Jump to content

Translations:KAVAN AP06A - Instruction Manual/34/en: Difference between revisions

From KAVAN RC Wiki
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
 
FuzzyBot (talk | contribs)
14,395 edits
 
(No difference)

Latest revision as of 11:24, 15 October 2025

Message definition (KAVAN AP06A - Instruction Manual)
==== Engine Bolts and Firewall Requirements ====
The KAVAN AP06 should be mounted to a glass filled nylon motor mount or to an integrated wood beam mount built into the fuselage structure of the aircraft. Use M2.5 socket cap screws, washers and locknuts to mount the engine to the motor mount. If using a glass filled mount, the firewall 3 in the airplane should be aircraft grade plywood no less than 3 mm (1/8”) thick. The firewall should also be reinforced to meet the torque and power of the engine.

Engine Bolts and Firewall Requirements

The KAVAN AP06 should be mounted to a glass filled nylon motor mount or to an integrated wood beam mount built into the fuselage structure of the aircraft. Use M2.5 socket cap screws, washers and locknuts to mount the engine to the motor mount. If using a glass filled mount, the firewall 3 in the airplane should be aircraft grade plywood no less than 3 mm (1/8”) thick. The firewall should also be reinforced to meet the torque and power of the engine.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_AP06A_-_Instruction_Manual/34/en&oldid=40830"