Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/23/en: Difference between revisions
m (FuzzyBot moved page Translations:TARA Glider Kit A1 (F1H) - Instruction manual/23/en to Translations:KAVAN TARA A1 (F1H) - Instruction manual/23/en without leaving a redirect: Part of translatable page "TARA Glider Kit A1 (F1H) - Instruction manual") |
m (FuzzyBot moved page Translations:KAVAN TARA A1 (F1H) - Instruction manual/23/en to Translations:KAVAN Tara A1 (F1H) glider kit 1100mm - Instruction manual/23/en without leaving a redirect: Part of translatable page "KAVAN TARA A1 (F1H) - Instruction manual") |
(No difference)
| |
Latest revision as of 13:29, 11 December 2024
Once the glue has cured thoroughly, remove the horizontal tailplane from the building plan. With a sanding block, shape the tips and centre plates as indicated on the plans (Det. A–A). Round the leading and trailing edges and the tips (Det. A–A). The horizontal tailplane has been finished for now. Once covered with the tissue, glue the bamboo dowel (Ø2.5×50 mm) 18 between the plates 17 extending behind the trailing edge by 15 mm.