796mm - Instruction manual/12/en to Translations:KAVAN Dingo A3 glider kit 796mm - Instruction manual/12/en without leaving a redirect: Part of translatable page "KAVAN DINGO A3 Glider Kit 796mm - Instruction manual") |
(No difference)
| |
Latest revision as of 13:27, 11 December 2024
Pin down the pre-shaped balsa leading edge 2 and the trailing edge 3 (please note – there is left and right one – match the notches to the plan). Glue the balsa ribs 1 in place. Glue the balsa root rib 4 between the leading and trailing edges – the bevelled side towards the root of the wing half (Det. F–F).