Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/13/en: Difference between revisions
m (FuzzyBot moved page Translations:TARA Glider Kit A1 (F1H) - Instruction manual/13/en to Translations:KAVAN TARA A1 (F1H) - Instruction manual/13/en without leaving a redirect: Part of translatable page "TARA Glider Kit A1 (F1H) - Instruction manual") |
m (FuzzyBot moved page Translations:KAVAN TARA A1 (F1H) - Instruction manual/13/en to Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/13/en without leaving a redirect: Part of translatable page "KAVAN TARA A1 (F1H) - Instruction manual") |
(No difference)
| |
Latest revision as of 13:29, 11 December 2024
Glue the wing main spar 7 (3×8 mm spruce stick) into the notches in the upper side of ribs (trim the bottom edges slightly to slip easier in). Glue only the bottom of the main spar to ribs 5. Insert partly the wing joiners 42 along the sides of the main spar in order to get the correct alignment in the wide notches (DO NOT glue the joiners yet!). Fit and glue the upper central sheeting 8 and 9 (Det. B–B) in place. Apply some additional glue to all joints if necessary and let cure.