Translations:KAVAN V20 + ETHOS™ - User manual/188/en: Difference between revisions

Latest revision as of 10:30, 19 March 2024

Message definition (KAVAN V20 + ETHOS™ - User manual)

==== RF System ====
This section is used to configure the Owner Registration ID ('''RID'''), and the internal and/or external RF modules. This is also where receiver binding takes place, and receiver options are configured. The RID is an 8 character string that contains a unique random code, which can be changed if desired. This ID becomes the Owner Registration ID ('''UID''') when registering a receiver. Enter the same code in the Owner ID field of your other transmitters you want to use the Smart Share feature with them. This must be done before creating the model you want to use it on.

RF System

This section is used to configure the Owner Registration ID (RID), and the internal and/or external RF modules. This is also where receiver binding takes place, and receiver options are configured. The RID is an 8 character string that contains a unique random code, which can be changed if desired. This ID becomes the Owner Registration ID (UID) when registering a receiver. Enter the same code in the Owner ID field of your other transmitters you want to use the Smart Share feature with them. This must be done before creating the model you want to use it on.

Revision as of 13:37, 14 March 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Latest revision as of 10:30, 19 March 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)
(One intermediate revision by the same user not shown)
Line 1:		Line 1:
	===== '''~~Telemetrie~~''' ~~=====~~		==== RF System ====
	~~Telemetrie slouží k přenosu informací z modelu zpět do vysílače. Tyto informace mohou být poměrně rozsáhlé a zahrnují RSSI (sílu signálu přijímače~~) ~~a kvalitu spojení~~, ~~různá napětí~~, ~~proudy~~ a ~~veškeré další výstupy ze senzorů, jako je poloha GPS~~, ~~nadmořská výška atd~~. ~~Všimněte si, že telemetrické obrazovky jsou nastaveny jako hlavní zobrazení v části~~ '''~~Konfigurace obrazovek~~'''.		This section is used to configure the Owner Registration ID ('''RID'''), and the internal and/or external RF modules. This is also where receiver binding takes place, and receiver options are configured. The RID is an 8 character string that contains a unique random code, which can be changed if desired. This ID becomes the Owner Registration ID ('''UID''') when registering a receiver. Enter the same code in the Owner ID field of your other transmitters you want to use the Smart Share feature with them. This must be done before creating the model you want to use it on.