Translations:KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual/11/en: Difference between revisions

Revision as of 09:57, 11 September 2024

Message definition (KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual)

==== Wing ====
There are both two wing halves drawn on the building plan, so you can assemble them simultaneously, if you want to. Pin the tapered balsa trailing edge '''3''' to the building plan and mark the position of the notches for ribs with a soft pencil. Remove the trailing edge and use a fine flat file to cut the notches according to the building plan. Lightly sand the CNC milled balsa ribs '''1''' '''(Det. G–G)''' to remove any imperfections.

Wing

There are both two wing halves drawn on the building plan, so you can assemble them simultaneously, if you want to. Pin the tapered balsa trailing edge 3 to the building plan and mark the position of the notches for ribs with a soft pencil. Remove the trailing edge and use a fine flat file to cut the notches according to the building plan. Lightly sand the CNC milled balsa ribs 1 (Det. G–G) to remove any imperfections.