Translations:KAVAN AP09 - Instruction Manual/44/en: Difference between revisions
(Importing a new version from external source) |
m (FuzzyBot moved page Translations:Kavan AP09 - Instruction Manual/44/en to Translations:KAVAN AP09 - Instruction Manual/44/en without leaving a redirect: Part of translatable page "Kavan AP09 - Instruction Manual") |
(No difference)
| |
Latest revision as of 10:25, 15 October 2025
8. Propeller Installation
The propeller fits onto the engine‘s crankshaft. If it does not fit, use a propeller reamer, tapered reamer to open the hole slightly. Do NOT oversize the hole. Once the propeller has been positioned on the shaft, use the spinner nut to retain the propeller. To tighten the nut, slide a screwdriver or other device through the hole in the end of the nut.