Translations:KAVAN Smart PRO Temp125C / Temp125SP Temperature sensor - Instruction manual/3/en: Difference between revisions
(Importing a new version from external source) |
(Importing a new version from external source) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
=== Features === | === Features === | ||
* Small dimensions. The sensor is connected directly to the receiver telemetry port. | * Small dimensions. | ||
* The sensor is connected directly to the receiver telemetry port. | |||
* Temperature min/max values are logged. | * Temperature min/max values are logged. | ||
* Automatic telemetry detection: FPort, Duplex EX, Hott, MSB, S.Bus2, P²Bus. | * Automatic telemetry detection: FPort, Duplex EX, Hott, MSB, S.Bus2, P²Bus. | ||
| Line 6: | Line 7: | ||
* Configuration through the transmitter or MAV Manager PC software. | * Configuration through the transmitter or MAV Manager PC software. | ||
* Firmware updates. | * Firmware updates. | ||
* | * Temp125SP: Communication with the Smart PRO controllers. | ||
Latest revision as of 10:53, 27 January 2025
Features
- Small dimensions.
- The sensor is connected directly to the receiver telemetry port.
- Temperature min/max values are logged.
- Automatic telemetry detection: FPort, Duplex EX, Hott, MSB, S.Bus2, P²Bus.
- Configurable alarms on high temperatures.
- Configuration through the transmitter or MAV Manager PC software.
- Firmware updates.
- Temp125SP: Communication with the Smart PRO controllers.