Jump to content

Translations:KAVAN Strike DLG 1498mm - Instruction manual/11/en: Difference between revisions

From KAVAN RC Wiki
← Older edit
VisualWikitext
FuzzyBot (talk | contribs)
14,834 edits
FuzzyBot (talk | contribs)
14,834 edits
Importing a new version from external source
 
Line 1: Line 1:
=== Model assembly ===
=== Model assembly ===
==== Tail Surfaces ====
==== Tail Surfaces ====
* Trial fit the parts of the horizontal stabilizer, elevator, fin and rudder – no glue yet! Sand as necessary to obtain a perfect fit. ('''Fig. 1''')
* Trial fit the parts of the horizontal stabiliser, elevator, fin and rudder – no glue yet! Sand as necessary to obtain a perfect fit. ('''Fig. 1''')
* Roughen the surface of the 3×0.5 mm '''R3''' carbon spar using No. 120 sandpaper and glue it with medium CA to the trailing edge of the fin '''R1'''.  
* Roughen the surface of the 3×0.5 mm '''R3''' carbon spar using No. 120 sandpaper and glue it with medium CA to the trailing edge of the fin '''R1'''.  
* Glue the '''T3''' Lite Ply reinforcement plate into the horizontal stabilizer '''T1'''. Once the glue has cured sand it flush with the stabilizer.
* Glue the '''T3''' Lite Ply reinforcement plate into the horizontal stabilizer '''T1'''. Once the glue has cured sand it flush with the stabiliser.
* Sand the entire surface of the horizontal stabilizer, elevator, fin and rudder with No. 120–150 sandpaper; round the outer edges. Bevel the leading edges of the rudder and elevator referring to the '''Det. D-D'''.
* Sand the entire surface of the horizontal stabiliser, elevator, fin and rudder with No. 120–150 sandpaper; round the outer edges. Bevel the leading edges of the rudder and elevator, referring to the '''Det. D-D'''.
* Put the tail surfaces aside for now; they will be finished after the tailplane seat is installed to the tail boom.
* Put the tail surfaces aside for now; they will be finished after the tailplane seat is installed on the tail boom.

Latest revision as of 12:43, 2 June 2026

Message definition (KAVAN Strike DLG 1498mm - Instruction manual)
=== Model assembly ===
==== Tail Surfaces ====
* Trial fit the parts of the horizontal stabiliser, elevator, fin and rudder – no glue yet! Sand as necessary to obtain a perfect fit. ('''Fig. 1''')
* Roughen the surface of the 3×0.5 mm '''R3''' carbon spar using No. 120 sandpaper and glue it with medium CA to the trailing edge of the fin '''R1'''. 
* Glue the '''T3''' Lite Ply reinforcement plate into the horizontal stabilizer '''T1'''. Once the glue has cured sand it flush with the stabiliser.
* Sand the entire surface of the horizontal stabiliser, elevator, fin and rudder with No. 120–150 sandpaper; round the outer edges. Bevel the leading edges of the rudder and elevator, referring to the '''Det. D-D'''.
* Put the tail surfaces aside for now; they will be finished after the tailplane seat is installed on the tail boom.

Model assembly

Tail Surfaces

  • Trial fit the parts of the horizontal stabiliser, elevator, fin and rudder – no glue yet! Sand as necessary to obtain a perfect fit. (Fig. 1)
  • Roughen the surface of the 3×0.5 mm R3 carbon spar using No. 120 sandpaper and glue it with medium CA to the trailing edge of the fin R1.
  • Glue the T3 Lite Ply reinforcement plate into the horizontal stabilizer T1. Once the glue has cured sand it flush with the stabiliser.
  • Sand the entire surface of the horizontal stabiliser, elevator, fin and rudder with No. 120–150 sandpaper; round the outer edges. Bevel the leading edges of the rudder and elevator, referring to the Det. D-D.
  • Put the tail surfaces aside for now; they will be finished after the tailplane seat is installed on the tail boom.
Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_Strike_DLG_1498mm_-_Instruction_manual/11/en&oldid=50812"