Translations:KAVAN FunStik 1280mm kit - Instruction manual/66/en: Difference between revisions

Latest revision as of 09:25, 8 January 2025

Message definition (KAVAN FunStik 1280mm kit - Instruction manual)

47. '''Glow engine:''' Install the engine mount and your engine with a silencer. Insert and glue the throttle push rod outer tube into the fuselage. Install the throttle servo into the servo tray/switch holder '''70''' and glue the tray into the fuselage ensuring free movement of the throttle push rod. You can fit the receiver battery switch to the tray '''70''' (flipped by a piece of 0.8 mm piano wire from the outside of the fuselage - not supplied in the kit). Assemble the fuel tank and test if it is tight and secure. Install the fuel tank wrapped in thin rubber foam into the fuselage. Hook up all the tubings - use a pressurized fuel system; do not forget a good fuel filter - like [https://www.kavanrc.com/item/aluminum-fuel-filter-1-pcs-109167 KAVAN KAV0019] - between the tank and carburettor.

47. Glow engine: Install the engine mount and your engine with a silencer. Insert and glue the throttle push rod outer tube into the fuselage. Install the throttle servo into the servo tray/switch holder 70 and glue the tray into the fuselage ensuring free movement of the throttle push rod. You can fit the receiver battery switch to the tray 70 (flipped by a piece of 0.8 mm piano wire from the outside of the fuselage - not supplied in the kit). Assemble the fuel tank and test if it is tight and secure. Install the fuel tank wrapped in thin rubber foam into the fuselage. Hook up all the tubings - use a pressurized fuel system; do not forget a good fuel filter - like KAVAN KAV0019 - between the tank and carburettor.

Revision as of 09:24, 30 May 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Latest revision as of 09:25, 8 January 2025 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)
Line 1:		Line 1:
	47. '''Glow engine:''' Install the engine mount and your engine with silencer. Insert and glue the throttle push rod outer tube into the fuselage. Install the throttle servo into the servo tray/switch holder '''70''' and glue the tray into the fuselage ensuring free movement of the throttle push rod. You can fit the receiver battery switch to the tray '''70''' (flipped by a piece of 0.8 mm piano wire from the outside of fuselage - not supplied in the kit). Assemble the fuel tank and test it is tight and secure. Install the fuel tank wrapped in thin rubber foam into the fuselage. Hook up all the tubings - use a pressurized fuel system; do not forget a good fuel filter - like [https://www.kavanrc.com/item/aluminum-fuel-filter-1-pcs-109167 KAVAN KAV0019] - between the tank and carburettor.		47. '''Glow engine:''' Install the engine mount and your engine with a silencer. Insert and glue the throttle push rod outer tube into the fuselage. Install the throttle servo into the servo tray/switch holder '''70''' and glue the tray into the fuselage ensuring free movement of the throttle push rod. You can fit the receiver battery switch to the tray '''70''' (flipped by a piece of 0.8 mm piano wire from the outside of the fuselage - not supplied in the kit). Assemble the fuel tank and test if it is tight and secure. Install the fuel tank wrapped in thin rubber foam into the fuselage. Hook up all the tubings - use a pressurized fuel system; do not forget a good fuel filter - like [https://www.kavanrc.com/item/aluminum-fuel-filter-1-pcs-109167 KAVAN KAV0019] - between the tank and carburettor.