Translations:KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual/17/en: Difference between revisions

Revision as of 09:57, 11 September 2024

Message definition (KAVAN Dara A1 (F1H) glider kit 1200mm - Instruction manual)

Once the glue has cured thoroughly, remove the horizontal tailplane from the building plan. With a sanding block, shape the tips and centre plates as indicated on the plans '''(Det. A–A)'''. Round the leading and trailing edges and the tips '''(Det. A–A)'''. The horizontal tailplane has been finished for now. Once covered with the tissue, glue the bamboo dowel (ø2.5×50 mm) '''18''' between the plates '''17''' extending behind the trailing edge by 15 mm.

Once the glue has cured thoroughly, remove the horizontal tailplane from the building plan. With a sanding block, shape the tips and centre plates as indicated on the plans (Det. A–A). Round the leading and trailing edges and the tips (Det. A–A). The horizontal tailplane has been finished for now. Once covered with the tissue, glue the bamboo dowel (ø2.5×50 mm) 18 between the plates 17 extending behind the trailing edge by 15 mm.