Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/16/en: Difference between revisions
m (FuzzyBot moved page Translations:TARA Glider Kit A1 (F1H) - Instruction manual/16/en to Translations:KAVAN TARA A1 (F1H) - Instruction manual/16/en without leaving a redirect: Part of translatable page "TARA Glider Kit A1 (F1H) - Instruction manual") |
m (FuzzyBot moved page Translations:KAVAN TARA A1 (F1H) - Instruction manual/16/en to Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/16/en without leaving a redirect: Part of translatable page "KAVAN TARA A1 (F1H) - Instruction manual") |
(No difference)
| |
Latest revision as of 13:29, 11 December 2024
Lightly sand the CNC milled balsa ribs 41–46 to remove any imperfections. Pin down the pre-shaped balsa leading edges 48. Glue the balsa ribs 41–46 in place. Bevel the front edge of the ribs in order to match the leading edge 48 perfectly. In similar manner, lightly sand the bevelled root ribs 47 to match the leading and trailing edges and glue them in place (Det. F–F).