Translations:KAVAN AP09A - Instruction Manual/81/en: Difference between revisions

Latest revision as of 14:44, 28 January 2026

3. With the engine running at full throttle, carefully raise the nose of the model to an angle of about 60 degrees. The mixture shouldn‘t get too lean, but you should hear a slight increase in speed. This is normal. If the engine stalls or loses speed when the model is nose up, the mixture is too lean and the needle valve needs to be opened slightly. The engine must always emit a clear trail of gray smoke when running.

Revision as of 11:23, 6 August 2025 view source FuzzyBot (talk \| contribs) 14,395 edits Importing a new version from external source		Latest revision as of 14:44, 28 January 2026 view source FuzzyBot (talk \| contribs) 14,395 edits m FuzzyBot moved page Translations:KAVAN AP09 - Instruction Manual/81/en to Translations:KAVAN AP09A - Instruction Manual/81/en without leaving a redirect: Part of translatable page "KAVAN AP09 - Instruction Manual"
(2 intermediate revisions by the same user not shown)
Line 1:		Line 1:
	3. With the ~~model‘s~~ nose ~~positioned high (~~60 ~~to 90~~ degrees ~~up from the ground) the engine should not become~~ too lean but ~~may~~ increase in ~~rpm slightly from~~ the ~~setting in step 2. In~~ the nose ~~high position~~, the mixture ~~should not~~ lean ~~past~~ the ~~„peak“ setting~~.		3. With the engine running at full throttle, carefully raise the nose of the model to an angle of about 60 degrees. The mixture shouldn‘t get too lean, but you should hear a slight increase in speed. This is normal. If the engine stalls or loses speed when the model is nose up, the mixture is too lean and the needle valve needs to be opened slightly. The engine must always emit a clear trail of gray smoke when running.