Translations:KAVAN Smart PRO Opto ESCs - Instruction manual/71/en: Difference between revisions

VisualWikitext

Latest revision as of 11:21, 13 August 2024

We assume that the throttle and telemetry cables are correctly connected and the transmitter is switched on. Now set the remote control to the "Full throttle" position.
Switch on the controller either by connecting the propulsion or by switching on the external switch.
The motor will start, indicating full-throttle pulse detection. After 3 seconds, another beep will signal entry into the programming menu.
You can now fully turn the throttle down. From the transmitter's main screen, scroll to the right and locate the TextGen menu. If the text menu is activated, the motor will never start revving. To get the motor running normally again, exit the TextGen menu by selecting "Exit" on the main page.
The menu navigation is provided by the transmitter sticks - the elevator stick moves the cursor up/down and the aileron stick changes the selected value.
Configuration changes are saved immediately after any value is modified.

@@ Line 1: / Line 1: @@
-* We assume that the gas and telemetry cables are correctly connected and the transmitter is switched on. Now set the the remote control to the "Full throttle" position.
+* We assume that the throttle and telemetry cables are correctly connected and the transmitter is switched on. Now set the remote control to the "Full throttle" position.
-* Switch on the controller either by connecting the drive set or by switching on the external switch.
+* Switch on the controller either by connecting the propulsion or by switching on the external switch.
-* The motor will start, indicating full throttle pulse detection. After 3 seconds, another beep will announce entry into the programming menu.
+* The motor will start, indicating full-throttle pulse detection. After 3 seconds, another beep will signal entry into the programming menu.
-* You can now fully withdraw the throttle. From the transmitter's main screen, scroll to the right and locate the TextGen menu. If the text menu is activated, the engine will never start to turn. To get the engine running normally again, you must exit the TextGen menu by selecting "Exit" on the main page.
+* You can now fully turn the throttle down. From the transmitter's main screen, scroll to the right and locate the TextGen menu. If the text menu is activated, the motor will never start revving. To get the motor running normally again, exit the TextGen menu by selecting "Exit" on the main page.
-* The menu navigation is provided by the transmitter levers - the elevator lever moves the cursor up/down and the aileron lever changes the selected value.
+* The menu navigation is provided by the transmitter sticks - the elevator stick moves the cursor up/down and the aileron stick changes the selected value.
 * Configuration changes are saved immediately after any value is modified.