Translations:KAVAN Alpha 1500mm - Instruction manual/110/en: Difference between revisions
m (FuzzyBot moved page Translations:KAVAN Alpha 1500 V2 - Instruction manual/110/en to Translations:AVAN Alpha 1500mm - Instruction manual/110/en without leaving a redirect: Part of translatable page "KAVAN Alpha 1500 V2 - Instruction manual") |
m (FuzzyBot moved page Translations:AVAN Alpha 1500mm - Instruction manual/110/en to Translations:KAVAN Alpha 1500mm - Instruction manual/110/en without leaving a redirect: Part of translatable page "AVAN Alpha 1500mm - Instruction manual") |
(No difference)
| |
Latest revision as of 12:58, 15 October 2025
Final setup
Now is the time for the final setup. Fly your ALPHA 1500 V2 straight into the wind and leave the controls in the neutral position. If the model turns in one direction apply the rudder trim in the opposite direction until ALPHA 1500 V2 flies straight. Without power your model must settle into a gentle glide, not too fast so that it plummets to the ground, and not so slow that the controls feel "soggy" and the model is on the edge of the stall. Apply the elevator trim in the way described in the initial trimming section.