Translations:KAVAN V20 + ETHOS™ - User manual/267/en: Difference between revisions

From KAVAN RC Wiki
VisualWikitext
(Importing a new version from external source)
 
(Importing a new version from external source)
 
Line 1: Line 1:
===== Výstup1, Výstup2 =====
===== Output1, Output2 =====
Průvodce tvorbou modelu přiřadil křidélkům kanály 1 a 2, protože výchozí pořadí kanálů v nabídce Systém – páky bylo nastaveno na KVPS, tedy křidélka, výškovka, plyn, směrovka. Výchozí hodnotu lze v případě potřeby změnit, ale je třeba věnovat pozornost posouzení jakýchkoli dalších dopadů na provedení změny. Všimněte si, že [ENT_long] na zvoleném výstupním kanálu vás přenese přímo na tuto stránku ve výstupech.
The model creation wizard assigned channels 1 and 2 to the ailerons, because the default channel order in the System – Sticks menu was set to '''AETR''', i.e. ailerons, elevator, throttle, rudder. The default can be altered if required, but care must be exercised to assess any other impacts to making a change here. Note that long pressing '''[ENTER]''' on the selected output channel will take you directly to that page in the Outputs.

Latest revision as of 11:47, 18 March 2024

Message definition (KAVAN V20 + ETHOS™ - User manual)
===== Output1, Output2 =====
The model creation wizard assigned channels 1 and 2 to the ailerons, because the default channel order in the System – Sticks menu was set to '''AETR''', i.e. ailerons, elevator, throttle, rudder. The default can be altered if required, but care must be exercised to assess any other impacts to making a change here. Note that long pressing '''[ENTER]''' on the selected output channel will take you directly to that page in the Outputs.
Output1, Output2

The model creation wizard assigned channels 1 and 2 to the ailerons, because the default channel order in the System – Sticks menu was set to AETR, i.e. ailerons, elevator, throttle, rudder. The default can be altered if required, but care must be exercised to assess any other impacts to making a change here. Note that long pressing [ENTER] on the selected output channel will take you directly to that page in the Outputs.

Retrieved from "https://wiki.kavanrc.com/index.php?title=Translations:KAVAN_V20_%2B_ETHOS™_-_User_manual/267/en&oldid=3742"