Translations:KAVAN V20 + ETHOS™ - User manual/910/en: Difference between revisions

Latest revision as of 10:30, 19 March 2024

Message definition (KAVAN V20 + ETHOS™ - User manual)

Please note that the ETHOS Device Config screen lets you change Physical IDs and Application IDs. If you have more than one device that have the same function, you would need to connect them one at a time, discover them in Telemetry / Discover New Sensors, then in Device Config change the Physical ID and Application ID, and then go back and rediscover them with the new ID. Please refer to the Telemetry section.

Revision as of 13:38, 14 March 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)		Latest revision as of 10:30, 19 March 2024 (view source) FuzzyBot (talk \| contribs) (Importing a new version from external source)
Line 1:		Line 1:
	~~Vezměte prosím na vědomí, že obrazovka Konfigurace zařízení~~ ETHOS ~~umožňuje měnit fyzická ID a [<s>ID aplikací]</s>~~. ~~Pokud máte více zařízení se stejnou funkcí~~, ~~museli byste je připojit po jednom~~, ~~objevit je v Telemetrie~~ / ~~Objevit nové senzory~~, ~~pak v Konfiguraci zařízení změnit Fyzické~~ ID a ID ~~aplikace a poté se vrátit a znovu je objevit s novým~~ ID. ~~Viz část Telemetrie~~.		Please note that the ETHOS Device Config screen lets you change Physical IDs and Application IDs. If you have more than one device that have the same function, you would need to connect them one at a time, discover them in Telemetry / Discover New Sensors, then in Device Config change the Physical ID and Application ID, and then go back and rediscover them with the new ID. Please refer to the Telemetry section.