Jump to content

Translations:KAVAN AP09A - Instruction Manual/37/en: Difference between revisions

From KAVAN RC Wiki
FuzzyBot (talk | contribs)
14,395 edits
Importing a new version from external source
 
FuzzyBot (talk | contribs)
14,395 edits
 
(One intermediate revision by the same user not shown)
(No difference)

Latest revision as of 14:44, 28 January 2026

Message definition (KAVAN AP09A - Instruction Manual)
==== 4. Tank Size and Orientation to Carburettor. ====
Ideally, the tank stopper should be level with the needle valve assembly. However, most models will require the tank to be positioned higher than the ideal location. A high positioned tank will pose no problems but can be troublesome for extreme aerobatic flight. The size tank used should be 30 to 110 ml (1 to 4 ounces) according to the model and length of flights desired. A 1 ounce tank should provide between 4 and 5 minutes of run time at full throttle. The fuel pickup inside the tank should be connected to the carburettor’s fuel nipple. The vent for the tank should be connected to the muffler‘s pressure fitting.

4. Tank Size and Orientation to Carburettor.

Ideally, the tank stopper should be level with the needle valve assembly. However, most models will require the tank to be positioned higher than the ideal location. A high positioned tank will pose no problems but can be troublesome for extreme aerobatic flight. The size tank used should be 30 to 110 ml (1 to 4 ounces) according to the model and length of flights desired. A 1 ounce tank should provide between 4 and 5 minutes of run time at full throttle. The fuel pickup inside the tank should be connected to the carburettor’s fuel nipple. The vent for the tank should be connected to the muffler‘s pressure fitting.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_AP09A_-_Instruction_Manual/37/en&oldid=47821"