Translations:KAVAN Smart PRO TW30 Power switch with telemetry - Instruction manual/5/en: Difference between revisions

Latest revision as of 13:15, 27 January 2025

Message definition (KAVAN Smart PRO TW30 Power switch with telemetry - Instruction manual)

===TW30 installation===
Plug the device between the receiver and the battery. If you use a BEC, plug the TW30 between the battery and the BEC. Remember, in this case, you need to remove the red wire from the extension between the TW30 telemetry port and the receiver's telemetry port.

TW30 installation

Plug the device between the receiver and the battery. If you use a BEC, plug the TW30 between the battery and the BEC. Remember, in this case, you need to remove the red wire from the extension between the TW30 telemetry port and the receiver's telemetry port.

Revision as of 11:54, 27 January 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Latest revision as of 13:15, 27 January 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)
Line 1:		Line 1:
	===TW30 installation===		===TW30 installation===
	Plug the device between the receiver and the battery. If you use a BEC, plug the ~~Voltario~~ between the battery and the BEC. Remember, in this case, you need to remove the red wire from the extension between the ~~Voltario~~ telemetry port and the receiver's telemetry port.		Plug the device between the receiver and the battery. If you use a BEC, plug the TW30 between the battery and the BEC. Remember, in this case, you need to remove the red wire from the extension between the TW30 telemetry port and the receiver's telemetry port.